Cannot find required package lv on fresh install

Here is my spacemacs config
;; -*- mode: emacs-lisp; lexical-binding: t -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.

(defun dotspacemacs/layers ()
  "Layer configuration:
This function should only modify configuration layer settings."
  (setq-default
   ;; Base distribution to use. This is a layer contained in the directory
   ;; `+distribution'. For now available distributions are `spacemacs-base'
   ;; or `spacemacs'. (default 'spacemacs)
   dotspacemacs-distribution 'spacemacs

   ;; Lazy installation of layers (i.e. layers are installed only when a file
   ;; with a supported type is opened). Possible values are `all', `unused'
   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
   ;; lazy install any layer that support lazy installation even the layers
   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
   ;; installation feature and you have to explicitly list a layer in the
   ;; variable `dotspacemacs-configuration-layers' to install it.
   ;; (default 'unused)
   dotspacemacs-enable-lazy-installation 'unused

   ;; If non-nil then Spacemacs will ask for confirmation before installing
   ;; a layer lazily. (default t)
   dotspacemacs-ask-for-lazy-installation t

   ;; If non-nil layers with lazy install support are lazy installed.
   ;; List of additional paths where to look for configuration layers.
   ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
   dotspacemacs-configuration-layer-path '()

   ;; List of configuration layers to load.
   dotspacemacs-configuration-layers
   '(
     ;; ----------------------------------------------------------------
     ;; Example of useful layers you may want to use right away.
     ;; Uncomment some layer names and press `SPC f e R' (Vim style) or
     ;; `M-m f e R' (Emacs style) to install them.
     ;; ----------------------------------------------------------------
     git
     helm
     multiple-cursors
     neotree

     asm
     c-c++
     emacs-lisp
     html
     kotlin
     major-modes
     markdown
     latex
     syntax-checking
     racket
     ruby
     theming
     yaml

     (auto-completion :variables
                      auto-completion-return-key-behavior 'complete
                      auto-completion-tab-key-behavior 'cycle
                      auto-completion-complete-with-key-sequence (kbd "jk")
                      auto-completion-complete-with-key-sequence-delay 0.1
                      auto-completion-private-snippets-directory nil)

     (dart :variables
           dart-analysis-server t
           dart-format-on-save t)

     (elixir :variables
             elixir-backend 'lsp elixir-ls-path "/home/aswinmohanme/.local/elixir-ls/")

     (graphviz :variables
               graphviz-dot-revert-delay 1)

     (javascript :variables
                 js2-strict-missing-semi-warning nil
                 javascript-disable-tern-port-files nil)

     (lsp :variables
          lsp-ui-doc-enable nil)

     (org :variables
          org-want-todo-bindings t
          org-projectile-file "~/Dropbox/org/todos.org"
          org-enable-org-journal-support t
          org-journal-dir "~/Dropbox/org/journal/"
          org-journal-file-format "%Y-%m-%d"
          org-journal-date-prefix "#+TITLE: "
          org-journal-date-format "%A, %B %d %Y"
          org-journal-time-prefix "* "
          org-journal-time-format "")

     (python :variables
             python-backend 'lsp
             python-lsp-server 'pyls)

     (shell :variables
            shell-default-shell 'ansi-term
            shell-default-term-shell "/usr/bin/fish"
            shell-default-height 30
            shell-default-position 'bottom)

     (spell-checking :variables
                     spell-checking-enable-by-default nil
                     enable-flyspell-auto-completion t)

     (wakatime :variables
               wakatime-api-key "")
     )

   ;; List of additional packages that will be installed without being
   ;; wrapped in a layer. If you need some configuration for these
   ;; packages, then consider creating a layer. You can also put the
   ;; configuration in `dotspacemacs/user-config'.
   ;; To use a local version of a package, use the `:location' property:
   ;; '(your-package :location "~/path/to/your-package/")
   ;; Also include the dependencies as they will not be resolved automatically.
   dotspacemacs-additional-packages '()

   ;; A list of packages that cannot be updated.
   dotspacemacs-frozen-packages '()

   ;; A list of packages that will not be installed and loaded.
   dotspacemacs-excluded-packages '(alchemist)

