无法挂载主控为asm235cm的移动硬盘盒

经测试无法挂载主控为asm235cm的移动硬盘盒，请问如何解决这个问题呢？

dmesg输出内容复制过来看看

dmesg输出内容复制过来看看

[ 0.095651] usbcore: registered new interface driver usbfs [ 0.096242] usbcore: registered new interface driver hub [ 0.096790] usbcore: registered new device driver usb [ 0.219925] ehci-platform ff5c0000.usb: EHCI Host Controller [ 0.220497] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1 [ 0.221359] ehci-platform ff5c0000.usb: irq 29, io mem 0xff5c0000 [ 0.236283] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.240394] ohci-platform ff5d0000.usb: Generic Platform OHCI controller [ 0.241017] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2 [ 0.241899] ohci-platform ff5d0000.usb: irq 30, io mem 0xff5d0000 [ 0.314036] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.316860] usbcore: registered new interface driver usb-storage [ 0.377226] usbcore: registered new interface driver usbhid [ 0.377717] usbhid: USB HID core driver [ 0.648415] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 1.976941] usbcore: registered new interface driver uas [ 10.710099] usbcore: registered new interface driver r8152 [ 10.728390] usbcore: registered new interface driver ums-alauda [ 10.730374] usbcore: registered new interface driver ums-cypress [ 10.732140] usbcore: registered new interface driver ums-datafab [ 10.733934] usbcore: registered new interface driver ums-freecom [ 10.735710] usbcore: registered new interface driver ums-isd200 [ 10.737497] usbcore: registered new interface driver ums-jumpshot [ 10.739157] usbcore: registered new interface driver ums-karma [ 10.741066] usbcore: registered new interface driver ums-sddr09 [ 10.743020] usbcore: registered new interface driver ums-sddr55 [ 10.744858] usbcore: registered new interface driver ums-usbat [ 10.747523] usbcore: registered new interface driver usblp [ 10.874391] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 10.964619] usbcore: registered new interface driver mt76x2u [ 11.292203] usbcore: registered new interface driver rtl88XXau [ 11.716692] usbcore: registered new interface driver rtl8821cu [ 12.251571] usbcore: registered new interface driver rtl88x2bu [ 12.298547] usbcore: registered new interface driver mt76x0u [ 12.311381] usbcore: registered new interface driver ath9k_htc

