warping stuck

[john5514]

Hello,

if I die anywhere warping ui comes up and gets stuck in the warping text I tried deleting it I can at least move but I can't do any attack or anything other than walking.

[insthync]

How ?

[insthync]

Video please

[john5514]

hello good day

video here https://www.veed.io/view/d74f7208-fb92-4fc8-86c1-f6f91a1d29bb?panel=share

[john5514]

Video please

i try database update but not working

[insthync]

I guess the problem occurring because it cannot connect to another map server, did you check the map-server log?

[john5514]

i looked, but something didn't catch my eye

https://we.tl/t-MPEE2Ewp55

[john5514]

it does not enter some maps, it gives server rejected error and kicks out of the game and I haven't changed anything, everything was like this while everything was working smoothly

separately, if the mysql error is new in some of the logs, I delete the config and switch it on and off to restart it

If you see them, ignore them if they are not new

[insthync]

Which map your current will be warped to ?

What is respawn map?

[insthync]

It have so many Unable to connect to any of the specified MySQL hosts error, is it able to connected to MySQL ?

[insthync]

It is still spawning Map001 server, but you did not set it to scenes in build, and it shows "Scene 'Map001' couldn't be loaded because it has not been added to the build settings or the AssetBundle has not been loaded."

[insthync]

Map002 too

[insthync]

Seems like you set wrong parameter, it should not start map-server if it is going to be launched later by map-spawner-server

[insthync]

In case you doubt how can I know that you put wrong parameters

[insthync]

So many mistakes, but start from start-servers parameters, which part of the document made you understand the run-server parameter incorrectly?

[john5514]

I set the parameter in this way before, there was no problem, this is the parameter

mainmap lobby map and respawn maps respawn on some maps, some maps do not respawn at all

and some maps do not go at all server rejected says

we use sqlite3 not mysql host

parameter "D:\MMO\Might of Empire.exe" -startMapSpawnServer -spawnExePath "D:\MMO\Might of Empire.exe" -startCentralServer -startDatabaseServer -startDatabaseManager -startMapServer -startDatabaseManager -machineAddress "185.249.xxxxx"

[john5514]

Map001

It's impossible not to have Map001 installed,

because I think it wouldn't teleport unless the main server map was loaded.

[john5514]

i think i found https://prnt.sc/5oPA9J56W-bT this correct mapspawn

this is the broken map spawn option, I said I would look here, I looked 4-5 times, I felt that something was missing, I opened the old project, these places do not work

https://prnt.sc/nyURMOA4dhfY

[john5514]

I don't understand why this place went while I didn't touch anything, but I will copy the MapSpawnNetworkManager from the old project to the new project, if it works, I will forward it.

[john5514]

even though I copied it, I still can't find the place to insert the map, but I pulled it from the working place

[insthync]

Setup config in config/serverConfig.json file.

[insthync]

Map001

It's impossible not to have Map001 installed,

because I think it wouldn't teleport unless the main server map was loaded.

Correct?, If you don't going to spawn these maps, then remove it from the list

[insthync]

If you are going to use SQLite then you might setup it incorrectly because it is obviously show that it is trying to connect to MySQL

[john5514]

Map001

It's impossible not to have Map001 installed, because I think it wouldn't teleport unless the main server map was loaded.

Correct?, If you don't going to spawn these maps, then remove it from the list

The problem is that this part does not come to me, I copied and pasted the whole mmorpg kit folder from the working one and did not come to the non-working one again, shouldn't this part be?

[insthync]

I set the parameter in this way before, there was no problem, this is the parameter

mainmap lobby map and respawn maps respawn on some maps, some maps do not respawn at all

and some maps do not go at all server rejected says

we use sqlite3 not mysql host

parameter "D:\MMO\Might of Empire.exe" -startMapSpawnServer -spawnExePath "D:\MMO\Might of Empire.exe" -startCentralServer -startDatabaseServer -startDatabaseManager -startMapServer -startDatabaseManager -machineAddress "185.249.xxxxx"

This is incorrect because it has -startMapServer

[john5514]

If you are going to use SQLite then you might setup it incorrectly because it is obviously show that it is trying to connect to MySQL

If you start with the config files not created, if you saw this message at first, it does not create the config file for sqlite3 without turning it off and on because you created it from scratch at first, this error is corrected when you turn it off and on.

