Add creality K1 printer profiles

hi You have to go to https://github.com/slic3r/slic3r-profiles here, you can clone the repository, make your changes, and ask for a pull request. https://opensource.com/article/19/7/create-pull-request-github https://www.youtube.com/watch?v=8x6V5IOuXog

what to change:

open the ini file for the vendor of your printer, or create a new one if it doesn't exists. Creality exsists, so it will be simplier
add a new [printer_model:K1] (sopy-paste and modify one)
- variants: each entry refer to a printer config entry, we'll go to see it later.
- bed_model & texture: svg/pong and stl file in creality directory. Please don't add big files. 50ko is a good target.
I guess you can reuse the filament, so don't bother with them.
go to [printer:*common*] line. from here, it's the defines about printers. It uses a hierachy, to avoid redoing the configuration for each printer. common is used as the base config. you can see below, [printer:*SmallBowden*] is a template that extends the *common* one. if you go to [printer:Creality Ender-3], you cans se it's a printer that just reuse the *Creality Ender-3* template, and reuse *0.4nozzle* on top (*0.4nozzle* will overite a setting if already defined in *Creality Ender-3*)
you can see in [printer:*0.4nozzle*] template, that it defines printer_variant, and this value is persent in most variants list from printer_model's
You added your printer after another one, so go to the place where this other printer is defined, and define your new one after it.
Same thing for the print. Currently, all creality printer use the same print profiles. You can do the same. You can add your special one with some settings modified if the printer need it.
- configuration with '' on the sides are not selectable (they can't be used, only as template). But you can inherit any configuration, even ones that don't have any ''

supermerill / SuperSlicer

Add creality K1 printer profiles #4109