Closed geosmall closed 4 years ago
Compile error under recently released Version: 1.8.0
Describe the bug Build error when compiling sketch with "HAL_TIM_MODULE_ONLY" defined in build_opt.h
To Reproduce Compile the following minimal example sketch:
void setup() { // put your setup code here, to run once: } void loop() { // put your main code here, to run repeatedly: }
with the following build_opt.h:
-DHAL_TIM_MODULE_ONLY
Expected behavior Expect to compile without error.
Error when compiling:
Compiling sketch... "C:\Users\geoma\AppData\Local\Arduino15\packages\STM32\tools\xpack-arm-none-eabi-gcc\9.2.1-1.1/bin/arm-none-eabi-g++" -mcpu=cortex-m3 -mthumb "@C:\Users\geoma\AppData\Local\Temp\arduino_build_285411/sketch/build_opt.h" -c -Os -w -std=gnu++14 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -MMD "-IC:\Users\geoma\OneDrive\Arduino\Blink" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/avr" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/stm32" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/stm32/LL" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/stm32/usb" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/stm32/usb/hid" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/stm32/usb/cdc" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\system/Drivers/STM32F1xx_HAL_Driver/Inc" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\system/Drivers/STM32F1xx_HAL_Driver/Src" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\system/STM32F1xx" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\system/Middlewares/ST/STM32_USB_Device_Library/Core/Inc" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\system/Middlewares/ST/STM32_USB_Device_Library/Core/Src" -DSTM32F1xx -DARDUINO=10805 -DARDUINO_BLUEPILL_F103C8 -DARDUINO_ARCH_STM32 -DBOARD_NAME="BLUEPILL_F103C8" -DSTM32F103xB -DHAL_UART_MODULE_ENABLED "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\tools\CMSIS\5.5.1/CMSIS/Core/Include/" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\system/Drivers/CMSIS/Device/ST/STM32F1xx/Include/" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\system/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\tools\CMSIS\5.5.1/CMSIS/DSP/Include" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\variants\PILL_F103XX" "-IC:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\libraries\SrcWrapper\src" "C:\Users\geoma\AppData\Local\Temp\arduino_build_285411\sketch\Blink.ino.cpp" -o "C:\Users\geoma\AppData\Local\Temp\arduino_build_285411\sketch\Blink.ino.cpp.o" In file included from C:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/board.h:8, from C:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/wiring.h:41, from C:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/Arduino.h:32, from C:\Users\geoma\AppData\Local\Temp\arduino_build_285411\sketch\Blink.ino.cpp:1: C:\Users\geoma\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino/stm32/analog.h:55:66: error: 'TimerCompareFormat_t' has not been declared 55 | void pwm_start(PinName pin, uint32_t clock_freq, uint32_t value, TimerCompareFormat_t resolution); |
Screenshots See below attached screencap of error.
Desktop (please complete the following information):
Board (please complete the following information): Seems to be any variant, tested with Bluepill F103 and Wraith32
Hi @geosmall Right, since TimerCompareFormat_t was introduced as a parameter of pwm_start() there is an issue. Same if HAL_TIM_MODULE_ENABLED is not enabled.
TimerCompareFormat_t
pwm_start()
HAL_TIM_MODULE_ENABLED
Compile error under recently released Version: 1.8.0
Describe the bug Build error when compiling sketch with "HAL_TIM_MODULE_ONLY" defined in build_opt.h
To Reproduce Compile the following minimal example sketch:
with the following build_opt.h:
Expected behavior Expect to compile without error.
Error when compiling:
Screenshots See below attached screencap of error.
Desktop (please complete the following information):
Board (please complete the following information): Seems to be any variant, tested with Bluepill F103 and Wraith32