   ;; Defines the behaviour of Spacemacs when installing packages.
   ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
   ;; `used-only' installs only explicitly used packages and deletes any unused
   ;; packages as well as their unused dependencies. `used-but-keep-unused'
   ;; installs only the used packages but won't delete unused ones. `all'
   ;; installs *all* packages supported by Spacemacs and never uninstalls them.
   ;; (default is `used-only')
   dotspacemacs-install-packages 'used-only))

(defun dotspacemacs/init ()
  "Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
  ;; This setq-default sexp is an exhaustive list of all the supported
  ;; spacemacs settings.
  (setq-default
   ;; If non-nil then enable support for the portable dumper. You'll need
   ;; to compile Emacs 27 from source following the instructions in file
   ;; EXPERIMENTAL.org at to root of the git repository.
   ;; (default nil)
   dotspacemacs-enable-emacs-pdumper nil

   ;; File path pointing to emacs 27.1 executable compiled with support
   ;; for the portable dumper (this is currently the branch pdumper).
   ;; (default "emacs-27.0.50")
   dotspacemacs-emacs-pdumper-executable-file "emacs-27.0.50"

   ;; Name of the Spacemacs dump file. This is the file will be created by the
   ;; portable dumper in the cache directory under dumps sub-directory.
   ;; To load it when starting Emacs add the parameter `--dump-file'
   ;; when invoking Emacs 27.1 executable on the command line, for instance:
   ;;   ./emacs --dump-file=~/.emacs.d/.cache/dumps/spacemacs.pdmp
   ;; (default spacemacs.pdmp)
   dotspacemacs-emacs-dumper-dump-file "spacemacs.pdmp"

   ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
   ;; possible. Set it to nil if you have no way to use HTTPS in your
   ;; environment, otherwise it is strongly recommended to let it set to t.
   ;; This variable has no effect if Emacs is launched with the parameter
   ;; `--insecure' which forces the value of this variable to nil.
   ;; (default t)
   dotspacemacs-elpa-https t

   ;; Maximum allowed time in seconds to contact an ELPA repository.
   ;; (default 5)
   dotspacemacs-elpa-timeout 5

   ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
   ;; This is an advanced option and should not be changed unless you suspect
   ;; performance issues due to garbage collection operations.
   ;; (default '(100000000 0.1))
   dotspacemacs-gc-cons '(100000000 0.1)

   ;; If non-nil then Spacelpa repository is the primary source to install
   ;; a locked version of packages. If nil then Spacemacs will install the
   ;; latest version of packages from MELPA. (default nil)
   dotspacemacs-use-spacelpa nil

   ;; If non-nil then verify the signature for downloaded Spacelpa archives.
   ;; (default nil)
   dotspacemacs-verify-spacelpa-archives nil

   ;; If non-nil then spacemacs will check for updates at startup
   ;; when the current branch is not `develop'. Note that checking for
   ;; new versions works via git commands, thus it calls GitHub services
   ;; whenever you start Emacs. (default nil)
   dotspacemacs-check-for-update nil

   ;; If non-nil, a form that evaluates to a package directory. For example, to
   ;; use different package directories for different Emacs versions, set this
   ;; to `emacs-version'. (default 'emacs-version)
   dotspacemacs-elpa-subdirectory 'emacs-version

   ;; One of `vim', `emacs' or `hybrid'.
   ;; `hybrid' is like `vim' except that `insert state' is replaced by the
   ;; `hybrid state' with `emacs' key bindings. The value can also be a list
   ;; with `:variables' keyword (similar to layers). Check the editing styles
   ;; section of the documentation for details on available variables.
   ;; (default 'vim)
   dotspacemacs-editing-style 'vim

   ;; If non-nil output loading progress in `*Messages*' buffer. (default nil)
   dotspacemacs-verbose-loading nil

   ;; Specify the startup banner. Default value is `official', it displays
   ;; the official spacemacs logo. An integer value is the index of text
   ;; banner, `random' chooses a random text banner in `core/banners'
   ;; directory. A string value must be a path to an image format supported
   ;; by your Emacs build.
   ;; If the value is nil then no banner is displayed. (default 'official)
   dotspacemacs-startup-banner 'official

