warning messages in a loop.

GoogleCodeExporter commented 9 years ago


Answer the following questions for every issue submitted:

0. What version of Reaver are you using?  (Only defects against the latest
version will be considered.)
1.4
1. What operating system are you using (Linux is the only supported OS)?
backtrack

2. Is your wireless card in monitor mode (yes/no)?
yes

3. What is the signal strength of the Access Point you are trying to crack?
98%
4. What is the manufacturer and model # of the device you are trying to
crack?
realteck aws036sh

5. What is the entire command line string you are supplying to reaver?
infiltrator

6. my problem:

see print screen:
http://data.imagup.com/12/1152362011.png

I have tested this attack on the same router that worked. here is my warning 
message loop that runs constantly. (I got to 27 lines of the warning was a 
result of the other.)
I retanté 24 hours after the attack and still the same problem.

What to do?

Original issue reported on code.google.com by jeude...@gmail.com on 23 May 2012 at 12:44

GoogleCodeExporter commented 9 years ago

there is no fixes for that kind of issue,because the router locks permanently 
the registrat,the only hope is the owner of the reaver has to workaround with 
this problem.
I have the same issue (check 314 issue).

So don't bother with that issue until they fix this.

Original comment by srdja...@gmail.com on 23 May 2012 at 8:39

GoogleCodeExporter commented 9 years ago

so basically .... it takes a reset of the router, a power failure or other 
retanté hope for an attack if I understand correctly?

Original comment by jeude...@gmail.com on 24 May 2012 at 4:14

GoogleCodeExporter commented 9 years ago

Hello guys  i saw that screen and it is easy to fix. Use this command please:
example from bssid use an other oke  !!

reaver -i mono -b 11:22:33:44:55:66 -L -c 11 -vv

please not that L = very importend locks wps  and c = you channel 
this command work 100%  if you have more problems i'll will anwer it as soon as 
possible  greatings hacker1980

Original comment by mario241...@hotmail.nl on 31 May 2012 at 5:55

GoogleCodeExporter commented 9 years ago

Here an other message from hacker1980 reaver does not support every 
pins!!!!!!!!!!
so google on the internet for rainbow tables these are easy to find from 500mb
till 2 tb!! With bigger rainbow tables more sucseed
search for rainbow tables that support pin numbers!!!!!!!!!
if you use 500 mb it is enough you can  make also your own rainbow table
just google it!
greatings and have an nice day!

Original comment by mario241...@hotmail.nl on 31 May 2012 at 6:06

suetabby / reaver-wps

warning messages in a loop. #317