Free adjustable voltage divider?

[GoogleCodeExporter]

Can the division of free adjustable rate?
So Flytron (1:11=max. 36.3V) dividers could be used as well!

Original issue reported on code.google.com by magiis...@gmail.com on 24 Aug 2011 at 4:27

[GoogleCodeExporter]

Sorry. I don't understand what you're asking here. Perhaps the English is not 
quite right? Would you care to try again?

If you are asking about the maximum configurable input voltage for the Fr-Sky 
A1/A2 ADC ports, then "yes". The current development firmware now supports 
A1/A2 resistor divider input voltages up to 40.95V. The "MaxV" setting now 
combines the resistor ratio and calibration into a single entry, adjustable in 
0.01V increments for calibration. 

Original comment by gru...@gmail.com on 24 Aug 2011 at 10:44

[GoogleCodeExporter]

Hello!

Thanks for your response!
Indeed, the British punk! I'm using Google Translate.
Then I misunderstood, if you set 1:11 scale, all ok!
This 36.3V, the voltage dividers can be used to Flytron. Thank you for your 
great support! With Best Regard!Istvan Magifrom Hungary 

gruvin9x@googlecode.com �rta:

Original comment by magiis...@gmail.com on 25 Aug 2011 at 4:55

[GoogleCodeExporter]

I Googled "Flytron" and found the product you mentioned. 
http://www.flytron.com/sensors/97-voltage-sensor-for-frsky-telemetry.html

Yes -- that is already supported. Correct. :D

Original comment by gru...@gmail.com on 25 Aug 2011 at 5:49

• Changed state: Verified

[GoogleCodeExporter]

Thank You!!! :) Istvan

gruvin9x@googlecode.com �rta:

Original comment by magiis...@gmail.com on 25 Aug 2011 at 5:55