   ;; List of items to show in startup buffer or an association list of
   ;; the form `(list-type . list-size)`. If nil then it is disabled.
   ;; Possible values for list-type are:
   ;; `recents' `bookmarks' `projects' `agenda' `todos'.
   ;; List sizes may be nil, in which case
   ;; `spacemacs-buffer-startup-lists-length' takes effect.
   dotspacemacs-startup-lists '((recents . 5)
                                (projects . 7))

   ;; True if the home buffer should respond to resize events. (default t)
   dotspacemacs-startup-buffer-responsive t

   ;; Default major mode of the scratch buffer (default `text-mode')
   dotspacemacs-scratch-mode 'text-mode

   ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
   ;; (default nil)
   dotspacemacs-initial-scratch-message nil

   ;; List of themes, the first of the list is loaded when spacemacs starts.
   ;; Press `SPC T n' to cycle to the next theme in the list (works great
   ;; with 2 themes variants, one dark and one light)
   dotspacemacs-themes '(minimal
                         minimal-light
                         base16-material
                         spacemacs-dark
                         spacemacs-light)

   ;; Set the theme for the Spaceline. Supported themes are `spacemacs',
   ;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
   ;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
   ;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
   ;; refer to the DOCUMENTATION.org for more info on how to create your own
   ;; spaceline theme. Value can be a symbol or list with additional properties.
   ;; (default '(spacemacs :separator wave :separator-scale 1.5))
   dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)

   ;; If non-nil the cursor color matches the state color in GUI Emacs.
   ;; (default t)
   dotspacemacs-colorize-cursor-according-to-state t

   ;; Default font, or prioritized list of fonts. `powerline-scale' allows to
   ;; quickly tweak the mode-line size to make separators look not too crappy.
   dotspacemacs-default-font '("Iosevka Term"
                               :size 14
                               :weight medium
                               :width normal)

   ;; The leader key (default "SPC")
   dotspacemacs-leader-key "SPC"

   ;; The key used for Emacs commands `M-x' (after pressing on the leader key).
   ;; (default "SPC")
   dotspacemacs-emacs-command-key "SPC"

   ;; The key used for Vim Ex commands (default ":")
   dotspacemacs-ex-command-key ":"

   ;; The leader key accessible in `emacs state' and `insert state'
   ;; (default "M-m")
   dotspacemacs-emacs-leader-key "M-m"

   ;; Major mode leader key is a shortcut key which is the equivalent of
   ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
   dotspacemacs-major-mode-leader-key ","

   ;; Major mode leader key accessible in `emacs state' and `insert state'.
   ;; (default "C-M-m")
   dotspacemacs-major-mode-emacs-leader-key "C-M-m"

   ;; These variables control whether separate commands are bound in the GUI to
   ;; the key pairs `C-i', `TAB' and `C-m', `RET'.
   ;; Setting it to a non-nil value, allows for separate commands under `C-i'
   ;; and TAB or `C-m' and `RET'.
   ;; In the terminal, these pairs are generally indistinguishable, so this only
   ;; works in the GUI. (default nil)
   dotspacemacs-distinguish-gui-tab nil

   ;; Name of the default layout (default "Default")
   dotspacemacs-default-layout-name "Default"

   ;; If non-nil the default layout name is displayed in the mode-line.
   ;; (default nil)
   dotspacemacs-display-default-layout nil

   ;; If non-nil then the last auto saved layouts are resumed automatically upon
   ;; start. (default nil)
   dotspacemacs-auto-resume-layouts nil

   ;; If non-nil, auto-generate layout name when creating new layouts. Only has
   ;; effect when using the "jump to layout by number" commands. (default nil)
   dotspacemacs-auto-generate-layout-names nil

   ;; Size (in MB) above which spacemacs will prompt to open the large file
   ;; literally to avoid performance issues. Opening a file literally means that
   ;; no major mode or minor modes are active. (default is 1)
   dotspacemacs-large-file-size 1