dmesg输出内容复制过来看看

root@ImmortalWrt:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.4.143 (runner@fv-az116-991) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r20038-2385ffcedb)) #0 SMP PREEMPT Thu Sep 2 20:13:17 2021 [ 0.000000] Machine model: FriendlyElec NanoPi R2S [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] cma: Reserved 8 MiB at 0x000000003f800000 [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] DMA32 zone: 4088 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 21 pages/cpu s48152 r8192 d29672 u86016 [ 0.000000] pcpu-alloc: s48152 r8192 d29672 u86016 alloc=214096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544 [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1003796K/1046528K available (8190K kernel code, 572K rwdata, 2628K rodata, 1728K init, 739K bss, 34540K reserved, 8192K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x29c/0x3a0 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001599] Console: colour dummy device 80x25 [ 0.002064] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002998] pid_max: default: 32768 minimum: 301 [ 0.003687] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.004365] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.007352] ASID allocator initialised with 32768 entries [ 0.007994] rcu: Hierarchical SRCU implementation. [ 0.009722] smp: Bringing up secondary CPUs ... [ 0.010891] Detected VIPT I-cache on CPU1 [ 0.010976] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.011765] Detected VIPT I-cache on CPU2 [ 0.011826] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.012603] Detected VIPT I-cache on CPU3 [ 0.012664] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.012783] smp: Brought up 1 node, 4 CPUs [ 0.016081] SMP: Total of 4 processors activated. [ 0.016517] CPU features: detected: 32-bit EL0 Support [ 0.016986] CPU features: detected: CRC32 instructions [ 0.025479] CPU: All CPU(s) started at EL2 [ 0.025948] alternatives: patching kernel code [ 0.042658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.043560] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.044788] pinctrl core: initialized pinctrl subsystem [ 0.046486] NET: Registered protocol family 16 [ 0.049290] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.051154] cpuidle: using governor menu [ 0.051795] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.052658] Serial: AMBA PL011 UART driver [ 0.083328] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.083952] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.084557] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085163] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.090366] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.091080] reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 [ 0.093455] iommu: Default domain type: Translated [ 0.095157] SCSI subsystem initialized [ 0.095822] usbcore: registered new interface driver usbfs [ 0.096416] usbcore: registered new interface driver hub [ 0.096957] usbcore: registered new device driver usb [ 0.098417] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.100432] clocksource: Switched to clocksource arch_sys_counter [ 0.101372] VFS: Disk quotas dquot_6.6.0 [ 0.101810] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.108329] thermal_sys: Registered thermal governor 'step_wise' [ 0.108337] thermal_sys: Registered thermal governor 'power_allocator' [ 0.109586] NET: Registered protocol family 2 [ 0.110803] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.112801] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.113601] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.114406] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.115249] TCP: Hash tables configured (established 8192 bind 8192) [ 0.116012] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.116691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.117617] NET: Registered protocol family 1 [ 0.118059] PCI: CLS 0 bytes, default 64 [ 0.119553] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.122262] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.133512] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.134057] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.163466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.164317] io scheduler mq-deadline registered [ 0.171837] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.172505] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.176085] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.178586] printk: console [ttyS2] disabled [ 0.179124] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A [ 0.180006] printk: console [ttyS2] enabled [ 0.180806] printk: bootconsole [uart8250] disabled [ 0.184258] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe] ERROR* No available vop found for display-subsystem. [ 0.185910] lima ff300000.gpu: IRQ pmu not found [ 0.186544] lima ff300000.gpu: IRQ ppmmu2 not found [ 0.186986] lima ff300000.gpu: IRQ ppmmu3 not found [ 0.187426] lima ff300000.gpu: IRQ ppmmu4 not found [ 0.187866] lima ff300000.gpu: IRQ ppmmu5 not found [ 0.188306] lima ff300000.gpu: IRQ ppmmu6 not found [ 0.188780] lima ff300000.gpu: IRQ ppmmu7 not found [ 0.189247] lima ff300000.gpu: gp - mali450 version major 0 minor 0 [ 0.189862] lima ff300000.gpu: pp0 - mali450 version major 0 minor 0 [ 0.190490] lima ff300000.gpu: pp1 - mali450 version major 0 minor 0 [ 0.191106] lima ff300000.gpu: IRQ pp2 not found [ 0.191526] lima ff300000.gpu: IRQ pp3 not found [ 0.191944] lima ff300000.gpu: IRQ pp4 not found [ 0.192356] lima ff300000.gpu: IRQ pp5 not found [ 0.192796] lima ff300000.gpu: IRQ pp6 not found [ 0.193212] lima ff300000.gpu: IRQ pp7 not found [ 0.193634] lima ff300000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 0.194363] lima ff300000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 0.195750] lima ff300000.gpu: bus rate = 163840000 [ 0.196191] lima ff300000.gpu: mod rate = 163840000 [ 0.197021] [drm] Initialized lima 1.0.0 20190217 for ff300000.gpu on minor 0 [ 0.206722] loop: module loaded [ 0.207023] mtip32xx Version 1.3.1 [ 0.210022] libphy: Fixed MDIO Bus: probed [ 0.211999] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.212689] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.213422] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.213993] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing [ 0.216584] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2 [ 0.217708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.218290] ehci-pci: EHCI PCI platform driver [ 0.218751] ehci-platform: EHCI generic platform driver [ 0.221636] ehci-platform ff5c0000.usb: EHCI Host Controller [ 0.222172] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1 [ 0.223034] ehci-platform ff5c0000.usb: irq 29, io mem 0xff5c0000 [ 0.236459] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.237747] hub 1-0:1.0: USB hub found [ 0.238129] hub 1-0:1.0: 1 port detected [ 0.239056] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.239647] ohci-platform: OHCI generic platform driver [ 0.240591] ohci-platform ff5d0000.usb: Generic Platform OHCI controller [ 0.241210] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2 [ 0.242097] ohci-platform ff5d0000.usb: irq 30, io mem 0xff5d0000 [ 0.305189] hub 2-0:1.0: USB hub found [ 0.305576] hub 2-0:1.0: 1 port detected [ 0.307203] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.307717] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3 [ 0.308670] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 0.309572] xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0xff600000 [ 0.311100] hub 3-0:1.0: USB hub found [ 0.311477] hub 3-0:1.0: 1 port detected [ 0.312284] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.312861] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4 [ 0.313555] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.314223] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.315584] hub 4-0:1.0: USB hub found [ 0.315963] hub 4-0:1.0: 1 port detected [ 0.317034] usbcore: registered new interface driver usb-storage [ 0.317779] i2c /dev entries driver [ 0.320876] rk808 1-0018: chip id: 0x8050 [ 0.329563] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 0.330151] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 0.332552] vdd_log: supplied by vdd_5v [ 0.335070] vdd_arm: supplied by vdd_5v [ 0.335707] vcc_ddr: supplied by vdd_5v [ 0.337290] vcc_io_33: supplied by vdd_5v [ 0.339667] vcc_18: supplied by vcc_io_33 [ 0.343874] vcc18_emmc: supplied by vcc_io_33 [ 0.348128] vdd_10: supplied by vdd_5v [ 0.359813] rk808-rtc rk808-rtc: registered as rtc0 [ 0.367126] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0 [ 0.368038] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 8 >= em_cap_state7 [ 0.371217] sdhci: Secure Digital Host Controller Interface driver [ 0.371771] sdhci: Copyright(c) Pierre Ossman [ 0.372155] Synopsys Designware Multimedia Card Interface Driver [ 0.373351] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.374017] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.374618] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.375183] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.376461] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.378097] ledtrig-cpu: registered to indicate activity on CPUs [ 0.378933] usbcore: registered new interface driver usbhid [ 0.379424] usbhid: USB HID core driver [ 0.381624] NET: Registered protocol family 10 [ 0.382916] Segment Routing with IPv6 [ 0.383302] NET: Registered protocol family 17 [ 0.383733] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.384895] 8021q: 802.1Q VLAN Support v1.8 [ 0.399361] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.400026] vcc_sd: supplied by vcc_io_33 [ 0.401464] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.402059] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.402744] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.403363] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input). [ 0.403983] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24). [ 0.404534] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18). [ 0.405042] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no). [ 0.405628] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed [ 0.406235] rk_gmac-dwmac ff540000.ethernet: clock input from PHY [ 0.411781] rk_gmac-dwmac ff540000.ethernet: init for RGMII [ 0.412601] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 0.413240] rk_gmac-dwmac ff540000.ethernet: DWMAC1000 [ 0.413699] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported [ 0.414356] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported [ 0.415012] rk_gmac-dwmac ff540000.ethernet: COE Type 2 [ 0.415472] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported [ 0.416086] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported [ 0.416680] rk_gmac-dwmac ff540000.ethernet: Normal descriptors [ 0.417203] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled [ 0.417715] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.418620] libphy: stmmac: probed [ 0.488141] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.488862] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.489470] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.490022] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.509000] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.521341] rk3328-dmc-freq dmc: current ATF version 0x101 [ 0.525994] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.526703] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.529411] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:08 UTC (1453366208) [ 0.531553] random: fast init done [ 0.532280] Waiting for root device PARTUUID=5452574f-02... [ 0.566553] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 0.567654] mmc0: new high speed SDHC card at address 0002 [ 0.569750] mmcblk0: mmc0:0002 N/A 7.44 GiB [ 0.572585] mmcblk0: p1 p2 [ 0.595489] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 0.599714] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 0.600569] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 0.602303] Freeing unused kernel memory: 1728K [ 0.612630] Run /sbin/init as init process [ 0.648674] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 0.725622] init: Console is alive [ 1.620225] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 1.686796] Key type encrypted registered [ 1.696576] raid6: using algorithm neonx8 gen() 0 MB/s [ 1.697050] raid6: .... xor() 0 MB/s, rmw enabled [ 1.697474] raid6: using neon recovery algorithm [ 1.707683] xor: measuring software checksum speed [ 1.744422] 8regs : 1610.000 MB/sec [ 1.784411] 32regs : 2901.000 MB/sec [ 1.824435] arm64_neon: 3205.000 MB/sec [ 1.824811] xor: using function: arm64_neon (3205.000 MB/sec) [ 1.974931] Btrfs loaded, crc32c=crc32c-generic [ 1.985697] usbcore: registered new interface driver uas [ 1.986542] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 1.987808] init: - preinit - [ 2.199907] random: jshn: uninitialized urandom read (4 bytes read) [ 2.221783] random: jshn: uninitialized urandom read (4 bytes read) [ 2.277205] random: jshn: uninitialized urandom read (4 bytes read) [ 6.413894] mount_root: mounting /dev/root [ 6.418875] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.419661] mount_root: loading kmods from internal overlay [ 6.441715] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 6.443466] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 6.633274] block: attempting to load /etc/config/fstab [ 6.642023] block: extroot: not configured [ 6.694852] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 6.700312] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) [ 7.542959] urandom-seed: Seeding with /etc/urandom.seed [ 7.774203] procd: - early - [ 7.862601] urandom_read: 3 callbacks suppressed [ 7.862610] random: jshn: uninitialized urandom read (4 bytes read) [ 7.932234] random: jshn: uninitialized urandom read (4 bytes read) [ 7.996709] random: jshn: uninitialized urandom read (4 bytes read) [ 8.320727] procd: - ubus - [ 8.373141] procd: - init - [ 8.510996] urngd: v1.0.2 started. [ 8.531098] random: crng init done [ 8.531432] random: 1 urandom warning(s) missed due to ratelimiting [ 8.565918] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 8.630736] kmodloader: loading kernel modules from /etc/modules.d/ [ 9.397209] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: [ 9.486638] zram: Added device: zram0 [ 9.506105] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 9.540869] RPC: Registered named UNIX socket transport module. [ 9.541409] RPC: Registered udp transport module. [ 9.541822] RPC: Registered tcp transport module. [ 9.542234] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.560334] tun: Universal TUN/TAP device driver, 1.6 [ 9.588483] l2tp_core: L2TP core driver, V2.0 [ 9.591199] l2tp_netlink: L2TP netlink interface [ 9.595265] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 9.626516] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.715830] GACT probability on [ 9.717974] Mirror/redirect action on [ 9.730691] u32 classifier [ 9.730949] input device check on [ 9.731270] Actions configured [ 9.797119] Bridge firewalling registered [ 9.799321] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff [ 9.800002] Backport generated by backports.git v5.10.42-1-0-gbee5c545 [ 9.893949] ntfs3: Index binary search [ 9.894321] ntfs3: Hot fix free clusters [ 9.894676] ntfs3: Max link count 1024 [ 9.895007] ntfs3: Activated 32 bits per cluster [ 9.902088] usbcore: registered new interface driver r8152 [ 9.918684] usbcore: registered new interface driver ums-alauda [ 9.920351] usbcore: registered new interface driver ums-cypress [ 9.922086] usbcore: registered new interface driver ums-datafab [ 9.923743] usbcore: registered new interface driver ums-freecom [ 9.925426] usbcore: registered new interface driver ums-isd200 [ 9.927110] usbcore: registered new interface driver ums-jumpshot [ 9.928731] usbcore: registered new interface driver ums-karma [ 9.930933] usbcore: registered new interface driver ums-sddr09 [ 9.932762] usbcore: registered new interface driver ums-sddr55 [ 9.934700] usbcore: registered new interface driver ums-usbat [ 9.936988] usbcore: registered new interface driver usblp [ 9.946055] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 1 [ 9.987639] xt_time: kernel timezone is -0000 [ 10.074485] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 10.110647] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 10.111468] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Random ether addr 9a:6e:f0:c8:d0:66 [ 10.145675] r8152 4-1:1.0 eth1: v1.10.11 [ 10.154136] usbcore: registered new interface driver mt76x2u [ 10.158620] PPP generic driver version 2.4.2 [ 10.160335] PPP MPPE Compression module registered [ 10.162830] NET: Registered protocol family 24 [ 10.473881] usbcore: registered new interface driver rtl88XXau [ 10.892916] RTW: module init start [ 10.893239] RTW: rtl8821cu v5.4.1_28754.20180921_COEX20180712-3232 [ 10.893780] RTW: build time: Sep 2 2021 20:13:17 [ 10.894192] RTW: rtl8821cu BT-Coex version = COEX20180712-3232 [ 10.894934] usbcore: registered new interface driver rtl8821cu [ 10.895450] RTW: module init ret=0 [ 11.425726] RTW: module init start [ 11.426052] RTW: rtl88x2bu v5.6.1_30362.20181109_COEX20180928-6a6a [ 11.426592] RTW: build time: Sep 2 2021 20:13:17 [ 11.427005] RTW: rtl88x2bu BT-Coex version = COEX20180928-6a6a [ 11.427736] usbcore: registered new interface driver rtl88x2bu [ 11.428250] RTW: module init ret=0 [ 11.469013] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.474213] usbcore: registered new interface driver mt76x0u [ 11.486829] usbcore: registered new interface driver ath9k_htc [ 11.487869] kmodloader: done loading kernel modules from /etc/modules.d/ [ 14.225780] xt_FULLCONENAT: RFC3489 Full Cone NAT module [ 14.225780] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang tech@chionlab.moe [ 18.095221] br-lan: port 1(eth1) entered blocking state [ 18.095705] br-lan: port 1(eth1) entered disabled state [ 18.096711] device eth1 entered promiscuous mode [ 18.099426] br-lan: port 1(eth1) entered blocking state [ 18.099909] br-lan: port 1(eth1) entered forwarding state [ 18.166110] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] [ 18.176493] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found [ 18.177196] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW [ 18.177945] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode [ 19.101260] br-lan: port 1(eth1) entered disabled state [ 19.947824] r8152 4-1:1.0 eth1: Promiscuous mode enabled [ 19.949276] r8152 4-1:1.0 eth1: carrier on [ 19.950358] br-lan: port 1(eth1) entered blocking state [ 19.950844] br-lan: port 1(eth1) entered forwarding state [ 19.951813] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 25.341426] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 25.342247] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

