Open bingmiao opened 2 years ago
隔太久的版本更新會壞掉,整張卡重刷試試
我跟你也一样,刷了很多固件都是这现象,除了刚刷完固件开机第一次能正常获取到IP,之后就再也不行了
貌似跟你还不一样,我除了第一次刷机正常,再软重启或者断电重启,大概率LAN灯不会亮,即使电脑设置固定IP也没办法访问管理页面,WAN灯也有机率不会亮,心累啊。
貌似跟你还不一样,我除了第一次刷机正常,再软重启或者断电重启,大概率LAN灯不会亮,即使电脑设置固定IP也没办法访问管理页面,WAN灯也有机率不会亮,心累啊。
之前用的是R2S-Minimal-2020-12-14-ROM 我之前也是用这个版本,一直很稳定,后来没有minimal版本,刷各种版本都有问题
我已经刷回R2S-Minimal-2020-12-14-ROM,这玩意儿稳定优先,功能多少是次要的
是次要的
这个版本我遇到一个问题,微信打开图片或者视频特别慢,你有遇到吗,我也是这个版本用了1年,最近折腾所有的ROM都有问题
我这两天刚装上还没发现微信有问题,但是我发现打开苹果的APP store非常慢,周末我折腾一下DNS,看看能不能解决。
R2S是从路由?
R2S是从路由?
光猫->交换机->R2S
是网关 ---- 回复的原邮件 @.>发送日期2021年12月19日 16:08 @.> @.**@.>主题Re: [klever1988/nanopi-openwrt] 【心态甭了】刷了12月所有的R2S的slim全都不分配ip地址 (Issue #976)
R2S是从路由?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
[
{
@.***": "http://schema.org",
@.***": "EmailMessage",
"potentialAction": {
@.***": "ViewAction",
"target": "https://github.com/klever1988/nanopi-openwrt/issues/976#issuecomment-997347394",
"url": "https://github.com/klever1988/nanopi-openwrt/issues/976#issuecomment-997347394",
"name": "View Issue"
},
"description": "View this Issue on GitHub",
"publisher": {
@.***": "Organization",
"name": "GitHub",
"url": "https://github.com"
}
}
]
光猫- R2S-交换机- AP ---- 回复的原邮件 @.>发送日期2021年12月19日 19:33 @.> @.**@.>主题Re: [klever1988/nanopi-openwrt] 【心态甭了】刷了12月所有的R2S的slim全都不分配ip地址 (Issue #976)
R2S是从路由?
光猫->交换机->R2S
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
[
{
@.***": "http://schema.org",
@.***": "EmailMessage",
"potentialAction": {
@.***": "ViewAction",
"target": "https://github.com/klever1988/nanopi-openwrt/issues/976#issuecomment-997376207",
"url": "https://github.com/klever1988/nanopi-openwrt/issues/976#issuecomment-997376207",
"name": "View Issue"
},
"description": "View this Issue on GitHub",
"publisher": {
@.***": "Organization",
"name": "GitHub",
"url": "https://github.com"
}
}
]
一般是光猫先接到软路由,再从软路由接到交换机啊
我的接发没问题,我帮好几个朋友都装过这个固件,他们都遇到微信打开图片和视频慢的问题,其他都正常,不知道是哪里出现问题了,我换别的固件,还是不如这个固件稳定 ---- 回复的原邮件 @.>发送日期2021年12月19日 22:16 @.> @.**@.>主题Re: [klever1988/nanopi-openwrt] 【心态甭了】刷了12月所有的R2S的slim全都不分配ip地址 (Issue #976)
一般是光猫先接到软路由,再从软路由接到交换机啊
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
[
{
@.***": "http://schema.org",
@.***": "EmailMessage",
"potentialAction": {
@.***": "ViewAction",
"target": "https://github.com/klever1988/nanopi-openwrt/issues/976#issuecomment-997399711",
"url": "https://github.com/klever1988/nanopi-openwrt/issues/976#issuecomment-997399711",
"name": "View Issue"
},
"description": "View this Issue on GitHub",
"publisher": {
@.***": "Organization",
"name": "GitHub",
"url": "https://github.com"
}
}
]
之前用的是R2S-Minimal-2020-12-14-ROM 用了一年了,最近想升级试试,结果悲剧了,刷完不分配IP,必须手动才能进入管理界面。 其他设备连接后也是没有IP地址,固定内网IP后一切正常。
检查了一下所有DHCP相关设置都默认且正常,就是不分配IP
各位谁有办法帮我一下,感谢了