   ;; Location where to auto-save files. Possible values are `original' to
   ;; auto-save the file in-place, `cache' to auto-save the file to another
   ;; file stored in the cache directory and `nil' to disable auto-saving.
   ;; (default 'cache)
   dotspacemacs-auto-save-file-location 'cache

   ;; Maximum number of rollback slots to keep in the cache. (default 5)
   dotspacemacs-max-rollback-slots 5

   ;; If non-nil, the paste transient-state is enabled. While enabled, after you
   ;; paste something, pressing `C-j' and `C-k' several times cycles through the
   ;; elements in the `kill-ring'. (default nil)
   dotspacemacs-enable-paste-transient-state nil

   ;; Which-key delay in seconds. The which-key buffer is the popup listing
   ;; the commands bound to the current keystroke sequence. (default 0.4)
   dotspacemacs-which-key-delay 0.4

   ;; Which-key frame position. Possible values are `right', `bottom' and
   ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
   ;; right; if there is insufficient space it displays it at the bottom.
   ;; (default 'bottom)
   dotspacemacs-which-key-position 'bottom

   ;; Control where `switch-to-buffer' displays the buffer. If nil,
   ;; `switch-to-buffer' displays the buffer in the current window even if
   ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
   ;; displays the buffer in a same-purpose window even if the buffer can be
   ;; displayed in the current window. (default nil)
   dotspacemacs-switch-to-buffer-prefers-purpose nil

   ;; If non-nil a progress bar is displayed when spacemacs is loading. This
   ;; may increase the boot time on some systems and emacs builds, set it to
   ;; nil to boost the loading time. (default t)
   dotspacemacs-loading-progress-bar t

   ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
   ;; (Emacs 24.4+ only)
   dotspacemacs-fullscreen-at-startup t

   ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
   ;; Use to disable fullscreen animations in OSX. (default nil)
   dotspacemacs-fullscreen-use-non-native nil

   ;; If non-nil the frame is maximized when Emacs starts up.
   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
   ;; (default nil) (Emacs 24.4+ only)
   dotspacemacs-maximized-at-startup nil

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's active or selected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-active-transparency 90

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's inactive or deselected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-inactive-transparency 90

   ;; If non-nil show the titles of transient states. (default t)
   dotspacemacs-show-transient-state-title t

   ;; If non-nil show the color guide hint for transient state keys. (default t)
   dotspacemacs-show-transient-state-color-guide t

   ;; If non-nil unicode symbols are displayed in the mode line.
   ;; If you use Emacs as a daemon and wants unicode characters only in GUI set
   ;; the value to quoted `display-graphic-p'. (default t)
   dotspacemacs-mode-line-unicode-symbols t

   ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
   ;; scrolling overrides the default behavior of Emacs which recenters point
   ;; when it reaches the top or bottom of the screen. (default t)
   dotspacemacs-smooth-scrolling t

   ;; Control line numbers activation.
   ;; If set to `t' or `relative' line numbers are turned on in all `prog-mode' and
   ;; `text-mode' derivatives. If set to `relative', line numbers are relative.
   ;; This variable can also be set to a property list for finer control:
   ;; '(:relative nil
   ;;   :disabled-for-modes dired-mode
   ;;                       doc-view-mode
   ;;                       markdown-mode
   ;;                       org-mode
   ;;                       pdf-view-mode
   ;;                       text-mode
   ;;   :size-limit-kb 1000)
   ;; (default nil)
   dotspacemacs-line-numbers 'relative

   ;; Code folding method. Possible values are `evil' and `origami'.
   ;; (default 'evil)
   dotspacemacs-folding-method 'evil

   ;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
   ;; (default nil)
   dotspacemacs-smartparens-strict-mode nil

   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
   ;; over any automatically added closing parenthesis, bracket, quote, etc…
   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
   dotspacemacs-smart-closing-parenthesis nil

   ;; Select a scope to highlight delimiters. Possible values are `any',
   ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
   ;; emphasis the current one). (default 'all)
   dotspacemacs-highlight-delimiters 'all

   ;; If non-nil, start an Emacs server if one is not already running.
   ;; (default nil)
   dotspacemacs-enable-server nil