没看到有用信息

你拔下来再插上去然后再打印dmesg

没看到有用信息

你拔下来再插上去然后再打印dmesg

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.4.143 (runner@fv-az116-991) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r20038-2385ffcedb)) #0 SMP PREEMPT Thu Sep 2 20:13:17 2021 [ 0.000000] Machine model: FriendlyElec NanoPi R2S [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] cma: Reserved 8 MiB at 0x000000003f800000 [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] DMA32 zone: 4088 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 21 pages/cpu s48152 r8192 d29672 u86016 [ 0.000000] pcpu-alloc: s48152 r8192 d29672 u86016 alloc=214096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544 [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1003796K/1046528K available (8190K kernel code, 572K rwdata, 2628K rodata, 1728K init, 739K bss, 34540K reserved, 8192K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x29c/0x3a0 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001599] Console: colour dummy device 80x25 [ 0.002064] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002998] pid_max: default: 32768 minimum: 301 [ 0.003687] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.004365] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.007352] ASID allocator initialised with 32768 entries [ 0.007994] rcu: Hierarchical SRCU implementation. [ 0.009722] smp: Bringing up secondary CPUs ... [ 0.010891] Detected VIPT I-cache on CPU1 [ 0.010976] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.011765] Detected VIPT I-cache on CPU2 [ 0.011826] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.012603] Detected VIPT I-cache on CPU3 [ 0.012664] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.012783] smp: Brought up 1 node, 4 CPUs [ 0.016081] SMP: Total of 4 processors activated. [ 0.016517] CPU features: detected: 32-bit EL0 Support [ 0.016986] CPU features: detected: CRC32 instructions [ 0.025479] CPU: All CPU(s) started at EL2 [ 0.025948] alternatives: patching kernel code [ 0.042658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.043560] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.044788] pinctrl core: initialized pinctrl subsystem [ 0.046486] NET: Registered protocol family 16 [ 0.049290] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.051154] cpuidle: using governor menu [ 0.051795] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.052658] Serial: AMBA PL011 UART driver [ 0.083328] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.083952] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.084557] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085163] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.090366] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.091080] reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 [ 0.093455] iommu: Default domain type: Translated [ 0.095157] SCSI subsystem initialized [ 0.095822] usbcore: registered new interface driver usbfs [ 0.096416] usbcore: registered new interface driver hub [ 0.096957] usbcore: registered new device driver usb [ 0.098417] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.100432] clocksource: Switched to clocksource arch_sys_counter [ 0.101372] VFS: Disk quotas dquot_6.6.0 [ 0.101810] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.108329] thermal_sys: Registered thermal governor 'step_wise' [ 0.108337] thermal_sys: Registered thermal governor 'power_allocator' [ 0.109586] NET: Registered protocol family 2 [ 0.110803] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.112801] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.113601] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.114406] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.115249] TCP: Hash tables configured (established 8192 bind 8192) [ 0.116012] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.116691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.117617] NET: Registered protocol family 1 [ 0.118059] PCI: CLS 0 bytes, default 64 [ 0.119553] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.122262] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.133512] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.134057] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.163466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.164317] io scheduler mq-deadline registered [ 0.171837] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.172505] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.176085] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.178586] printk: console [ttyS2] disabled [ 0.179124] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A [ 0.180006] printk: console [ttyS2] enabled [ 0.180806] printk: bootconsole [uart8250] disabled [ 0.184258] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe] ERROR* No available vop found for display-subsystem. [ 0.185910] lima ff300000.gpu: IRQ pmu not found [ 0.186544] lima ff300000.gpu: IRQ ppmmu2 not found [ 0.186986] lima ff300000.gpu: IRQ ppmmu3 not found [ 0.187426] lima ff300000.gpu: IRQ ppmmu4 not found [ 0.187866] lima ff300000.gpu: IRQ ppmmu5 not found [ 0.188306] lima ff300000.gpu: IRQ ppmmu6 not found [ 0.188780] lima ff300000.gpu: IRQ ppmmu7 not found [ 0.189247] lima ff300000.gpu: gp - mali450 version major 0 minor 0 [ 0.189862] lima ff300000.gpu: pp0 - mali450 version major 0 minor 0 [ 0.190490] lima ff300000.gpu: pp1 - mali450 version major 0 minor 0 [ 0.191106] lima ff300000.gpu: IRQ pp2 not found [ 0.191526] lima ff300000.gpu: IRQ pp3 not found [ 0.191944] lima ff300000.gpu: IRQ pp4 not found [ 0.192356] lima ff300000.gpu: IRQ pp5 not found [ 0.192796] lima ff300000.gpu: IRQ pp6 not found [ 0.193212] lima ff300000.gpu: IRQ pp7 not found [ 0.193634] lima ff300000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 0.194363] lima ff300000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 0.195750] lima ff300000.gpu: bus rate = 163840000 [ 0.196191] lima ff300000.gpu: mod rate = 163840000 [ 0.197021] [drm] Initialized lima 1.0.0 20190217 for ff300000.gpu on minor 0 [ 0.206722] loop: module loaded [ 0.207023] mtip32xx Version 1.3.1 [ 0.210022] libphy: Fixed MDIO Bus: probed [ 0.211999] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.212689] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.213422] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.213993] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing [ 0.216584] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2 [ 0.217708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.218290] ehci-pci: EHCI PCI platform driver [ 0.218751] ehci-platform: EHCI generic platform driver [ 0.221636] ehci-platform ff5c0000.usb: EHCI Host Controller [ 0.222172] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1 [ 0.223034] ehci-platform ff5c0000.usb: irq 29, io mem 0xff5c0000 [ 0.236459] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.237747] hub 1-0:1.0: USB hub found [ 0.238129] hub 1-0:1.0: 1 port detected [ 0.239056] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.239647] ohci-platform: OHCI generic platform driver [ 0.240591] ohci-platform ff5d0000.usb: Generic Platform OHCI controller [ 0.241210] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2 [ 0.242097] ohci-platform ff5d0000.usb: irq 30, io mem 0xff5d0000 [ 0.305189] hub 2-0:1.0: USB hub found [ 0.305576] hub 2-0:1.0: 1 port detected [ 0.307203] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.307717] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3 [ 0.308670] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 0.309572] xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0xff600000 [ 0.311100] hub 3-0:1.0: USB hub found [ 0.311477] hub 3-0:1.0: 1 port detected [ 0.312284] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.312861] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4 [ 0.313555] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.314223] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.315584] hub 4-0:1.0: USB hub found [ 0.315963] hub 4-0:1.0: 1 port detected [ 0.317034] usbcore: registered new interface driver usb-storage [ 0.317779] i2c /dev entries driver [ 0.320876] rk808 1-0018: chip id: 0x8050 [ 0.329563] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 0.330151] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 0.332552] vdd_log: supplied by vdd_5v [ 0.335070] vdd_arm: supplied by vdd_5v [ 0.335707] vcc_ddr: supplied by vdd_5v [ 0.337290] vcc_io_33: supplied by vdd_5v [ 0.339667] vcc_18: supplied by vcc_io_33 [ 0.343874] vcc18_emmc: supplied by vcc_io_33 [ 0.348128] vdd_10: supplied by vdd_5v [ 0.359813] rk808-rtc rk808-rtc: registered as rtc0 [ 0.367126] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0 [ 0.368038] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 8 >= em_cap_state7 [ 0.371217] sdhci: Secure Digital Host Controller Interface driver [ 0.371771] sdhci: Copyright(c) Pierre Ossman [ 0.372155] Synopsys Designware Multimedia Card Interface Driver [ 0.373351] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.374017] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.374618] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.375183] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.376461] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.378097] ledtrig-cpu: registered to indicate activity on CPUs [ 0.378933] usbcore: registered new interface driver usbhid [ 0.379424] usbhid: USB HID core driver [ 0.381624] NET: Registered protocol family 10 [ 0.382916] Segment Routing with IPv6 [ 0.383302] NET: Registered protocol family 17 [ 0.383733] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.384895] 8021q: 802.1Q VLAN Support v1.8 [ 0.399361] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.400026] vcc_sd: supplied by vcc_io_33 [ 0.401464] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.402059] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.402744] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.403363] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input). [ 0.403983] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24). [ 0.404534] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18). [ 0.405042] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no). [ 0.405628] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed [ 0.406235] rk_gmac-dwmac ff540000.ethernet: clock input from PHY [ 0.411781] rk_gmac-dwmac ff540000.ethernet: init for RGMII [ 0.412601] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 0.413240] rk_gmac-dwmac ff540000.ethernet: DWMAC1000 [ 0.413699] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported [ 0.414356] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported [ 0.415012] rk_gmac-dwmac ff540000.ethernet: COE Type 2 [ 0.415472] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported [ 0.416086] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported [ 0.416680] rk_gmac-dwmac ff540000.ethernet: Normal descriptors [ 0.417203] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled [ 0.417715] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.418620] libphy: stmmac: probed [ 0.488141] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.488862] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.489470] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.490022] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.509000] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.521341] rk3328-dmc-freq dmc: current ATF version 0x101 [ 0.525994] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.526703] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.529411] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:08 UTC (1453366208) [ 0.531553] random: fast init done [ 0.532280] Waiting for root device PARTUUID=5452574f-02... [ 0.566553] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 0.567654] mmc0: new high speed SDHC card at address 0002 [ 0.569750] mmcblk0: mmc0:0002 N/A 7.44 GiB [ 0.572585] mmcblk0: p1 p2 [ 0.595489] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 0.599714] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 0.600569] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 0.602303] Freeing unused kernel memory: 1728K [ 0.612630] Run /sbin/init as init process [ 0.648674] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 0.725622] init: Console is alive [ 1.620225] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 1.686796] Key type encrypted registered [ 1.696576] raid6: using algorithm neonx8 gen() 0 MB/s [ 1.697050] raid6: .... xor() 0 MB/s, rmw enabled [ 1.697474] raid6: using neon recovery algorithm [ 1.707683] xor: measuring software checksum speed [ 1.744422] 8regs : 1610.000 MB/sec [ 1.784411] 32regs : 2901.000 MB/sec [ 1.824435] arm64_neon: 3205.000 MB/sec [ 1.824811] xor: using function: arm64_neon (3205.000 MB/sec) [ 1.974931] Btrfs loaded, crc32c=crc32c-generic [ 1.985697] usbcore: registered new interface driver uas [ 1.986542] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 1.987808] init: - preinit - [ 2.199907] random: jshn: uninitialized urandom read (4 bytes read) [ 2.221783] random: jshn: uninitialized urandom read (4 bytes read) [ 2.277205] random: jshn: uninitialized urandom read (4 bytes read) [ 6.413894] mount_root: mounting /dev/root [ 6.418875] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.419661] mount_root: loading kmods from internal overlay [ 6.441715] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 6.443466] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 6.633274] block: attempting to load /etc/config/fstab [ 6.642023] block: extroot: not configured [ 6.694852] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 6.700312] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) [ 7.542959] urandom-seed: Seeding with /etc/urandom.seed [ 7.774203] procd: - early - [ 7.862601] urandom_read: 3 callbacks suppressed [ 7.862610] random: jshn: uninitialized urandom read (4 bytes read) [ 7.932234] random: jshn: uninitialized urandom read (4 bytes read) [ 7.996709] random: jshn: uninitialized urandom read (4 bytes read) [ 8.320727] procd: - ubus - [ 8.373141] procd: - init - [ 8.510996] urngd: v1.0.2 started. [ 8.531098] random: crng init done [ 8.531432] random: 1 urandom warning(s) missed due to ratelimiting [ 8.565918] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 8.630736] kmodloader: loading kernel modules from /etc/modules.d/ [ 9.397209] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: [ 9.486638] zram: Added device: zram0 [ 9.506105] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 9.540869] RPC: Registered named UNIX socket transport module. [ 9.541409] RPC: Registered udp transport module. [ 9.541822] RPC: Registered tcp transport module. [ 9.542234] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.560334] tun: Universal TUN/TAP device driver, 1.6 [ 9.588483] l2tp_core: L2TP core driver, V2.0 [ 9.591199] l2tp_netlink: L2TP netlink interface [ 9.595265] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 9.626516] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.715830] GACT probability on [ 9.717974] Mirror/redirect action on [ 9.730691] u32 classifier [ 9.730949] input device check on [ 9.731270] Actions configured [ 9.797119] Bridge firewalling registered [ 9.799321] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff [ 9.800002] Backport generated by backports.git v5.10.42-1-0-gbee5c545 [ 9.893949] ntfs3: Index binary search [ 9.894321] ntfs3: Hot fix free clusters [ 9.894676] ntfs3: Max link count 1024 [ 9.895007] ntfs3: Activated 32 bits per cluster [ 9.902088] usbcore: registered new interface driver r8152 [ 9.918684] usbcore: registered new interface driver ums-alauda [ 9.920351] usbcore: registered new interface driver ums-cypress [ 9.922086] usbcore: registered new interface driver ums-datafab [ 9.923743] usbcore: registered new interface driver ums-freecom [ 9.925426] usbcore: registered new interface driver ums-isd200 [ 9.927110] usbcore: registered new interface driver ums-jumpshot [ 9.928731] usbcore: registered new interface driver ums-karma [ 9.930933] usbcore: registered new interface driver ums-sddr09 [ 9.932762] usbcore: registered new interface driver ums-sddr55 [ 9.934700] usbcore: registered new interface driver ums-usbat [ 9.936988] usbcore: registered new interface driver usblp [ 9.946055] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 1 [ 9.987639] xt_time: kernel timezone is -0000 [ 10.074485] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 10.110647] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 10.111468] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Random ether addr 9a:6e:f0:c8:d0:66 [ 10.145675] r8152 4-1:1.0 eth1: v1.10.11 [ 10.154136] usbcore: registered new interface driver mt76x2u [ 10.158620] PPP generic driver version 2.4.2 [ 10.160335] PPP MPPE Compression module registered [ 10.162830] NET: Registered protocol family 24 [ 10.473881] usbcore: registered new interface driver rtl88XXau [ 10.892916] RTW: module init start [ 10.893239] RTW: rtl8821cu v5.4.1_28754.20180921_COEX20180712-3232 [ 10.893780] RTW: build time: Sep 2 2021 20:13:17 [ 10.894192] RTW: rtl8821cu BT-Coex version = COEX20180712-3232 [ 10.894934] usbcore: registered new interface driver rtl8821cu [ 10.895450] RTW: module init ret=0 [ 11.425726] RTW: module init start [ 11.426052] RTW: rtl88x2bu v5.6.1_30362.20181109_COEX20180928-6a6a [ 11.426592] RTW: build time: Sep 2 2021 20:13:17 [ 11.427005] RTW: rtl88x2bu BT-Coex version = COEX20180928-6a6a [ 11.427736] usbcore: registered new interface driver rtl88x2bu [ 11.428250] RTW: module init ret=0 [ 11.469013] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.474213] usbcore: registered new interface driver mt76x0u [ 11.486829] usbcore: registered new interface driver ath9k_htc [ 11.487869] kmodloader: done loading kernel modules from /etc/modules.d/ [ 14.225780] xt_FULLCONENAT: RFC3489 Full Cone NAT module [ 14.225780] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang tech@chionlab.moe [ 18.095221] br-lan: port 1(eth1) entered blocking state [ 18.095705] br-lan: port 1(eth1) entered disabled state [ 18.096711] device eth1 entered promiscuous mode [ 18.099426] br-lan: port 1(eth1) entered blocking state [ 18.099909] br-lan: port 1(eth1) entered forwarding state [ 18.166110] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] [ 18.176493] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found [ 18.177196] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW [ 18.177945] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode [ 19.101260] br-lan: port 1(eth1) entered disabled state [ 19.947824] r8152 4-1:1.0 eth1: Promiscuous mode enabled [ 19.949276] r8152 4-1:1.0 eth1: carrier on [ 19.950358] br-lan: port 1(eth1) entered blocking state [ 19.950844] br-lan: port 1(eth1) entered forwarding state [ 19.951813] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 25.341426] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 25.342247] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1184.989667] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1185.149342] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1185.150532] scsi host0: usb-storage 1-1:1.0 [ 1186.214760] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4 [ 1186.216916] sd 0:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) [ 1186.218318] sd 0:0:0:0: [sda] Write Protect is off [ 1186.218750] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 1186.219513] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1186.242325] sda: sda1 [ 1186.245802] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 1186.518901] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8608.143595] usb 1-1: USB disconnect, device number 2

