HOW TO GET OR INSTALL r95 AND r96 OR ANY r? TO ADD TO REAVER

[GoogleCodeExporter]

A few things to consider before submitting an issue:

0. We write documentation for a reason, if you have not read it and are
having problems with Reaver these pages are required reading before
submitting an issue:
http://code.google.com/p/reaver-wps/wiki/HintsAndTips
http://code.google.com/p/reaver-wps/wiki/README
http://code.google.com/p/reaver-wps/wiki/FAQ
http://code.google.com/p/reaver-wps/wiki/SupportedWirelessDrivers
1. Reaver will only work if your card is in monitor mode.  If you do not
know what monitor mode is then you should learn more about 802.11 hacking
in linux before using Reaver.
2. Using Reaver against access points you do not own or have permission to
attack is illegal.  If you cannot answer basic questions (i.e. model
number, distance away, etc) about the device you are attacking then do not
post your issue here.  We will not help you break the law.
3. Please look through issues that have already been posted and make sure
your question has not already been asked here: http://code.google.com/p
/reaver-wps/issues/list
4. Often times we need packet captures of mon0 while Reaver is running to
troubleshoot the issue (tcpdump -i mon0 -s0 -w broken_reaver.pcap).  Issue
reports with pcap files attached will receive more serious consideration.

Answer the following questions for every issue submitted:

0. What version of Reaver are you using?  (Only defects against the latest
version will be considered.)
reaver 1.4 and also used reaver 1.3
1. What operating system are you using (Linux is the only supported OS)?
Im running Backtrack 5 R3 on Linux in Ubuntu with virtualbox
2. Is your wireless card in monitor mode (yes/no)?
YES
3. What is the signal strength of the Access Point you are trying to crack?
PWR -5 with wifi signal 100%
4. What is the manufacturer and model # of the device you are trying to
crack?
Netgear
5. What is the entire command line string you are supplying to reaver?
reaver -i mon0 -b XX:XX:XX:XX:XX:XX -c 1 -A -S -L -d 0 -w -N -r 14:30 and i did 
my play around with this codes in many ways
6. Please describe what you think the issue is.
NO IDEA might be Backtrack repositories wich i installed all of them with:
wget -q http://all.repository.backtrack-linux.org/backtrack.gpg -o- | sudo 
apt-key add - but i don't think it might be that i did an update with:apt-get 
update and all the repositories HIT. Other then that NO IDEA i also used reaver 
pro but the same thing happens it keeps repeating pins
7. Paste the output from Reaver below.

[+] Waiting for beacon from XX:XX:XX:XX:XX:XX
[+] Switching mon0 to channel 1
[+] Associated with XX:XX:XX:XX:XX:XX (ESSID: MYROUTERNAME)
[+] Trying pin 12345670
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
[+] Sending EAPOL START request
[!] WARNING: Receive timeout occurred
                               OR
[!] WARNING: Failed to associate with  XX:XX:XX:XX:XX:XX (ESSID:MYROUTERNAME )
[!] WARNING: Failed to associate with  XX:XX:XX:XX:XX:XX  (ESSID:MYROUTERNAME )
[!] WARNING: Failed to associate with  XX:XX:XX:XX:XX:XX  (ESSID:MYROUTERNAME )
                                OR
[+] Waiting for beacon from XX:XX:XX:XX:XX:XX
[+] Switching mon0 to channel 1
[+] Associated with   XX:XX:XX:XX:XX:XX (ESSID:MYROUTERNAME )
[+] Trying pin 12345670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x02), re-trying last pin
[+] Trying pin 12345670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x02), re-trying last pin
[+] Trying pin 12345670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x02), re-trying last pin
I'ts the same on the THREE outputs it keeps repeatng the same thing forever, 
and NO my wps is not locked checked with:wash -i mon0,
i also ran aireplays-ng successfully with:
aireplay-ng -0 100 -a XX:XX:XX:XX:XX:XX -c XX:XX:XX:XX:XX:XX mon0
or just simply aireplay-ng -0 0 -a XX:XX:XX:XX:XX:XX mon0
and aireplay-ng -1 0 -a XX:XX:XX:XX:XX:XX mon0
to get a WPAhandshake. I have an Alfa Awus036H 1000mw with REALTEK RTL8187 
drivers with 9dbi Antenna or 24dBi Parabolic Grid WiFi antenna if it's too 
close or too much signal i also tried it far away i did my calculation but 
NOTHING seems to work 
COULD YOU PLEASE SHOW ME STEP BY STEP HOW TO GET OR GRAB INSTALL OR ADD THIS 
r95,r96 r113 TO REAVER or any r? don't know what these are but i heard and read 
that it works when dealing with my situation CORRECT ME IF I'M MISTAKEN iv'e 
been trying to find on google youtube but jut can't seem to know how to GET 
this r? 

Original issue reported on code.google.com by MarcAnto...@gmail.com on 18 Nov 2013 at 6:52

[GoogleCodeExporter]

i've read all the pages you provided and forgot to mention before submiting the 
issue i tried all of this commands and codes
reaver -i mon0 -b  XX:XX:XX:XX:XX:XX --lock-delay=250 -vv
reaver -i mon0 -b  XX:XX:XX:XX:XX:XX --fixed -vv
reaver -i mon0 -b  XX:XX:XX:XX:XX:XX -T .5 -vv
reaver -i mon0 -b  XX:XX:XX:XX:XX:XX -t 2 -vv and
used all this codes in many ways as possible -A -S -L -d 0 -w -N -T .5 -T .5 
--fixed   --lock-delay=250 --ignore-locks
I also did spoofing the MAC on the physical card's interface successfully with 
macchanger wlan0 -A  or macchanger -m XX:XX:XX:XX:XX:XX wlan0 or on monitor 
mode mon0 and the target AP does support WPS I checked with walsh or wash -i 
mon0 and it is NOT LOCKED BUT STILL IT GAVE ME ALL OF THE THREE OUTPUTS I 
PASTED ON MY ISSUE my wireless card driver ALFA AWUS036H RTL8187 DOES SUPPORT 
reaver because i successfully cracked 5 routers WITH MY FRIENDS PERMISSION its 
only been one week ago sins i cracked a password wih reaver. I tried all this 
steps with all my neighbors routers and its all the same results 

Original comment by MarcAnto...@gmail.com on 18 Nov 2013 at 8:03

[GoogleCodeExporter]

I'TS OK I CAN WAIT FOR 1000 YEARS NO WORRIES THIS WAS VERY HELPFULL THANKS FOR 
ALL OF THE REPLIES

Original comment by MarcAnto...@gmail.com on 27 Nov 2013 at 8:39

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

STILL WAITING....

Original comment by MarcAnto...@gmail.com on 11 Dec 2013 at 8:08