   ;; Set the emacs server socket location.
   ;; If nil, uses whatever the Emacs default is, otherwise a directory path
   ;; like \"~/.emacs.d/server\". It has no effect if
   ;; `dotspacemacs-enable-server' is nil.
   ;; (default nil)
   dotspacemacs-server-socket-dir nil

   ;; If non-nil, advise quit functions to keep server open when quitting.
   ;; (default nil)
   dotspacemacs-persistent-server nil

   ;; List of search tool executable names. Spacemacs uses the first installed
   ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
   ;; (default '("rg" "ag" "pt" "ack" "grep"))
   dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")

   ;; Format specification for setting the frame title.
   ;; %a - the `abbreviated-file-name', or `buffer-name'
   ;; %t - `projectile-project-name'
   ;; %I - `invocation-name'
   ;; %S - `system-name'
   ;; %U - contents of $USER
   ;; %b - buffer name
   ;; %f - visited file name
   ;; %F - frame name
   ;; %s - process status
   ;; %p - percent of buffer above top of window, or Top, Bot or All
   ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
   ;; %m - mode name
   ;; %n - Narrow if appropriate
   ;; %z - mnemonics of buffer, terminal, and keyboard coding systems
   ;; %Z - like %z, but including the end-of-line format
   ;; (default "%I@%S")
   dotspacemacs-frame-title-format "%I@%S"

   ;; Format specification for setting the icon title format
   ;; (default nil - same as frame-title-format)
   dotspacemacs-icon-title-format nil

   ;; Delete whitespace while saving buffer. Possible values are `all'
   ;; to aggressively delete empty line and long sequences of whitespace,
   ;; `trailing' to delete only the whitespace at end of lines, `changed' to
   ;; delete only whitespace for changed lines or `nil' to disable cleanup.
   ;; (default nil)
   dotspacemacs-whitespace-cleanup nil

   ;; Either nil or a number of seconds. If non-nil zone out after the specified
   ;; number of seconds. (default nil)
   dotspacemacs-zone-out-when-idle nil

   ;; Run `spacemacs/prettify-org-buffer' when
   ;; visiting README.org files of Spacemacs.
   ;; (default nil)
   dotspacemacs-pretty-docs nil))

(defun dotspacemacs/user-env ()
  "Environment variables setup.
This function defines the environment variables for your Emacs session. By
default it calls `spacemacs/load-spacemacs-env' which loads the environment
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
See the header of this file for more information."
  (spacemacs/load-spacemacs-env))

(defun dotspacemacs/user-init ()
  "Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
configuration.
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."
  (setq theming-modifications
        `((minimal
           (helm-source-header :inherit bold-italic)
           (org-level-1 :height 1.0)
           (org-level-2 :height 1.0)
           (org-level-3 :height 1.0)
           (org-level-4 :height 1.0)
           (org-level-5 :height 1.0))))
  )

(defun dotspacemacs/user-load ()
  "Library to load while dumping.
This function is called only while dumping Spacemacs configuration. You can
`require' or `load' the libraries of your choice that will be included in the
dump."
  )

(defun dotspacemacs/user-config ()
  "Configuration for user code:
This function is called at the very end of Spacemacs startup, after layer
configuration.
Put your configuration code here, except for variables that should be set
before packages are loaded."
  ;; Set the projectile ascii theme
  (setq neo-theme 'ascii)

  ;; Stop highlighting current line
  (spacemacs/toggle-highlight-current-line-globally-off)

  ;; Spacemacs Line Wrap
  (add-hook 'text-mode-hook 'custom-line-wrap)
  (defun custom-line-wrap ()
    (spacemacs/toggle-visual-line-navigation-on)
    (setq-local word-wrap nil))

  ;; Term Movement
  (setq term-char-mode-point-at-process-mark nil)

  ;; Fish shell ugly characters  fix
  (add-to-list 'comint-output-filter-functions 'ansi-color-process-output)
  (ansi-color-for-comint-mode-on)

  ;; Do not lock files while editing
  (setq create-lockfiles nil)