[ 1186.216916] sd 0:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) [ 1186.218318] sd 0:0:0:0: [sda] Write Protect is off [ 1186.218750] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 1186.219513] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1186.242325] sda: sda1 [ 1186.245802] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 1186.518901] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

这不是识别了吗

[ 1186.216916] sd 0:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) [ 1186.218318] sd 0:0:0:0: [sda] Write Protect is off [ 1186.218750] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 1186.219513] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1186.242325] sda: sda1 [ 1186.245802] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 1186.518901] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

这不是识别了吗

那个是之前的16gU盘信息

[ 1186.216916] sd 0:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) [ 1186.218318] sd 0:0:0:0: [sda] Write Protect is off [ 1186.218750] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 1186.219513] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1186.242325] sda: sda1 [ 1186.245802] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 1186.518901] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

这不是识别了吗

root@ImmortalWrt:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.4.143 (runner@fv-az116-991) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r20038-2385ffcedb)) #0 SMP PREEMPT Thu Sep 2 20:13:17 2021 [ 0.000000] Machine model: FriendlyElec NanoPi R2S [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] cma: Reserved 8 MiB at 0x000000003f800000 [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] DMA32 zone: 4088 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 21 pages/cpu s48152 r8192 d29672 u86016 [ 0.000000] pcpu-alloc: s48152 r8192 d29672 u86016 alloc=214096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544 [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1003796K/1046528K available (8190K kernel code, 572K rwdata, 2628K rodata, 1728K init, 739K bss, 34540K reserved, 8192K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x29c/0x3a0 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001636] Console: colour dummy device 80x25 [ 0.002104] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003037] pid_max: default: 32768 minimum: 301 [ 0.003721] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.004400] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.007416] ASID allocator initialised with 32768 entries [ 0.008054] rcu: Hierarchical SRCU implementation. [ 0.009784] smp: Bringing up secondary CPUs ... [ 0.010947] Detected VIPT I-cache on CPU1 [ 0.011033] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.011805] Detected VIPT I-cache on CPU2 [ 0.011869] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.012613] Detected VIPT I-cache on CPU3 [ 0.012672] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.012799] smp: Brought up 1 node, 4 CPUs [ 0.016115] SMP: Total of 4 processors activated. [ 0.016550] CPU features: detected: 32-bit EL0 Support [ 0.017019] CPU features: detected: CRC32 instructions [ 0.025507] CPU: All CPU(s) started at EL2 [ 0.025973] alternatives: patching kernel code [ 0.042623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.043530] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.044764] pinctrl core: initialized pinctrl subsystem [ 0.046466] NET: Registered protocol family 16 [ 0.049305] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.051093] cpuidle: using governor menu [ 0.051728] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.052596] Serial: AMBA PL011 UART driver [ 0.083222] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.083845] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.084450] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085060] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.090288] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.091004] reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 [ 0.093414] iommu: Default domain type: Translated [ 0.095105] SCSI subsystem initialized [ 0.095762] usbcore: registered new interface driver usbfs [ 0.096357] usbcore: registered new interface driver hub [ 0.096894] usbcore: registered new device driver usb [ 0.098361] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.100375] clocksource: Switched to clocksource arch_sys_counter [ 0.101314] VFS: Disk quotas dquot_6.6.0 [ 0.101754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.108301] thermal_sys: Registered thermal governor 'step_wise' [ 0.108308] thermal_sys: Registered thermal governor 'power_allocator' [ 0.109561] NET: Registered protocol family 2 [ 0.110781] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.112785] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.113590] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.114398] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.115237] TCP: Hash tables configured (established 8192 bind 8192) [ 0.115995] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.116675] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.117594] NET: Registered protocol family 1 [ 0.118033] PCI: CLS 0 bytes, default 64 [ 0.119524] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.122222] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.133438] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.133984] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.164411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.165268] io scheduler mq-deadline registered [ 0.172819] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.173443] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.177105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.179581] printk: console [ttyS2] disabled [ 0.180123] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A [ 0.181063] printk: console [ttyS2] enabled [ 0.181816] printk: bootconsole [uart8250] disabled [ 0.185313] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe] ERROR* No available vop found for display-subsystem. [ 0.186911] lima ff300000.gpu: IRQ pmu not found [ 0.187553] lima ff300000.gpu: IRQ ppmmu2 not found [ 0.187997] lima ff300000.gpu: IRQ ppmmu3 not found [ 0.188483] lima ff300000.gpu: IRQ ppmmu4 not found [ 0.188927] lima ff300000.gpu: IRQ ppmmu5 not found [ 0.189369] lima ff300000.gpu: IRQ ppmmu6 not found [ 0.189806] lima ff300000.gpu: IRQ ppmmu7 not found [ 0.190266] lima ff300000.gpu: gp - mali450 version major 0 minor 0 [ 0.190882] lima ff300000.gpu: pp0 - mali450 version major 0 minor 0 [ 0.191509] lima ff300000.gpu: pp1 - mali450 version major 0 minor 0 [ 0.192116] lima ff300000.gpu: IRQ pp2 not found [ 0.192551] lima ff300000.gpu: IRQ pp3 not found [ 0.192969] lima ff300000.gpu: IRQ pp4 not found [ 0.193381] lima ff300000.gpu: IRQ pp5 not found [ 0.193802] lima ff300000.gpu: IRQ pp6 not found [ 0.194217] lima ff300000.gpu: IRQ pp7 not found [ 0.194639] lima ff300000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 0.195371] lima ff300000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 0.196861] lima ff300000.gpu: bus rate = 163840000 [ 0.197306] lima ff300000.gpu: mod rate = 163840000 [ 0.198045] [drm] Initialized lima 1.0.0 20190217 for ff300000.gpu on minor 0 [ 0.207692] loop: module loaded [ 0.207993] mtip32xx Version 1.3.1 [ 0.211029] libphy: Fixed MDIO Bus: probed [ 0.213066] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.213667] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.214402] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.214976] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing [ 0.217558] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2 [ 0.218675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.219256] ehci-pci: EHCI PCI platform driver [ 0.219716] ehci-platform: EHCI generic platform driver [ 0.222641] ehci-platform ff5c0000.usb: EHCI Host Controller [ 0.223175] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1 [ 0.224035] ehci-platform ff5c0000.usb: irq 29, io mem 0xff5c0000 [ 0.240393] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.241672] hub 1-0:1.0: USB hub found [ 0.242048] hub 1-0:1.0: 1 port detected [ 0.242996] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.243586] ohci-platform: OHCI generic platform driver [ 0.244493] ohci-platform ff5d0000.usb: Generic Platform OHCI controller [ 0.245115] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2 [ 0.246004] ohci-platform ff5d0000.usb: irq 30, io mem 0xff5d0000 [ 0.309127] hub 2-0:1.0: USB hub found [ 0.309511] hub 2-0:1.0: 1 port detected [ 0.311114] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.311631] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3 [ 0.312558] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 0.313463] xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0xff600000 [ 0.314978] hub 3-0:1.0: USB hub found [ 0.315354] hub 3-0:1.0: 1 port detected [ 0.316133] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.316710] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4 [ 0.317413] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.318086] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.319470] hub 4-0:1.0: USB hub found [ 0.319860] hub 4-0:1.0: 1 port detected [ 0.320939] usbcore: registered new interface driver usb-storage [ 0.321678] i2c /dev entries driver [ 0.324756] rk808 1-0018: chip id: 0x8050 [ 0.332829] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 0.333416] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 0.335805] vdd_log: supplied by vdd_5v [ 0.338333] vdd_arm: supplied by vdd_5v [ 0.338985] vcc_ddr: supplied by vdd_5v [ 0.340586] vcc_io_33: supplied by vdd_5v [ 0.342990] vcc_18: supplied by vcc_io_33 [ 0.347188] vcc18_emmc: supplied by vcc_io_33 [ 0.351465] vdd_10: supplied by vdd_5v [ 0.362748] rk808-rtc rk808-rtc: registered as rtc0 [ 0.370029] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0 [ 0.370943] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 8 >= em_cap_state7 [ 0.374026] sdhci: Secure Digital Host Controller Interface driver [ 0.374579] sdhci: Copyright(c) Pierre Ossman [ 0.374961] Synopsys