"latest beta" unable to set hvac mode after selecting preset

[rrterrorr]

off and heat/cool = working fine<

Kan service climate/set_hvac_mode niet aanroepen. 'FeatureManager' object has no attribute '_saved_target_temp_low'

climate:

• platform: dual_smart_thermostat name: Climate Remo heater: switch.verwarming cooler: switch.airco heat_cool_mode: true target_sensor: sensor.temp floor_sensor: sensor.temp max_floor_temp: 26 min_floor_temp: 10 fan: switch.fan fan_hot_tolerance: 0.5 target_temp_step: 0.5 precision: 0.1 min_temp: 9 max_temp: 32 target_temp: 20 cold_tolerance: 0.2 hot_tolerance: 0.2 initial_hvac_mode: "off" # hvac mode will reset to this value after restart away: temperature: 12 target_temp_low: 12 target_temp_high: 22.5 home: temperature: 20 target_temp_low: 19 target_temp_high: 20.5 sleep: temperature: 17 target_temp_low: 17 target_temp_high: 21 eco: temperature: 19 target_temp_low: 19 target_temp_high: 21.5

[rrterrorr]

• heat
• cool
• fan

are not working

[rrterrorr]

As you can see in the image, there is something else going on. If the temperature is close to the desired setting, the mode goes from fan to air conditioning mode. I also removed the presets and then the HVAC Select works again

[swingerman]

As you can see in the image, there is something else going on. If the temperature is close to the desired setting, the mode goes from fan to air conditioning mode. I also removed the presets and then the HVAC Select works again

I think its the fan_hot_tolerance working.

[swingerman]

Please check v0.9.6.beta-7

[rrterrorr]

hello, yes, if the temperature is a little further, it will first turn on in fan mode and then up to the desired limit and then air conditioning. only .1 / .2 degrees of desired temperature, which also turns on the air conditioning instead of a fan

so imagine I need 20°C then it goes from 20.0 to 20.2 (plus minus) there it turns on the air conditioning (I manually switch it on to see what happens when it gets warmer) then to the limit fan mode and then the air conditioning comes on. (I look at the HVAC actions there and not what is being controlled)

is there something wrong in the config?

Op vr 3 mei 2024 10:51 schreef Miklos Szanyi @.***>:

[image: image] https://private-user-images.githubusercontent.com/103316641/327458772-fb1b9a9b-79f4-411f-8cbb-d7c9b7397d98.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmF3LmdpdGh1YnVzZXJjb250ZW50LmNvbSIsImtleSI6ImtleTUiLCJleHAiOjE3MTQ3MjE0MjgsIm5iZiI6MTcxNDcyMTEyOCwicGF0aCI6Ii8xMDMzMTY2NDEvMzI3NDU4NzcyLWZiMWI5YTliLTc5ZjQtNDExZi04Y2JiLWQ3YzliNzM5N2Q5OC5wbmc_WC1BbXotQWxnb3JpdGhtPUFXUzQtSE1BQy1TSEEyNTYmWC1BbXotQ3JlZGVudGlhbD1BS0lBVkNPRFlMU0E1M1BRSzRaQSUyRjIwMjQwNTAzJTJGdXMtZWFzdC0xJTJGczMlMkZhd3M0X3JlcXVlc3QmWC1BbXotRGF0ZT0yMDI0MDUwM1QwNzI1MjhaJlgtQW16LUV4cGlyZXM9MzAwJlgtQW16LVNpZ25hdHVyZT01YjY0OTM1NmU3ZjQ2ZTJlZGUzNDRhYjc0MjNhNmVmYWI3ZWE0YTEwYTBhYjVhMzI2ZTJhZWJhMjM4ZTJkODJkJlgtQW16LVNpZ25lZEhlYWRlcnM9aG9zdCZhY3Rvcl9pZD0wJmtleV9pZD0wJnJlcG9faWQ9MCJ9.70pGFifGUpxshcEuxi5wBgyaP2dsNLeVP6Porbi6xWM As you can see in the image, there is something else going on. If the temperature is close to the desired setting, the mode goes from fan to air conditioning mode. I also removed the presets and then the HVAC Select works again

I think its the fan_hot_tolerance working.

— Reply to this email directly, view it on GitHub https://github.com/swingerman/ha-dual-smart-thermostat/issues/178#issuecomment-2092581288, or unsubscribe https://github.com/notifications/unsubscribe-auth/AYUHZIPY3F5WBR2XS5ELUKLZANFYBAVCNFSM6AAAAABHCT2GMGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOJSGU4DCMRYHA . You are receiving this because you authored the thread.Message ID: @.***>