NetpineFreebord

[suchanoot11]

NetpineFreebord.txt

[suchanoot11]

include

include

include

const char* ssid = "itfitm"; //Change*** const char* password = ""; //Change***

define APPID "nuttapunnakpong" //Change***

define KEY "14EstWClEpjFkRR" //Change***

define SECRET "vht3P8TY93n17NACHLviUBLUc" //Change***

define ALIAS "alias_esp8266"

WiFiClient client; int timer = 0; char str[32];

define DHTTYPE DHT22 //Define sensor type

define DHTPIN D4 // Define sensor pin

DHT dht(DHTPIN, DHTTYPE, 15); //Initialize DHT sensor int humid; int temp; MicroGear microgear(client);

void onMsghandler(char topic, uint8_t msg, unsigned int msglen) { Serial.print("Incoming message --> "); msg[msglen] = '\0'; Serial.println((char *)msg); }

void onConnected(char attribute, uint8_t msg, unsigned int msglen) { Serial.println("Connected to NETPIE..."); microgear.setAlias(ALIAS); } void setup() { dht.begin();

microgear.on(MESSAGE,onMsghandler); microgear.on(CONNECTED,onConnected); Serial.begin(115200); Serial.println("Starting...");

if (WiFi.begin(ssid, password)) { while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } } Serial.println("WiFi connected"); Serial.println("IP address: "); Serial.println(WiFi.localIP());

microgear.init(KEY,SECRET,ALIAS); microgear.connect(APPID); }

void loop() { if (microgear.connected()) { Serial.println("connected"); if (timer >= 1000) { humid = dht.readHumidity(); temp = dht.readTemperature(); sprintf(str,"%d,%d",humid,temp); Serial.println(str); Serial.println("Sending --> "); microgear.publish("/dht",str); microgear.publish("/kfc",str); /////////////////////kfc timer = 0; } else timer += 100; } else { Serial.println("connection lost, reconnect..."); if (timer >= 5000) { microgear.connect(APPID); timer = 0; } else timer += 100; } delay(1000); }