  ;; Org Mode Configutation
  (with-eval-after-load 'org
    (setq org-directory "~/Dropbox/org")
    (add-hook 'org-mode-hook (lambda ()
                               (defadvice org-clock-in (after org-clock-in-after activate)(save-buffer))
                               (defadvice org-clock-out (after org-clock-out-after activate)(save-buffer))))
    (setq org-clock-out-when-done t)
    (setq org-todo-keywords '((sequence "TODO" "|" "DONE")))
    (setq org-agenda-files (quote("~/Dropbox/org" "~/Dropbox/org/projects" "~/Dropbox/org/learning"))))

  ;; Add elixir mode format on save
  (add-hook 'elixir-mode-hook
            (lambda () (add-hook 'before-save-hook 'elixir-format nil t)))

  )

;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
(defun dotspacemacs/emacs-custom-settings ()
  "Emacs custom settings.
This is an auto-generated function, do not modify its content directly, use
Emacs customize menu instead.
This function is called at the very end of Spacemacs initialization."
(custom-set-variables
 ;; custom-set-variables was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 '(org-agenda-files
   (quote
    ("/home/aswinmohanme/Dropbox/org/applications.org" "/home/aswinmohanme/Dropbox/org/capture.org" "/home/aswinmohanme/Dropbox/org/commitments.org" "/home/aswinmohanme/Dropbox/org/gratefully_recieved_list.org" "/home/aswinmohanme/Dropbox/org/home.org" "/home/aswinmohanme/Dropbox/org/plan_of_action.org" "/home/aswinmohanme/Dropbox/org/talks.org" "/home/aswinmohanme/Dropbox/org/todos.org" "/home/aswinmohanme/Dropbox/org/will_have_list.org" "/home/aswinmohanme/Dropbox/org/projects/10000_hours.org" "/home/aswinmohanme/Dropbox/org/projects/afterflood.org" "/home/aswinmohanme/Dropbox/org/projects/best_of_blogs.org" "/home/aswinmohanme/Dropbox/org/projects/carbon_zero.org" "/home/aswinmohanme/Dropbox/org/projects/justknowme.org" "/home/aswinmohanme/Dropbox/org/projects/kerala_rescue_app.org" "/home/aswinmohanme/Dropbox/org/projects/lessphone.org" "/home/aswinmohanme/Dropbox/org/projects/prindus.org" "/home/aswinmohanme/Dropbox/org/projects/projects.org" "/home/aswinmohanme/Dropbox/org/projects/vp_scholarship.org" "/home/aswinmohanme/Dropbox/org/learning/algorithms.org" "/home/aswinmohanme/Dropbox/org/learning/assembly.org" "/home/aswinmohanme/Dropbox/org/learning/college.org" "/home/aswinmohanme/Dropbox/org/learning/ctci.org" "/home/aswinmohanme/Dropbox/org/learning/elixir.org" "/home/aswinmohanme/Dropbox/org/learning/flutter.org" "/home/aswinmohanme/Dropbox/org/learning/generic.org" "/home/aswinmohanme/Dropbox/org/learning/interpreter.org" "/home/aswinmohanme/Dropbox/org/learning/kotlin.org" "/home/aswinmohanme/Dropbox/org/learning/learning.org" "/home/aswinmohanme/Dropbox/org/learning/programming_pearls.org" "/home/aswinmohanme/Dropbox/org/learning/rubikscubeblind.org" "/home/aswinmohanme/Dropbox/org/learning/violin.org")))
 '(package-selected-packages
   (quote
    (kotlin-mode helm-rtags google-c-style disaster company-rtags rtags company-c-headers clang-format visual-fill-column yasnippet-snippets yapfify xterm-color ws-butler writeroom-mode wolfram-mode winum which-key web-mode web-beautify wakatime-mode volatile-highlights vi-tilde-fringe vala-snippets vala-mode uuidgen use-package toc-org thrift tagedit symon string-inflection stan-mode spaceline-all-the-icons smeargle slim-mode shell-pop scss-mode scad-mode sass-mode restart-emacs rainbow-delimiters racket-mode qml-mode pyvenv pytest pyenv-mode py-isort pug-mode prettier-js popwin pkgbuild-mode pippel pipenv pip-requirements persp-mode pcre2el password-generator paradox overseer orgit org-projectile org-present org-pomodoro org-mime org-download org-bullets org-brain open-junk-file ob-elixir neotree nameless multi-term move-text mmm-mode matlab-mode markdown-toc