Open FlightControl-User opened 6 days ago
So, I hope, I have understood you right... you want to connect an SD2PET to the 8032SK. The SD2PET (future) has this 2x12 edge connector and you need an adapter to the (Centronics) connector of the 8032SK.
I have already tested it with this IEEE-488 adapter: SK IEEE port -> IEEE 488 cable (2x Centronics connector) -> adapter with riser card -> sd2pet. It works.
I think, I have both PCBs in my PCB box. Will check later today.
Regards, Sven
Hello!
Thank you for making this!
I own a PET8032SK and i need some way to interface with its GPIB port. Is is possible to order from you the PET converter based board?
How can I produce/order this? What is the process?
I need to have a GPIB IEEE-488 ribbon connector that connects to the PET 8032SK GPIB port. On the other side, I just need a MALE edge IEEE-4888 output (like on the main board already). So i can attach to it an SD2PET card ... Is it possible using the riser to have a 2nd GPIB port to extend other peripherals using GPIB?
Can you please help me?