StrongLoop Arc has been replaced by API Connect. We recommend Arc users move to the Essentials edition of API Connect. If you have questions, please email reachsl@us.ibm.com.
Anthony, Please create the story and add it to planning.
and thank you!
chanda
----- Original message -----
From: Anthony Ettinger/Burlingame/IBM@IBMUS
To: Chanda Dharap/Burlingame/IBM@IBMUS
Cc: aditya.bm@in.ibm.com, Andrew J Hoyt/Poughkeepsie/IBM@IBMUS, anthony@strongloop.com, chanda@strongloop.com, chandrika@strongloop.com, joseph@strongloop.com, Raymond Feng/Burlingame/IBM@IBMUS, raymond@strongloop.com, subramanian.krishnan@in.ibm.com
Subject: Re: How to enable new connectors in loopback arc
Date: Thu, Dec 10, 2015 3:47 PM
Chanda, sounds like we should put a task in the next sprint to address this
Anthony Ettinger
Sr. UI Engineer
StrongLoop an IBM company
Inactive hide details for Chanda Dharap---12/10/2015 03:34:32 PM---Hey, Is there any progress on this? - chandaChanda Dharap---12/10/2015 03:34:32 PM---Hey, Is there any progress on this? - chanda
From: Chanda Dharap/Burlingame/IBM@IBMUS
To: aditya.bm@in.ibm.com
Cc: Andrew J Hoyt/Poughkeepsie/IBM@IBMUS, anthony@strongloop.com, chanda@strongloop.com, chandrika@strongloop.com, joseph@strongloop.com, Raymond Feng/Burlingame/IBM@IBMUS, raymond@strongloop.com, subramanian.krishnan@in.ibm.com
Date: 12/10/2015 03:34 PM
Subject: Re: How to enable new connectors in loopback arc
Hey, Is there any progress on this?
chanda
----- Original message -----
From: "Aditya M Burli" aditya.bm@in.ibm.com
To: Raymond Feng/Burlingame/IBM@IBMUS, raymond@strongloop.com
Cc: Andrew J Hoyt/Poughkeepsie/IBM@IBMUS, Anthony Ettinger anthony@strongloop.com, Chanda Dharap chanda@strongloop.com, Chandrika Gole chandrika@strongloop.com, Joseph Tary joseph@strongloop.com, "Subramanian Krishnan" subramanian.krishnan@in.ibm.com
Subject: Re: How to enable new connectors in loopback arc
Date: Fri, Nov 20, 2015 9:24 AM
Hello Raymond,
Just checking if you have had a chance to take a look at this note and recommend a possible alternative/solution to the issue reported below.
Best Regards,
Adi.
Aditya B M
Bluemix Cloud Services - Development Manager
Phone : +91 98800 28086 (Mobile) | email: aditya.bm@in.ibm.com
From: Nagarjuna Surabathina1/India/IBM
To: Raymond Feng raymond@strongloop.com
Cc: Aditya M Burli/India/IBM@IBMIN, Andrew J Hoyt ahoyt@us.ibm.com, Anthony Ettinger anthony@strongloop.com, Chanda Dharap chanda@strongloop.com, Chandrika Gole chandrika@strongloop.com, Joseph Tary joseph@strongloop.com, Subramanian Krishnan/India/IBM@IBMIN
Date: 11/03/2015 12:35 PM
Subject: Re: How to enable new connectors in loopback arc
Hi Raymond,
As I mentioned in earlier response, I made the change in that file too and was able to see the connector icons in arc.
I was referring to datasource properties in datasource panel
These properties are hard-coded in strong-arc/client/www/scripts/modules/datasource/datasource.react.js(This file is not listed in your response. I figured out this file by doing some investigation).
Ideally we need to show datasource panel properties based on connector type. For example, If I select salesforce connector as connector type then it should show loginUrl, username, password, clientId and clientSecret instead of hardcoded attributes(Database,username and password ).
Please let know how do we get this integration done.
Thanks & Regards,
Nagarjuna S
Software Engineer, ISL
IBM India Private Limited
Bangalore
From: Raymond Feng raymond@strongloop.com
To: Nagarjuna Surabathina1/India/IBM@IBMIN
Cc: Aditya M Burli/India/IBM@IBMIN, Andrew J Hoyt ahoyt@us.ibm.com, Chandrika Gole chandrika@strongloop.com, Subramanian Krishnan/India/IBM@IBMIN, Joseph Tary joseph@strongloop.com, Anthony Ettinger anthony@strongloop.com, Chanda Dharap chanda@strongloop.com
Date: 11/03/2015 06:21 AM
Subject: Re: How to enable new connectors in loopback arc
That was listed in my response.
strong-arc/client/www/scripts/modules/ia/ia.react.js (The list of icons)
I found that the icons are hard-coded. Nagarjuna, can you just add yours there too?
Thanks,
Raymond Feng
Co-Founder and Architect @ StrongLoop, Inc. (An IBM Company)
StrongLoopmakes it easy to develop APIs in Node, plus get DevOps capabilities like monitoring, debugging and clustering.
On Nov 2, 2015, at 7:26 AM, Chanda Dharap chanda@strongloop.com wrote:
Adding Joe and Anthony, they are the Arc Dev team.
chanda
On Monday, November 2, 2015, Nagarjuna Surabathina1 nasuraba@in.ibm.com wrote:
Hi Raymond,
As you suggested, I have made the changes in all four files. Now, I am able to see the connector names and icons in strongloop arc.
We have defined the datasource settings(endpoint information - clientId and clientSecrent in salesforce) in available-connectors.json. However, those settings are not getting displayed in arc datasource panel. Its looking like datasource panel fields are hardcoded in strong-arc/client/www/scripts/modules/datasource/datasource.react.js file. Ideally we need to show datasource panel properties based on connector type. For example, If I select salesforce connector as connector type then it should show loginUrl, username, password, clientId and clientSecret instead of hardcoded attributes(Database,username and password).
Did I miss any step for displaying the datasource properties(from available-connectors.json file) in arc based on connector type?
Thanks & Regards,
Nagarjuna S
Software Engineer, ISL
IBM India Private Limited
Bangalore
Raymond Feng ---10/28/2015 09:28:06 PM---It turns out that there are 4 places that require changes: 1. strong-arc/client/www/scripts/modules/
From: Raymond Feng raymond@strongloop.com
To: Nagarjuna Surabathina1/India/IBM@IBMIN
Cc: Aditya M Burli/India/IBM@IBMIN, Andrew J Hoyt ahoyt@us.ibm.com, Chanda Dharap chanda@strongloop.com, Chandrika Gole chandrika@strongloop.com, Subramanian Krishnan/India/IBM@IBMIN
Date: 10/28/2015 09:28 PM
Subject: Re: How to enable new connectors in loopback arc
It turns out that there are 4 places that require changes:
1. strong-arc/client/www/scripts/modules/datasource/datasource.services.js (The client side list)
2. strong-arc/client/www/scripts/modules/ia/ia.react.js (The list of icons)
3. loopback-workspace/available-connectors.json (The server side list)
4. loopback-workspace/common/models/data-source-definition.js (The default schema)
Thanks,
---
Raymond Feng
Co-Founder and Architect @ StrongLoop, Inc. (An IBM Company)
StrongLoopmakes it easy to develop APIs in Node, plus get DevOps capabilities like monitoring, debugging and clustering.
On Oct 28, 2015, at 12:28 AM, Nagarjuna Surabathina1 nasuraba@in.ibm.com wrote:
Hi Raymond,
I found two copies of loopback-workspace component('strongloop\node_modules\' and 'strongloop\node_modules\strong-arc\node_modules') in my strongloop installation directory. I have updated the db2 connector entry in both the places. Still its not showing in the arc(I have restarted the arc). Please find available-connectors.json for your reference
(See attached file: available-connectors.json)
Further, I found saphana connector entry already exists in available-connectors.json. But I am not able to see saphana connector in arc.
If you feel that it would be better if we have a call for discussing in-detail, please let me know your convenient time for call.
Thanks & Regards,
Nagarjuna S
Software Engineer, ISL
IBM India Private Limited
Bangalore
Raymond Feng ---10/27/2015 09:33:15 PM---Aditya, A patch to https://github.com/strongloop/loopback-workspace/blob/master/available-connectors
From: Raymond Feng raymond@strongloop.com
To: Aditya M Burli/India/IBM@IBMIN
Cc: Nagarjuna Surabathina1/India/IBM@IBMIN, Andrew J Hoyt ahoyt@us.ibm.com, Chandrika Gole chandrika@strongloop.com, Chanda Dharap chanda@strongloop.com
Date: 10/27/2015 09:33 PM
Subject: Re: How to enable new connectors in loopback arc
Aditya,
A patch to https://github.com/strongloop/loopback-workspace/blob/master/available-connectors.jsonshould be good enough.
Thanks,
---
Raymond Feng
Co-Founder and Architect @ StrongLoop, Inc. (An IBM Company)
StrongLoopmakes it easy to develop APIs in Node, plus get DevOps capabilities like monitoring, debugging and clustering.
On Oct 27, 2015, at 6:45 AM, Chanda Dharap chanda@strongloop.com wrote:
Hi Aditya,
Yes I double checked and this is possible, go ahead coordinate with Raymond.
Raymond it would be good for Aditya's team to do this and I'd like this to go through proper QA once discoverable via Arc.
Can you help plan it in a Sprint (Iteration)
- chanda
On Tuesday, October 27, 2015, Aditya M Burli aditya.bm@in.ibm.com wrote:
Hello StrongLoop Team,
We are still awaiting your answer on this question. We are looking at developing a few of our loopback connectors as open source and they should be integrated within Arc too for discovery enablement. That is the urgency of this request.
Thank You!
Best Regards,
Adi.
---
Aditya B M
Manager - Cloud Integration, Cast Iron & Adapters - Development & L3 Service
Phone : +91 80 41927564 (Direct) Extn : 7564 | email: aditya.bm@in.ibm.com
From: AskStrongLoop/Atlanta/IBM
To: callback@strongloop.com
Cc: Nagarjuna Surabathina1/India/IBM@IBMIN, Aditya M Burli/India/IBM@IBMIN
Date: 10/22/2015 03:17 AM
Subject: Fw: How to enable new connectors in loopback arc
Sent by: Rich Hornor
Hi StrongLoop team,
Please assist Nagarjuna and Aditya with enabling the discovery feature in Arc to recognize these new connectors.
Thanks,
AskStrongLoop - Rich
StrongLoop Sellers Resources
----- Forwarded by Rich Hornor/Waltham/IBM on 10/21/2015 05:44 PM -----
From: Nagarjuna Surabathina1/India/IBM@IBMIN
To: AskStrongLoop/Atlanta/IBM@IBMUS
Cc: Aditya M Burli/India/IBM@IBMIN
Date: 10/21/2015 03:04 AM
Subject: Re: How to enable new connectors in loopback arc
Hi,
Support ticket is updated like below:
Hello,
Please direct this inquiry to askstron@us.ibm.comas they are handling all company integrations.
Joe Simonsen
Support ticket information:
We have developed new connectors for DB2,Salesforce and ibmcloudant. We are in the process of delivering these new connectors as open source ASAP. As strongloop is IBM company, we need to enable these connectors also in strongloop arc for supporting the discovery features.
Can you please let us know on how to enable the new developed connectors in arc? If you feel that it would be better if we have a call for discussing in-detail, please let me know your convenient time for call.
Thanks & Regards,
Nagarjuna S
Software Engineer, ISL
IBM India Private Limited
Bangalore
From: AskStrongLoop/Atlanta/IBM@IBMUS
To: Nagarjuna Surabathina1/India/IBM@IBMIN
Date: 10/20/2015 11:57 PM
Subject: Re: How to enable new connectors in loopback arc
Sent by: Rich Hornor@IBMUS
Hi Nagarjuna,
I can't open that link as an IBMer. If you don't receive a response directly from Strongloop in the timeframe needed, let me know and I can escalate for you. Thank you.
Thanks,
AskStrongLoop - Rich
StrongLoop Sellers Resources
From: Nagarjuna Surabathina1/India/IBM@IBMIN
To: AskStrongLoop/Atlanta/IBM@IBMUS
Cc: Aditya M Burli/India/IBM@IBMIN
Date: 10/19/2015 12:32 PM
Subject: How to enable new connectors in loopback arc
Hi,
We are from Andy Hoyt's development team and are in need of a quick answer on this query.
We have raised the support ticket in strongloop support site for "enabling the new connectors in slc arc". Here is the link for support ticket
https://support.strongloop.com/hc/en-us/requests/1176
Please let us know your inputs/comments ASAP.
Thanks & Regards,
Nagarjuna S
Software Engineer, ISL
IBM India Private Limited
Bangalore
##
Chanda Dharap
Director, Engineering
@StrongLoop Inc
(510) 304-3924
chanda@strongloop.com
StrongLoopmakes it easy to develop APIs in Node, plus get DevOps capabilities like monitoring, debugging and clustering.
##
Chanda Dharap
Director, Engineering
@StrongLoop Inc
(510) 304-3924
chanda@strongloop.com
StrongLoopmakes it easy to develop APIs in Node, plus get DevOps capabilities like monitoring, debugging and clustering.
Anthony Ettinger - Re: How to enable new connectors in loopback arc
CN=NALLN259/OU=40/OU=LLN/O=IBMDatabase 'Anthony Ettinger', View 'Inbox', Document 'Re: How to enable new connectors in loopback arc'
Anthony, Please create the story and add it to planning. and thank you!
chanda
----- Original message ----- From: Anthony Ettinger/Burlingame/IBM@IBMUS To: Chanda Dharap/Burlingame/IBM@IBMUS Cc: aditya.bm@in.ibm.com, Andrew J Hoyt/Poughkeepsie/IBM@IBMUS, anthony@strongloop.com, chanda@strongloop.com, chandrika@strongloop.com, joseph@strongloop.com, Raymond Feng/Burlingame/IBM@IBMUS, raymond@strongloop.com, subramanian.krishnan@in.ibm.com Subject: Re: How to enable new connectors in loopback arc Date: Thu, Dec 10, 2015 3:47 PM
Chanda, sounds like we should put a task in the next sprint to address this
Anthony Ettinger Sr. UI Engineer StrongLoop an IBM company
Inactive hide details for Chanda Dharap---12/10/2015 03:34:32 PM---Hey, Is there any progress on this? - chandaChanda Dharap---12/10/2015 03:34:32 PM---Hey, Is there any progress on this? - chanda
From: Chanda Dharap/Burlingame/IBM@IBMUS To: aditya.bm@in.ibm.com Cc: Andrew J Hoyt/Poughkeepsie/IBM@IBMUS, anthony@strongloop.com, chanda@strongloop.com, chandrika@strongloop.com, joseph@strongloop.com, Raymond Feng/Burlingame/IBM@IBMUS, raymond@strongloop.com, subramanian.krishnan@in.ibm.com Date: 12/10/2015 03:34 PM Subject: Re: How to enable new connectors in loopback arc
Hey, Is there any progress on this?
----- Original message ----- From: "Aditya M Burli" aditya.bm@in.ibm.com To: Raymond Feng/Burlingame/IBM@IBMUS, raymond@strongloop.com Cc: Andrew J Hoyt/Poughkeepsie/IBM@IBMUS, Anthony Ettinger anthony@strongloop.com, Chanda Dharap chanda@strongloop.com, Chandrika Gole chandrika@strongloop.com, Joseph Tary joseph@strongloop.com, "Subramanian Krishnan" subramanian.krishnan@in.ibm.com Subject: Re: How to enable new connectors in loopback arc Date: Fri, Nov 20, 2015 9:24 AM
Hello Raymond,
Just checking if you have had a chance to take a look at this note and recommend a possible alternative/solution to the issue reported below.
Best Regards, Adi.
Aditya B M Bluemix Cloud Services - Development Manager Phone : +91 98800 28086 (Mobile) | email: aditya.bm@in.ibm.com
From: Nagarjuna Surabathina1/India/IBM To: Raymond Feng raymond@strongloop.com Cc: Aditya M Burli/India/IBM@IBMIN, Andrew J Hoyt ahoyt@us.ibm.com, Anthony Ettinger anthony@strongloop.com, Chanda Dharap chanda@strongloop.com, Chandrika Gole chandrika@strongloop.com, Joseph Tary joseph@strongloop.com, Subramanian Krishnan/India/IBM@IBMIN Date: 11/03/2015 12:35 PM Subject: Re: How to enable new connectors in loopback arc
Hi Raymond,
As I mentioned in earlier response, I made the change in that file too and was able to see the connector icons in arc.
I was referring to datasource properties in datasource panel
These properties are hard-coded in strong-arc/client/www/scripts/modules/datasource/datasource.react.js(This file is not listed in your response. I figured out this file by doing some investigation).
Ideally we need to show datasource panel properties based on connector type. For example, If I select salesforce connector as connector type then it should show loginUrl, username, password, clientId and clientSecret instead of hardcoded attributes(Database,username and password ).
Please let know how do we get this integration done.
Thanks & Regards,
Nagarjuna S Software Engineer, ISL IBM India Private Limited Bangalore
From: Raymond Feng raymond@strongloop.com To: Nagarjuna Surabathina1/India/IBM@IBMIN Cc: Aditya M Burli/India/IBM@IBMIN, Andrew J Hoyt ahoyt@us.ibm.com, Chandrika Gole chandrika@strongloop.com, Subramanian Krishnan/India/IBM@IBMIN, Joseph Tary joseph@strongloop.com, Anthony Ettinger anthony@strongloop.com, Chanda Dharap chanda@strongloop.com Date: 11/03/2015 06:21 AM Subject: Re: How to enable new connectors in loopback arc
That was listed in my response.
I found that the icons are hard-coded. Nagarjuna, can you just add yours there too?
Thanks,
Raymond Feng Co-Founder and Architect @ StrongLoop, Inc. (An IBM Company)
StrongLoopmakes it easy to develop APIs in Node, plus get DevOps capabilities like monitoring, debugging and clustering.
On Nov 2, 2015, at 7:26 AM, Chanda Dharap chanda@strongloop.com wrote:
Adding Joe and Anthony, they are the Arc Dev team.
On Monday, November 2, 2015, Nagarjuna Surabathina1 nasuraba@in.ibm.com wrote: Hi Raymond,
As you suggested, I have made the changes in all four files. Now, I am able to see the connector names and icons in strongloop arc.
We have defined the datasource settings(endpoint information - clientId and clientSecrent in salesforce) in available-connectors.json. However, those settings are not getting displayed in arc datasource panel. Its looking like datasource panel fields are hardcoded in strong-arc/client/www/scripts/modules/datasource/datasource.react.js file. Ideally we need to show datasource panel properties based on connector type. For example, If I select salesforce connector as connector type then it should show loginUrl, username, password, clientId and clientSecret instead of hardcoded attributes(Database,username and password).
Did I miss any step for displaying the datasource properties(from available-connectors.json file) in arc based on connector type?
Thanks & Regards,
Nagarjuna S Software Engineer, ISL IBM India Private Limited Bangalore
Anthony Ettinger - Re: How to enable new connectors in loopback arc