search

svenhb / GRBL-Plotter

A GCode sender (not only for lasers or plotters) for up to two GRBL controller. SVG, DXF, HPGL import. 6 axis DRO.
https://grbl-plotter.de/
GNU General Public License v3.0
669 stars 176 forks source link

How to move the dxf trajectory display #93

Closed lianzaozi closed 4 years ago

lianzaozi commented 4 years ago

In addition to zooming, how to move the display of dxf track? Pressing the mouse wheel like AutoCAD software can move the drawing area. Similar functions

svenhb commented 4 years ago

If you press middle mouse button on selected (yellow) path, you can move it... After move in 2D-View, apply transformation via right-click menu

lianzaozi commented 4 years ago

image No "Apply Conversion" option via right-click menu

lianzaozi commented 4 years ago

The function of pressing the middle mouse button to move the mouse to control the track display area can be compared with libreCAD software. After you draw a lot of graphics in the drawing area in the libreCAD software, and then press the middle mouse button to move the mouse, you will find that the entire drawing in the drawing area moves with your mouse. What I want to express is that. If my expression is not very clear, you can draw a dozen straight lines in the libreCAD software, and then move the mouse while holding down the middle mouse button, and you will observe the scenario I described, which is what I want The meaning expressed. At present, the plotter software is zooming in on the track display area, and there is no way to move this area while keeping the zoomed state unchanged.

svenhb commented 4 years ago

"Move selected path" will apply the offset to the GCode... Perhaps better naming needed?

lianzaozi commented 4 years ago

I hope I have accurately expressed my thoughts

svenhb commented 4 years ago

Now I got it.

svenhb commented 4 years ago

With latest release 1.3.3.0 Middle mouse button will move complete view or selected form