Closed coliss86 closed 3 years ago
ok, I found my error : I'm using SK6812 MINI-E instead of SK6812 MINI :(
@coliss86 Please refer to the following. Photo PCB looks Altana.
project | switch | Kailh socket availability | led | Through-hole diode | SOD-123 |
---|---|---|---|---|---|
Nexus | MX | No | SK6812MINI | Yes | No |
Altana | MX | Yes | SK6812MINI | Yes | No |
Suxen | MX | No | YS-SK6812MINI | Yes | Yes (*) |
Container | MX | Yes | YS-SK6812MINI | Yes | Yes (*) |
Choc | KailhLowProfile | No | YS-SK6812MINI | No | Yes |
@swanmatch is YS-SK6812MINI the same as SK6812MINI-E?
@fi0 Yes!
So I should have gotten Container instead of Altana ... Dang it
https://www.reddit.com/r/olkb/comments/sytzj2/when_you_order_the_wrong_leds_but_are_too_stubborn/
Ok, for anyone that stumbles here in the future. here's my brief rant on how you still could use these LEDs if you ordered the wrong PCB.
Hi,
could you tell me if the led is in the correct position according to the following photos ?
If so, the led is facing the bottom. I don't understand why it isn't oriented to the top of the keyboard in order to glow through the switch ?
Regards