Designware Multimedia Card Interface Driver [ 0.376011] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.376687] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.377286] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.377844] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.379050] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.380522] ledtrig-cpu: registered to indicate activity on CPUs [ 0.381331] usbcore: registered new interface driver usbhid [ 0.381821] usbhid: USB HID core driver [ 0.383540] NET: Registered protocol family 10 [ 0.384950] Segment Routing with IPv6 [ 0.385338] NET: Registered protocol family 17 [ 0.385770] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.386898] 8021q: 802.1Q VLAN Support v1.8 [ 0.401394] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.402056] vcc_sd: supplied by vcc_io_33 [ 0.403195] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.403780] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.404583] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.405244] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input). [ 0.405870] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24). [ 0.406375] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18). [ 0.406892] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no). [ 0.407499] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed [ 0.408111] rk_gmac-dwmac ff540000.ethernet: clock input from PHY [ 0.413706] rk_gmac-dwmac ff540000.ethernet: init for RGMII [ 0.414560] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 0.415198] rk_gmac-dwmac ff540000.ethernet: DWMAC1000 [ 0.415660] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported [ 0.416315] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported [ 0.417001] rk_gmac-dwmac ff540000.ethernet: COE Type 2 [ 0.417458] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported [ 0.418072] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported [ 0.418636] rk_gmac-dwmac ff540000.ethernet: Normal descriptors [ 0.419155] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled [ 0.419667] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.420562] libphy: stmmac: probed [ 0.489966] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.490635] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.491238] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.491788] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.510745] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.525098] rk3328-dmc-freq dmc: current ATF version 0x101 [ 0.529974] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.530685] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.533243] rk808-rtc rk808-rtc: setting system clock to 2021-09-06T04:22:00 UTC (1630902120) [ 0.535342] Waiting for root device PARTUUID=5452574f-02... [ 0.540923] random: fast init done [ 0.569195] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 0.570224] mmc0: new high speed SDHC card at address 0002 [ 0.572058] mmcblk0: mmc0:0002 N/A 7.44 GiB [ 0.575395] mmcblk0: p1 p2 [ 0.598921] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 0.603136] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 0.603882] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 0.605654] Freeing unused kernel memory: 1728K [ 0.620516] Run /sbin/init as init process [ 0.652574] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 0.732752] init: Console is alive [ 1.630655] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 1.703347] Key type encrypted registered [ 1.713226] raid6: using algorithm neonx8 gen() 0 MB/s [ 1.713691] raid6: .... xor() 0 MB/s, rmw enabled [ 1.714104] raid6: using neon recovery algorithm [ 1.724099] xor: measuring software checksum speed [ 1.764544] 8regs : 805.000 MB/sec [ 1.804571] 32regs : 923.000 MB/sec [ 1.844521] arm64_neon: 1649.000 MB/sec [ 1.844903] xor: using function: arm64_neon (1649.000 MB/sec) [ 2.002128] Btrfs loaded, crc32c=crc32c-generic [ 2.013305] usbcore: registered new interface driver uas [ 2.014226] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 2.019135] init: - preinit - [ 2.237522] random: jshn: uninitialized urandom read (4 bytes read) [ 2.257209] random: jshn: uninitialized urandom read (4 bytes read) [ 2.309836] random: jshn: uninitialized urandom read (4 bytes read) [ 6.441289] mount_root: mounting /dev/root [ 7.248564] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 7.249496] mount_root: loading kmods from internal overlay [ 7.271772] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 7.273770] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 7.476686] block: attempting to load /etc/config/fstab [ 7.484197] block: extroot: not configured [ 7.534868] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 8.377504] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) [ 9.190250] urandom-seed: Seeding with /etc/urandom.seed [ 9.422332] procd: - early - [ 9.512597] urandom_read: 3 callbacks suppressed [ 9.512606] random: jshn: uninitialized urandom read (4 bytes read) [ 9.592583] random: jshn: uninitialized urandom read (4 bytes read) [ 9.659543] random: jshn: uninitialized urandom read (4 bytes read) [ 9.968602] procd: - ubus - [ 10.020974] procd: - init - [ 10.156143] urngd: v1.0.2 started. [ 10.176474] random: crng init done [ 10.176810] random: 1 urandom warning(s) missed due to ratelimiting [ 10.242188] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 10.300009] kmodloader: loading kernel modules from /etc/modules.d/ [ 11.078413] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: [ 11.149061] zram: Added device: zram0 [ 11.165358] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 11.197865] RPC: Registered named UNIX socket transport module. [ 11.198399] RPC: Registered udp transport module. [ 11.198812] RPC: Registered tcp transport module. [ 11.199226] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.215454] tun: Universal TUN/TAP device driver, 1.6 [ 11.241590] l2tp_core: L2TP core driver, V2.0 [ 11.243965] l2tp_netlink: L2TP netlink interface [ 11.247939] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 11.277695] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.353598] GACT probability on [ 11.355314] Mirror/redirect action on [ 11.368275] u32 classifier [ 11.368597] input device check on [ 11.368941] Actions configured [ 11.434104] Bridge firewalling registered [ 11.436080] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff [ 11.436826] Backport generated by backports.git v5.10.42-1-0-gbee5c545 [ 11.529619] ntfs3: Index binary search [ 11.529969] ntfs3: Hot fix free clusters [ 11.530320] ntfs3: Max link count 1024 [ 11.530650] ntfs3: Activated 32 bits per cluster [ 11.538335] usbcore: registered new interface driver r8152 [ 11.556760] usbcore: registered new interface driver ums-alauda [ 11.558424] usbcore: registered new interface driver ums-cypress [ 11.560091] usbcore: registered new interface driver ums-datafab [ 11.561880] usbcore: registered new interface driver ums-freecom [ 11.563596] usbcore: registered new interface driver ums-isd200 [ 11.565334] usbcore: registered new interface driver ums-jumpshot [ 11.567296] usbcore: registered new interface driver ums-karma [ 11.569213] usbcore: registered new interface driver ums-sddr09 [ 11.571013] usbcore: registered new interface driver ums-sddr55 [ 11.572945] usbcore: registered new interface driver ums-usbat [ 11.574935] usbcore: registered new interface driver usblp [ 11.583730] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 1 [ 11.623694] xt_time: kernel timezone is -0000 [ 11.710415] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 11.745242] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 11.746063] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Random ether addr ae:d7:50:fa:ac:da [ 11.777803] r8152 4-1:1.0 eth1: v1.10.11 [ 11.789380] usbcore: registered new interface driver mt76x2u [ 11.794059] PPP generic driver version 2.4.2 [ 11.795777] PPP MPPE Compression module registered [ 11.798363] NET: Registered protocol family 24 [ 12.110349] usbcore: registered new interface driver rtl88XXau [ 12.528468] RTW: module init start [ 12.528790] RTW: rtl8821cu v5.4.1_28754.20180921_COEX20180712-3232 [ 12.529331] RTW: build time: Sep 2 2021 20:13:17 [ 12.529743] RTW: rtl8821cu BT-Coex version = COEX20180712-3232 [ 12.530469] usbcore: registered new interface driver rtl8821cu [ 12.530984] RTW: module init ret=0 [ 13.065337] RTW: module init start [ 13.065664] RTW: rtl88x2bu v5.6.1_30362.20181109_COEX20180928-6a6a [ 13.066204] RTW: build time: Sep 2 2021 20:13:17 [ 13.066616] RTW: rtl88x2bu BT-Coex version = COEX20180928-6a6a [ 13.067356] usbcore: registered new interface driver rtl88x2bu [ 13.067872] RTW: module init ret=0 [ 13.110380] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 13.115625] usbcore: registered new interface driver mt76x0u [ 13.128320] usbcore: registered new interface driver ath9k_htc [ 13.129378] kmodloader: done loading kernel modules from /etc/modules.d/ [ 15.866221] xt_FULLCONENAT: RFC3489 Full Cone NAT module [ 15.866221] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang tech@chionlab.moe [ 18.562509] br-lan: port 1(eth1) entered blocking state [ 18.563181] br-lan: port 1(eth1) entered disabled state [ 18.564057] device eth1 entered promiscuous mode [ 18.567074] br-lan: port 1(eth1) entered blocking state [ 18.567564] br-lan: port 1(eth1) entered forwarding state [ 18.634097] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] [ 18.648502] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found [ 18.649206] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW [ 18.649817] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode [ 19.580775] br-lan: port 1(eth1) entered disabled state [ 20.223762] r8152 4-1:1.0 eth1: Promiscuous mode enabled [ 20.224714] r8152 4-1:1.0 eth1: carrier on [ 20.225910] br-lan: port 1(eth1) entered blocking state [ 20.226410] br-lan: port 1(eth1) entered forwarding state [ 20.227373] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 25.821478] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 25.822361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

