Closed GoogleCodeExporter closed 9 years ago
Original comment by gru...@gmail.com
on 12 Jul 2011 at 3:12
It occurs to me that maybe "all flags raised" is the normal power on condition
and that in theory therefore, this can only happen from a full power switch
cycle? If so, we can simply detect "all flags"=1 and clear them all to zero,
treating this condition as a normal power-up.
(I'll need to set up a variable regulator to test brown-out resets. Watchdog
can be tested by making the WDT reset dependant on a switch position, for debug
only of course.)
Original comment by gru...@gmail.com
on 26 Jul 2011 at 2:36
Apparently, somehow, none of these problems actually seem to exist now.
Bertrand has written code just as the manual suggests and I've tested it as
working 100%. Either the chip I was using before was faulty or I was standing
on the wrong side of sanity when I thought I witnessed what I was sure I did.
*shrug*
Original comment by gru...@gmail.com
on 8 Oct 2011 at 9:53
Original issue reported on code.google.com by
gru...@gmail.com
on 9 Jul 2011 at 1:25