Closed GoogleCodeExporter closed 8 years ago
This seems rather unlikely. (It's late, I'm in bed on the MacBook and can't
test right now.) Are you sure you're not using a Fr0Sky telemetry hacked radio
with the 'std' firmware? That would cause a problem similar to this.
If you are definitely using an unmodified radio with the
gruinv9x-std-speaker.hex firmware and experiencing this problem, then please
let me know here. I can look into it tomorrow. Thanks.
If in fact you have a Fr-Sky (telemetry) modified radio (or perhaps some other
mods done also) then you need to use one of the other firmware files -- or
compile your own binary from source to match your configuration.
Original comment by gru...@gmail.com
on 17 Apr 2012 at 11:23
[deleted comment]
P. S. I have not stuck and the two resistant presented in the image below. I
have to make this work?
http://code.google.com/p/gruvin9x/wiki/FlashGuide
Sorry about my english
Original comment by pcipr...@gmail.com
on 18 Apr 2012 at 4:42
[deleted comment]
The only changes made by me in the RC are: adding a backlight and jack
reprogramming software. I have not changed any one frsky transmitter that I
have to go soon.
- I visited: code.google.com/p/gruvin9x/wiki/LatestRelease;
- I downloaded a row: the Modified (Stock) '9 X Radio Versions following:
- Select all text, copy it into a text file and then rename the hex file
gruvin9x-frsky-nospeaker.hex
gruvin9x-frsky-speaker.hex
with all two gives me the same thing: switches THR and AIL are blocked on the
value 1.
Wrong me somewhere?
Now we have: to Version:
Sun: frsky-r1547
verse: v1.2-gruvin
BLD: 38
Date: 03/02/2012
time 18:06:51
EEPROM v106
Thanks Cyprian.
Original comment by pcipr...@gmail.com
on 18 Apr 2012 at 5:16
Sorry for the delay. Been very busy ...
Hmm. Well, since you're using the UNMODIFIED radio (meaning that you've made no
changes) you need to use the gruvin9x-stock.hex file -- not any of the other
three. (Although gruvin9x-std-speaker.hex should have been OK.)
You should also right-click the gruvin9x-stock.hex file link and then "Save
link/target as..." instead of clicking it normally and doing the awkward
copy/paste thing. It's much easier. :-D (Alas, I cannot change the background
code within the Google system to fix this little problem.)
Please have another go and let us know. Thanks.
No -- you absolutely do not have to make any changes -- like those resistors --
to make the firmware work -- if you have the right firmware. (There could still
be a problem with the firmware itself. I've not had a chance to test it yet.
But please try the "stock" one first.)
Original comment by gru...@gmail.com
on 19 Apr 2012 at 4:35
I uploaded the file "gruvin9x-stock.hex" and just as with the "-std-speaker.hex
gruvin9x" works well all the menu buttons just do not have telemetry.
Now, when I will get the sender: from hobbyking "DHT FrSky 8ch DIY Telemetry
Transmitter Compatible Module" will be doing? RC and resistance to change those
to work properly or they will try to remedy the fault of the software?
Original comment by pcipr...@gmail.com
on 20 Apr 2012 at 4:29
[deleted comment]
[deleted comment]
Closing this issue as nothing heard back.
Original comment by gru...@gmail.com
on 31 May 2012 at 10:31
Original issue reported on code.google.com by
pcipr...@gmail.com
on 16 Apr 2012 at 8:23