这个是插上移动硬盘的r2s，拔下再插上的信息

[ 1186.216916] sd 0:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) [ 1186.218318] sd 0:0:0:0: [sda] Write Protect is off [ 1186.218750] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 1186.219513] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1186.242325] sda: sda1 [ 1186.245802] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 1186.518901] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. 这不是识别了吗

root@ImmortalWrt:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.4.143 (runner@fv-az116-991) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r20038-2385ffcedb)) #0 SMP PREEMPT Thu Sep 2 20:13:17 2021 [ 0.000000] Machine model: FriendlyElec NanoPi R2S [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] cma: Reserved 8 MiB at 0x000000003f800000 [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] DMA32 zone: 4088 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 21 pages/cpu s48152 r8192 d29672 u86016 [ 0.000000] pcpu-alloc: s48152 r8192 d29672 u86016 alloc=21_4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544 [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1003796K/1046528K available (8190K kernel code, 572K rwdata, 2628K rodata, 1728K init, 739K bss, 34540K reserved, 8192K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x29c/0x3a0 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001636] Console: colour dummy device 80x25 [ 0.002104] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003037] pid_max: default: 32768 minimum: 301 [ 0.003721] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.004400] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.007416] ASID allocator initialised with 32768 entries [ 0.008054] rcu: Hierarchical SRCU implementation. [ 0.009784] smp: Bringing up secondary CPUs ... [ 0.010947] Detected VIPT I-cache on CPU1 [ 0.011033] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.011805] Detected VIPT I-cache on CPU2 [ 0.011869] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.012613] Detected VIPT I-cache on CPU3 [ 0.012672] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.012799] smp: Brought up 1 node, 4 CPUs [ 0.016115] SMP: Total of 4 processors activated. [ 0.016550] CPU features: detected: 32-bit EL0 Support [ 0.017019] CPU features: detected: CRC32 instructions [ 0.025507] CPU: All CPU(s) started at EL2 [ 0.025973] alternatives: patching kernel code [ 0.042623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.043530] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.044764] pinctrl core: initialized pinctrl subsystem [ 0.046466] NET: Registered protocol family 16 [ 0.049305] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.051093] cpuidle: using governor menu [ 0.051728] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.052596] Serial: AMBA PL011 UART driver [ 0.083222] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.083845] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.084450] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085060] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.090288] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.091004] reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 [ 0.093414] iommu: Default domain type: Translated [ 0.095105] SCSI subsystem initialized [ 0.095762] usbcore: registered new interface driver usbfs [ 0.096357] usbcore: registered new interface driver hub [ 0.096894] usbcore: registered new device driver usb [ 0.098361] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.100375] clocksource: Switched to clocksource arch_sys_counter [ 0.101314] VFS: Disk quotas dquot_6.6.0 [ 0.101754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.108301] thermal_sys: Registered thermal governor 'step_wise' [ 0.108308] thermal_sys: Registered thermal governor 'power_allocator' [ 0.109561] NET: Registered protocol family 2 [ 0.110781] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.112785] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.113590] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.114398] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.115237] TCP: Hash tables configured (established 8192 bind 8192) [ 0.115995] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.116675] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.117594] NET: Registered protocol family 1 [ 0.118033] PCI: CLS 0 bytes, default 64 [ 0.119524] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.122222] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.133438] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.133984] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.164411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.165268] io scheduler mq-deadline registered [ 0.172819] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.173443] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.177105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.179581] printk: console [ttyS2] disabled [ 0.180123] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A [ 0.181063] printk: console [ttyS2] enabled [ 0.181816] printk: bootconsole [uart8250] disabled [ 0.185313] rockchip-drm display-subsystem: [drm:rockchip_drm_platform_probe] ERROR No available vop found for display-subsystem. [ 0.186911] lima ff300000.gpu: IRQ pmu not found [ 0.187553] lima ff300000.gpu: IRQ ppmmu2 not found [ 0.187997] lima ff300000.gpu: IRQ ppmmu3 not found [ 0.188483] lima ff300000.gpu: IRQ ppmmu4 not found [ 0.188927] lima ff300000.gpu: IRQ ppmmu5 not found [ 0.189369] lima ff300000.gpu: IRQ ppmmu6 not found [ 0.189806] lima ff300000.gpu: IRQ ppmmu7 not found [ 0.190266] lima ff300000.gpu: gp - mali450 version major 0 minor 0 [ 0.190882] lima ff300000.gpu: pp0 - mali450 version major 0 minor 0 [ 0.191509] lima ff300000.gpu: pp1 - mali450 version major 0 minor 0 [ 0.192116] lima ff300000.gpu: IRQ pp2 not found [ 0.192551] lima ff300000.gpu: IRQ pp3 not found [ 0.192969] lima ff300000.gpu: IRQ pp4 not found [ 0.193381] lima ff300000.gpu: IRQ pp5 not found [ 0.193802] lima ff300000.gpu: IRQ pp6 not found [ 0.194217] lima ff300000.gpu: IRQ pp7 not found [ 0.194639] lima ff300000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 0.195371] lima ff300000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 0.196861] lima ff300000.gpu: bus rate = 163840000 [ 0.197306] lima ff300000.gpu: mod rate = 163840000 [ 0.198045] [drm] Initialized lima 1.0.0 20190217 for ff300000.gpu on minor 0 [ 0.207692] loop: module loaded [ 0.207993] mtip32xx Version 1.3.1 [ 0.211029] libphy: Fixed MDIO Bus: probed [ 0.213066] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.213667] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.214402] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.214976] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing [ 0.217558] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2 [ 0.218675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.219256] ehci-pci: EHCI PCI platform driver [ 0.219716] ehci-platform: EHCI generic platform driver [ 0.222641] ehci-platform ff5c0000.usb: EHCI Host Controller [ 0.223175] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1 [ 0.224035] ehci-platform ff5c0000.usb: irq 29, io mem 0xff5c0000 [ 0.240393] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.241672] hub 1-0:1.0: USB hub found [ 0.242048] hub 1-0:1.0: 1 port detected [ 0.242996] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.243586] ohci-platform: OHCI generic platform driver [ 0.244493] ohci-platform ff5d0000.usb: Generic Platform OHCI controller [ 0.245115] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2 [ 0.246004] ohci-platform ff5d0000.usb: irq 30, io mem 0xff5d0000 [ 0.309127] hub 2-0:1.0: USB hub found [ 0.309511] hub 2-0:1.0: 1 port detected [ 0.311114] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.311631] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3 [ 0.312558] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 [ 0.313463] xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0xff600000 [ 0.314978] hub 3-0:1.0: USB hub found [ 0.315354] hub 3-0:1.0: 1 port detected [ 0.316133] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.316710] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4 [ 0.317413] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.318086] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.319470] hub 4-0:1.0: USB hub found [ 0.319860] hub 4-0:1.0: 1 port detected [ 0.320939] usbcore: registered new interface driver usb-storage [ 0.321678] i2c /dev entries driver [ 0.324756] rk808 1-0018: chip id: 0x8050 [ 0.332829] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 0.333416] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 0.335805] vdd_log: supplied by vdd_5v [ 0.338333] vdd_arm: supplied by vdd_5v [ 0.338985] vcc_ddr: supplied by vdd_5v [ 0.340586] vcc_io_33: supplied by vdd_5v [ 0.342990] vcc_18: supplied by vcc_io_33 [ 0.347188] vcc18_emmc: supplied by vcc_io_33 [ 0.351465] vdd_10: supplied by vdd_5v [ 0.362748] rk808-rtc rk808-rtc: registered as rtc0 [ 0.370029] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0 [ 0.370943] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 8 >= em_cap_state7 [ 0.374026] sdhci: Secure Digital Host Controller Interface driver [ 0.374579] sdhci: Copyright(c) Pierre Ossman [ 0.374961] Synopsys Designware Multimedia Card Interface Driver [ 0.376011] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.376687] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.377286] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.377844] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.379050] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.380522] ledtrig-cpu: registered to indicate activity on CPUs [ 0.381331] usbcore: registered new interface