search

strath-sdr / rfsoc_qpsk

PYNQ example of using the RFSoC as a QPSK transceiver.
BSD 3-Clause "New" or "Revised" License
90 stars 45 forks source link

.dcp file #16

Closed tanman777 closed 4 years ago

tanman777 commented 5 years ago

We are working through the qpsk_tx_symbol_gen_bd.xpr and the issue stalls at DCP does not exist.

Could be related to synthesis configuration issues, but would like to see if you could share the .dcp file?

jogomojo commented 5 years ago

Hi tanman,

I'm really not sure what you're asking here. Are you looking at the System Generator files or the Vivado files? What is the issue you have?

Running the make command to build the project (as described in the readme) should produce both the main project .xpr file and the bitstream for you. All the relevant .dcp files should also be generated in this process.

If you want to look at the IP used in the Tx side then you will need to open the AXI_QPSK_Tx.slx file (which is located in the rfsoc_qpsk/boards/ip/sysgen/tx directory) using System Generator.

Josh

tanman777 commented 4 years ago

So we have the full python version of the RFsoc_qpsk files. We were trying to change just the amplitude values on the .bit file. Is there a way to do this that are aware of?

jogomojo commented 4 years ago

Is this the same issue? There is a section of the notebook which allows you to change the transmitter gain using either code or an ipywidget slider.

jogomojo commented 4 years ago

closing this issue due to lack of response.

tanman777 commented 4 years ago

I know you folks closed an old issue and maybe the times that are following might be of concern. But this I've been waiting for different concerns to go from Vivado 18.3 to 19.2 see here.

https://github.com/strath-sdr/rfsoc_qpsk/issues

Tanay....

Tanay Bhatt, Ph.D., P.E. 214-986-2498

From: Josh Goldsmith notifications@github.com Sent: Saturday, February 15, 2020 10:42 AM To: strath-sdr/rfsoc_qpsk rfsoc_qpsk@noreply.github.com Cc: tanman777 tbhatt@astrapi-corp.com; Author author@noreply.github.com Subject: Re: [strath-sdr/rfsoc_qpsk] .dcp file (#16)

Closed #16https://github.com/strath-sdr/rfsoc_qpsk/issues/16.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/strath-sdr/rfsoc_qpsk/issues/16?email_source=notifications&email_token=ANWMGFEZDULRLGRR5YMSP3LRDALP3A5CNFSM4JJ4FDU2YY3PNVWWK3TUL52HS4DFWZEXG43VMVCXMZLOORHG65DJMZUWGYLUNFXW5KTDN5WW2ZLOORPWSZGOWVA764Q#event-3041001330, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANWMGFA4NHELR76ONOPSH4DRDALP3ANCNFSM4JJ4FDUQ.