I told you not to care if you see it early in the logs,

I will look if the message is new

[insthync]

Map001

It's impossible not to have Map001 installed, because I think it wouldn't teleport unless the main server map was loaded.

Correct?, If you don't going to spawn these maps, then remove it from the list

The problem is that this part does not come to me, I copied and pasted the whole mmorpg kit folder from the working one and did not come to the non-working one again, shouldn't this part be?

I don't get what you want to tell me, but it is incorrect, that is it.

But you don't have to look at it because it will use all config from config/serverConfig.json only, it won't use anything from component anymore if serverConfig.json was created.

[john5514]

Harita001

Map001'in kurulu olmaması mümkün değil çünkü ana sunucu haritası yüklenmediği sürece ışınlanmayacağını düşünüyorum.

Doğru mu?, Bu haritaları oluşturmayacaksanız listeden kaldırın

Sorun şu ki bu kısım bana gelmiyor, çalışan olandan mmorpg kit klasörünün tamamını kopyalayıp yapıştırdım ve çalışmayan tarafa yine gelmedi, bu kısım olması gerekmez mi?

Bana ne söylemek istediğini anlamadım ama bu yanlış, bu kadar.

Ancak ona bakmanıza gerek yok çünkü tüm yapılandırmayı yalnızca kullanacak , eğer oluşturulduysa config/serverConfig.jsonartık bileşenden hiçbir şey kullanmayacak .serverConfig.json

Where you add maps in the editor, I don't have this list that is in the spawing maps.

I can't add to or remove from the list, I can't add to or remove from the config, yes I know I can fix it I can fix it from within "config", but doesn't the fact that it goes here indicate that something is wrong?

https://prnt.sc/q6RZSMgTNXAp

I don't have the part inside the red circle

this is my old project, this part does not come blank in the new project

new projecet

https://prnt.sc/tn7XfHAqcxHi where? map list for add remove build

[john5514]

How will the first build pull them in without this place? into the config file

[insthync]

I still don't get what you want to tell me

[john5514]

Can you look at the pictures, I don't have the complete list in these pictures, I think this problem occurred after this went,

My paramatres were always the same, always working, always reborn, no problems.

[insthync]

Can you look at the pictures, I don't have the complete list in these pictures, I think this problem occurred after this went,

My paramatres were always the same, always working, always reborn, no problems.

No, It must not start a map-server if all map-servers will be started by map-spawn server

[insthync]

I looked at the picture, I saw it have Map001, Map002 in the list. It should not be there isn't it?

[john5514]

Resme baktım listede Map001, Map002 olduğunu gördüm. Orada olmaması gerekir değil mi?

yes, they are not in that list because this is my old project, they are not even added in the new config, since they remain in the editor, it is constantly looking for them, because they are added in the build list, but I cannot update the build list except config.

[insthync]

Show me your serverConfig.json

[john5514]

https://prnt.sc/OMUW-auW5FO8

[insthync]

Look your character's respawn map in database, try find the tool to do it via google (may find "SQLiteBrowser")

[john5514]

which table?

[john5514]

https://prnt.sc/qESH8UJ2ielf true? table

[insthync]

Yes, that table

[john5514]

https://prnt.sc/Ckr2cIQN0Rl7

[john5514]

If you say that it is relevant here, for example, when you die in the lavahill map, it throws it back to the mainmap

[insthync]

Okay, then the problem occurred in the map in the video only?

[insthync]

What is the map in the video?

[john5514]

Videodaki harita nedir?

"FarmMap001",

[insthync]

I want to see FarmMap001's map info

[john5514]

https://www.veed.io/view/38fe274e-eb33-4ac0-b9df-6093ea9efd9d?sharingWidget=true&panel=share

new video

[john5514]

FarmMap001adlı kişinin harita bilgilerini görmek istiyorum

https://prnt.sc/uk9yj8B5WUF8 https://prnt.sc/AseNigUTpz86

[insthync]

Do you intend to move player to instance?

[john5514]

can return to save point? true or false?

Oyuncuyu örneğe taşımayı düşünüyor musunuz?

there were purple portals here in the game it was throwing it to the same place again, I tried to fix it like this "I delete the places you show completely"

can return to save point could be the real problem?

[john5514]

they've always been like this. was working, now I'm trying it now, let's see if there will be a change