driver usbhid [ 0.381821] usbhid: USB HID core driver [ 0.383540] NET: Registered protocol family 10 [ 0.384950] Segment Routing with IPv6 [ 0.385338] NET: Registered protocol family 17 [ 0.385770] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.386898] 8021q: 802.1Q VLAN Support v1.8 [ 0.401394] sdmmc-regulator GPIO handle specifies active low - ignored [ 0.402056] vcc_sd: supplied by vcc_io_33 [ 0.403195] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found [ 0.403780] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found [ 0.404583] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 0.405244] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input). [ 0.405870] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24). [ 0.406375] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18). [ 0.406892] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no). [ 0.407499] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed [ 0.408111] rk_gmac-dwmac ff540000.ethernet: clock input from PHY [ 0.413706] rk_gmac-dwmac ff540000.ethernet: init for RGMII [ 0.414560] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 0.415198] rk_gmac-dwmac ff540000.ethernet: DWMAC1000 [ 0.415660] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported [ 0.416315] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported [ 0.417001] rk_gmac-dwmac ff540000.ethernet: COE Type 2 [ 0.417458] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported [ 0.418072] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported [ 0.418636] rk_gmac-dwmac ff540000.ethernet: Normal descriptors [ 0.419155] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled [ 0.419667] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.420562] libphy: stmmac: probed [ 0.489966] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode. [ 0.490635] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller. [ 0.491238] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a [ 0.491788] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo [ 0.510745] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.525098] rk3328-dmc-freq dmc: current ATF version 0x101 [ 0.529974] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.530685] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! [ 0.533243] rk808-rtc rk808-rtc: setting system clock to 2021-09-06T04:22:00 UTC (1630902120) [ 0.535342] Waiting for root device PARTUUID=5452574f-02... [ 0.540923] random: fast init done [ 0.569195] mmchost mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 0.570224] mmc0: new high speed SDHC card at address 0002 [ 0.572058] mmcblk0: mmc0:0002 N/A 7.44 GiB [ 0.575395] mmcblk0: p1 p2 [ 0.598921] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 0.603136] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 0.603882] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 0.605654] Freeing unused kernel memory: 1728K [ 0.620516] Run /sbin/init as init process [ 0.652574] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 0.732752] init: Console is alive [ 1.630655] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 1.703347] Key type encrypted registered [ 1.713226] raid6: using algorithm neonx8 gen() 0 MB/s [ 1.713691] raid6: .... xor() 0 MB/s, rmw enabled [ 1.714104] raid6: using neon recovery algorithm [ 1.724099] xor: measuring software checksum speed [ 1.764544] 8regs : 805.000 MB/sec [ 1.804571] 32regs : 923.000 MB/sec [ 1.844521] arm64_neon: 1649.000 MB/sec [ 1.844903] xor: using function: arm64_neon (1649.000 MB/sec) [ 2.002128] Btrfs loaded, crc32c=crc32c-generic [ 2.013305] usbcore: registered new interface driver uas [ 2.014226] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 2.019135] init: - preinit - [ 2.237522] random: jshn: uninitialized urandom read (4 bytes read) [ 2.257209] random: jshn: uninitialized urandom read (4 bytes read) [ 2.309836] random: jshn: uninitialized urandom read (4 bytes read) [ 6.441289] mount_root: mounting /dev/root [ 7.248564] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 7.249496] mount_root: loading kmods from internal overlay [ 7.271772] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 7.273770] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 7.476686] block: attempting to load /etc/config/fstab [ 7.484197] block: extroot: not configured [ 7.534868] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 8.377504] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) [ 9.190250] urandom-seed: Seeding with /etc/urandom.seed [ 9.422332] procd: - early - [ 9.512597] urandom_read: 3 callbacks suppressed [ 9.512606] random: jshn: uninitialized urandom read (4 bytes read) [ 9.592583] random: jshn: uninitialized urandom read (4 bytes read) [ 9.659543] random: jshn: uninitialized urandom read (4 bytes read) [ 9.968602] procd: - ubus - [ 10.020974] procd: - init - [ 10.156143] urngd: v1.0.2 started. [ 10.176474] random: crng init done [ 10.176810] random: 1 urandom warning(s) missed due to ratelimiting [ 10.242188] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended [ 10.300009] kmodloader: loading kernel modules from /etc/modules.d/ [ 11.078413] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: [ 11.149061] zram: Added device: zram0 [ 11.165358] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 11.197865] RPC: Registered named UNIX socket transport module. [ 11.198399] RPC: Registered udp transport module. [ 11.198812] RPC: Registered tcp transport module. [ 11.199226] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.215454] tun: Universal TUN/TAP device driver, 1.6 [ 11.241590] l2tp_core: L2TP core driver, V2.0 [ 11.243965] l2tp_netlink: L2TP netlink interface [ 11.247939] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 11.277695] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.353598] GACT probability on [ 11.355314] Mirror/redirect action on [ 11.368275] u32 classifier [ 11.368597] input device check on [ 11.368941] Actions configured [ 11.434104] Bridge firewalling registered [ 11.436080] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff [ 11.436826] Backport generated by backports.git v5.10.42-1-0-gbee5c545 [ 11.529619] ntfs3: Index binary search [ 11.529969] ntfs3: Hot fix free clusters [ 11.530320] ntfs3: Max link count 1024 [ 11.530650] ntfs3: Activated 32 bits per cluster [ 11.538335] usbcore: registered new interface driver r8152 [ 11.556760] usbcore: registered new interface driver ums-alauda [ 11.558424] usbcore: registered new interface driver ums-cypress [ 11.560091] usbcore: registered new interface driver ums-datafab [ 11.561880] usbcore: registered new interface driver ums-freecom [ 11.563596] usbcore: registered new interface driver ums-isd200 [ 11.565334] usbcore: registered new interface driver ums-jumpshot [ 11.567296] usbcore: registered new interface driver ums-karma [ 11.569213] usbcore: registered new interface driver ums-sddr09 [ 11.571013] usbcore: registered new interface driver ums-sddr55 [ 11.572945] usbcore: registered new interface driver ums-usbat [ 11.574935] usbcore: registered new interface driver usblp [ 11.583730] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 1 [ 11.623694] xt_time: kernel timezone is -0000 [ 11.710415] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 11.745242] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 11.746063] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Random ether addr ae:d7:50:fa:ac:da [ 11.777803] r8152 4-1:1.0 eth1: v1.10.11 [ 11.789380] usbcore: registered new interface driver mt76x2u [ 11.794059] PPP generic driver version 2.4.2 [ 11.795777] PPP MPPE Compression module registered [ 11.798363] NET: Registered protocol family 24 [ 12.110349] usbcore: registered new interface driver rtl88XXau [ 12.528468] RTW: module init start [ 12.528790] RTW: rtl8821cu v5.4.1_28754.20180921_COEX20180712-3232 [ 12.529331] RTW: build time: Sep 2 2021 20:13:17 [ 12.529743] RTW: rtl8821cu BT-Coex version = COEX20180712-3232 [ 12.530469] usbcore: registered new interface driver rtl8821cu [ 12.530984] RTW: module init ret=0 [ 13.065337] RTW: module init start [ 13.065664] RTW: rtl88x2bu v5.6.1_30362.20181109_COEX20180928-6a6a [ 13.066204] RTW: build time: Sep 2 2021 20:13:17 [ 13.066616] RTW: rtl88x2bu BT-Coex version = COEX20180928-6a6a [ 13.067356] usbcore: registered new interface driver rtl88x2bu [ 13.067872] RTW: module init ret=0 [ 13.110380] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 13.115625] usbcore: registered new interface driver mt76x0u [ 13.128320] usbcore: registered new interface driver ath9k_htc [ 13.129378] kmodloader: done loading kernel modules from /etc/modules.d/* [ 15.866221] xt_FULLCONENAT: RFC3489 Full Cone NAT module [ 15.866221] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang tech@chionlab.moe [ 18.562509] br-lan: port 1(eth1) entered blocking state [ 18.563181] br-lan: port 1(eth1) entered disabled state [ 18.564057] device eth1 entered promiscuous mode [ 18.567074] br-lan: port 1(eth1) entered blocking state [ 18.567564] br-lan: port 1(eth1) entered forwarding state [ 18.634097] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] [ 18.648502] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found [ 18.649206] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW [ 18.649817] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode [ 19.580775] br-lan: port 1(eth1) entered disabled state [ 20.223762] r8152 4-1:1.0 eth1: Promiscuous mode enabled [ 20.224714] r8152 4-1:1.0 eth1: carrier on [ 20.225910] br-lan: port 1(eth1) entered blocking state [ 20.226410] br-lan: port 1(eth1) entered forwarding state [ 20.227373] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 25.821478] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 25.822361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

这个是插上移动硬盘的r2s，拔下再插上的信息

从启动到25秒都没有设备插入信息你硬盘盒要上外部电源的吧

不用一直打全文你就把设备插入 dmesg增加的那部分上下文发一下就行了 @ilove125006436

不用一直打全文你就把设备插入 dmesg增加的那部分上下文发一下就行了 @ilove125006436

很奇怪，这款是绿联的asm235cm主控的2.5寸硬盘盒，线材是typec的，并没有外部供电，插电脑或者移动送的电视机顶盒都可以正常使用和识别。

不用一直打全文你就把设备插入 dmesg增加的那部分上下文发一下就行了 @ilove125006436

移动电视机顶盒我刷了openwrt 可以正常挂载，自动挂载系统

主机名 localhost 主机型号 Generic sunxi board 固件版本 OpenWrt Chaos Calmer 15.05 /LuCI 15.05-129-gc84aea1 Release (git-15.349.82008-7ad426e)
内核版本 3.18.24_hi3798mv310 本地时间 Mon Sep 6 05:15:56 2021 运行时间 0h 4m 20s

/dev/block/vold/8:1

/android/mnt/sda/sda1

150.82 GB / 150.91 GB

0% (94.04 MB)

/dev/block/vold/8:2

/android/mnt/sda/sda2

144.87 GB / 144.96 GB

0% (93.83 MB)

不用一直打全文你就把设备插入 dmesg增加的那部分上下文发一下就行了 @ilove125006436

移动电视机顶盒我刷了openwrt 可以正常挂载，自动挂载系统

主机名 localhost 主机型号 Generic sunxi board 固件版本 OpenWrt Chaos Calmer 15.05 /LuCI 15.05-129-gc84aea1 Release (git-15.349.82008-7ad426e) 内核版本 3.18.24_hi3798mv310 本地时间 Mon Sep 6 05:15:56 2021 运行时间 0h 4m 20s

/dev/block/vold/8:1

/android/mnt/sda/sda1

150.82 GB / 150.91 GB

0% (94.04 MB)

/dev/block/vold/8:2

/android/mnt/sda/sda2

144.87 GB / 144.96 GB

0% (93.83 MB)

机顶盒接口也是usb2.0的，可以正常识别和挂载，就是r2s不行，r2s接上硬盘有读碟声音，但是不是连续转动的声音

如果你接入硬盘盒但是dmesg没有打印出新增的日志，那就是r2s的usb口供电不足，无法启动你的硬盘

挂载硬盘建议使用4A的电源哦亲，这边建议您检查下您的电源呢亲。

如果你接入硬盘盒但是dmesg没有打印出新增的日志，那就是r2s的usb口供电不足，无法启动你的硬盘

是的，这个usb口供电可以更改设置吗？我刚换了oppo 5v 4a 的电源和线给r2s供电，仍然无法识别和挂载

挂载硬盘建议使用4A的电源哦亲，这边建议您检查下您的电源呢亲。

已经换了5v 4a 的oppo电源和线给r2s供电，仍然识别不到，硬盘有读盘声，但是只是滋滋的声音，硬盘不转动。插电脑和移动电视机顶盒刷的openwrt可以识别和挂载。

不知道这个和驱动有没有关系

r2s的usb电源输出上限肯定比你机顶盒啥的要低所以你硬盘启动不起来你用4a的电源只是提高了它的储备并不能提高它的输出上限 dmesg都没有设备连接信息所以不是驱动的事情还没有到这个层面

r2s的usb电源输出上限肯定比你机顶盒啥的要低所以你硬盘启动不起来你用4a的电源只是提高了它的储备并不能提高它的输出上限 dmesg都没有设备连接信息所以不是驱动的事情还没有到这个层面

好的，谢谢，应给就是r2s u口供电不足的原因，另外一块成品的3.0usb移动硬盘可以识别和挂载

不用一直打全文你就把设备插入 dmesg增加的那部分上下文发一下就行了 @ilove125006436

移动电视机顶盒我刷了openwrt 可以正常挂载，自动挂载系统

主机名 localhost 主机型号 Generic sunxi board 固件版本 OpenWrt Chaos Calmer 15.05 /LuCI 15.05-129-gc84aea1 Release (git-15.349.82008-7ad426e) 内核版本 3.18.24_hi3798mv310 本地时间 Mon Sep 6 05:15:56 2021 运行时间 0h 4m 20s

/dev/block/vold/8:1

/android/mnt/sda/sda1

150.82 GB / 150.91 GB

0% (94.04 MB)

/dev/block/vold/8:2

/android/mnt/sda/sda2

144.87 GB / 144.96 GB

0% (93.83 MB)

老哥，海思这芯片咋刷openwrt呀，没找到教程，求助

stupidloud / nanopi-openwrt

无法挂载主控为asm235cm的移动硬盘盒 #838