stuartpittaway diyBMSv4ESP32 issues

stuartpittaway / diyBMSv4ESP32

diyBMS v4 code for the ESP32 and new controller hardware

Other

166 stars 78 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Discharge also a curve for amps go down

#291 Michi202020 opened 1 month ago
1
Upload Config but Failed to save settings

#290 Michi202020 opened 1 month ago
13
State of health and various other fixes (May 2024)

#289 stuartpittaway opened 2 months ago
0
Controller restart when saving config to SD card

#288 jetronic18s closed 2 months ago
3
CAN - Failed to queue CANBUS message (chip=TJA1057GT/3J)

#287 brii999 opened 3 months ago
14
V490 AiO JLC replacements for C20, D1, U2, U3

#286 Sebastian-24a closed 3 months ago
0
Shunt Voltages over 40.96mV can't be measured when using internal shunt

#285 tobimai closed 3 months ago
2
Possible to send 'wrong' voltage info over the CANBUS to inverter ?

#283 deekoowee closed 3 months ago
1
Possible to send 'wrong' voltage info over the CANBUS to inverter ?

#284 deekoowee opened 3 months ago
6
Randomly disabling relay when battery is almost to the top, no rules seem to be afected.

#282 DrBit opened 3 months ago
8
Use 16 Cell chip but change script to 12 Cell

#281 Michi202020 closed 3 months ago
5
Dynamic Charging

#280 buddhafragt opened 4 months ago
4
Loosing wifi on reboot from 5v board power but not usb

#279 dougnutz closed 4 months ago
8
CVL and Venus bug

#278 buddhafragt closed 4 months ago
3
Identifying which battery bank I am looking or working on?

#277 rosspeel opened 4 months ago
1
WIFI Issue - random reboot when STA is lost (investigation)

#276 stuartpittaway opened 5 months ago
31
Suggestion improve Cell runaway function

#275 red0909 opened 5 months ago
6
Temperature display 16S balancer

#274 gartenjoe opened 5 months ago
5
Cell Voltage reading freaks out when Active Balancer kicks in - STM32All-In-One

#273 Ipirk88 closed 5 months ago
7
Cell under temperature external rule hysterisis not working

#272 delboy711 closed 5 months ago
2
SOC issue - store between reboots

#271 lorenzo6201 opened 5 months ago
18
Dashboard get very crowded with more cells.

#270 Ipirk88 opened 5 months ago
5
Enhancement Proposal: Internal BMS Error Handling for Enhanced Safety

#269 lorenzo6201 opened 5 months ago
1
Enhancement Proposal for Current Monitoring Overcurrent Rule

#268 lorenzo6201 opened 5 months ago
2
add MQTT Input frame usable external Current-Sensor

#267 Bingo2023 opened 6 months ago
7
CAN BUS communication

#266 lorenzo6201 opened 6 months ago
0
Polish language

#265 gmirz opened 6 months ago
0
Integrated VW ID3 MEB CMU Slave

#264 Michi202020 opened 6 months ago
3
Models page moule numbers not the same as mqtt

#263 rolfbartels opened 7 months ago
3
V490 / all-in-one monitor board hang and passive balance enabled

#262 stuartpittaway opened 7 months ago
1
Feature request: MQTT Last Will Topic (LWT)

#261 Roelaynd closed 7 months ago
3
WiFI and MQTT don't automatically reconnect when connection is lost

#260 Roelaynd closed 7 months ago
8
Setting Inverter model is not saved

#259 Bingo2023 closed 7 months ago
0
Wifi mqtt fixes/home assistant

#258 stuartpittaway closed 7 months ago
0
Additional temperature rules

#257 jetronic18s opened 7 months ago
0
Web Server Authentication

#256 jetronic18s opened 7 months ago
2
Support EG4 6500-EX All-In-One Inverter over RS485

#255 stuartpittaway opened 7 months ago
0
Add Modbus TCP

#254 Chris87-ux opened 7 months ago
3
Add auto baud rate detection to V490 module

#253 stuartpittaway opened 8 months ago
0
Module V490 "all in one" - cell temperature randomly reports -39C if not connected to probe

#252 stuartpittaway closed 7 months ago
0
improve Victron integration change CAN speed between 500 & 250 kbps

#251 Bingo2023 closed 7 months ago
4
Module V490 (all in one) reports lower cell voltages than actual (parasite voltage reading)

#250 stuartpittaway opened 8 months ago
16
Revisions of ESP32 hardware causes TFTUPD task to crash (ESP32 model 1,Rev 3)

#249 stuartpittaway closed 8 months ago
0
Failed module communication does not trigger rules on reboot

#248 tobimai opened 8 months ago
4
Merge 16S "all-in-one" to master

#247 stuartpittaway closed 8 months ago
0
Reset Daily Amp Hour Count

#246 magpern closed 8 months ago
2
Voltronic and CAN-BUS with WECO or SOL Settings?!

#245 moscito1010 opened 9 months ago
3
Charge and Discharge preveted?

#244 moscito1010 closed 7 months ago
4
All In One temperature issues.

#243 delboy711 closed 8 months ago
4
PYLONTECH ForceH* canbus support

#242 pprasse closed 7 months ago
4