magit-svn magit-gitflow macrostep lorem-ipsum logcat livid-mode live-py-mode link-hint kivy-mode json-navigator json-mode js2-refactor js-doc indent-guide importmagic impatient-mode hungry-delete hoon-mode hl-todo highlight-parentheses highlight-numbers highlight-indentation helm-xref helm-themes helm-swoop helm-pydoc helm-purpose helm-projectile helm-org-rifle helm-mode-manager helm-make helm-gitignore helm-git-grep helm-flx helm-descbinds helm-css-scss helm-company helm-c-yasnippet helm-ag graphviz-dot-mode google-translate golden-ratio gnuplot gitignore-templates gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link gh-md fuzzy font-lock+ flyspell-popup flyspell-correct-helm flycheck-mix flycheck-credo flx-ido fill-column-indicator fancy-battery eyebrowse expand-region evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-org evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-lion evil-indent-plus evil-iedit-state evil-goggles evil-exchange evil-escape evil-ediff evil-cleverparens evil-args evil-anzu eval-sexp-fu eshell-z eshell-prompt-extras esh-help emmet-mode elisp-slime-nav editorconfig ebuild-mode dumb-jump dotenv-mode doom-modeline diminish define-word dart-mode cython-mode counsel-projectile company-web company-tern company-statistics company-anaconda column-enforce-mode clean-aindent-mode centered-cursor-mode base16-theme auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile arduino-mode alchemist aggressive-indent ace-window ace-link ace-jump-helm-line ac-ispell))))
(custom-set-faces
 ;; custom-set-faces was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 )
)
(custom-set-variables
 ;; custom-set-variables was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 '(package-selected-packages
   (quote
    (yapfify yaml-mode xterm-color x86-lookup ws-butler winum which-key web-mode web-beautify wakatime-mode volatile-highlights vi-tilde-fringe uuidgen use-package toc-org tagedit spaceline powerline smeargle slim-mode shell-pop scss-mode sass-mode rvm ruby-tools ruby-test-mode rubocop rspec-mode robe restart-emacs rbenv rake rainbow-delimiters racket-mode faceup pyvenv pytest pyenv-mode py-isort pug-mode popwin pip-requirements persp-mode pcre2el paradox spinner orgit org-projectile org-category-capture org-present org-pomodoro evil-visual-mark-mode org-mime org-download org-bullets open-junk-file ob-elixir neotree nasm-mode multi-term move-text mmm-mode minitest markdown-toc magit-gitflow macrostep lorem-ipsum livid-mode live-py-mode linum-relative link-hint json-mode js2-refactor js-doc indent-guide hydra hy-mode hungry-delete htmlize hl-todo highlight-parentheses highlight-numbers highlight-indentation helm-themes helm-swoop helm-pydoc helm-projectile helm-mode-manager helm-make helm-gitignore helm-flx helm-descbinds helm-css-scss helm-company helm-c-yasnippet helm-ag haml-mode graphviz-dot-mode google-translate golden-ratio gnuplot gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link gh-md fuzzy flyspell-popup flyspell-correct-helm flycheck-mix flycheck-credo flx-ido fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-ediff evil-args evil-anzu eval-sexp-fu eshell-z eshell-prompt-extras esh-help emmet-mode elisp-slime-nav dumb-jump diminish define-word cython-mode company-web company-tern company-statistics company-anaconda column-enforce-mode coffee-mode clean-aindent-mode chruby bundler bind-key base16-theme auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile alert alchemist aggressive-indent adaptive-wrap ace-window ace-link ace-jump-helm-line ac-ispell))))
(custom-set-faces
 ;; custom-set-faces was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 )
syl20bnr / spacemacs

Cannot find required package lv on fresh install #13110

Description :octocat:

Reproduction guide :beetle:
