search

syncloud / platform

Run popular services on your device with one click
https://syncloud.org
GNU General Public License v3.0
400 stars 40 forks source link

Rock64 device support #329

Closed cyberb closed 5 years ago

cyberb commented 6 years ago

Image: https://dl.armbian.com/rock64/Debian_stretch_default_desktop.7z

cyberb commented 6 years ago

Image for testing is here: http://artifact.syncloud.org/image/syncloud-rock64-18.09.img.xz

jungfred commented 5 years ago

Image for testing Link is dead. Or do i need to install the first link?

Is it planned to get this officially stable on rock64?

cyberb commented 5 years ago

It is on the download page now: https://github.com/syncloud/platform/wiki

jungfred commented 5 years ago

The image is'nt booting.. I tried it twice and flashed it with etcher

cyberb commented 5 years ago

Does this image boots for you?

https://dl.armbian.com/rock64/Debian_stretch_default_desktop.7z

jungfred commented 5 years ago

Yes, this one is booting fine. But this is without syncloud, right?

cyberb commented 5 years ago

Yes, we use it to convert to Syncloud. Do you have an hdmi output to see what Syncloud image says on the screen?

jungfred commented 5 years ago

If I try to boot up with syncloud-image I only see a blackscreen.

cyberb commented 5 years ago

Can you try this one: http://artifact.syncloud.org/image/syncloud-rock64-18.12.img.xz

Unfortunately I do not have a board to test it myself.

Also hdmi output would help if shows any error.

jungfred commented 5 years ago

With 18.12.img i'm getting bootloop:

Please see the following hdmi-output in two pictures:

Picture 1 - https://ibb.co/SPJ63cK Picture 2 - https://ibb.co/4VGvt0q

After picture 2 its rebooting and shows the same again.. and again..

cyberb commented 5 years ago

Ok, one more fix for partition uuid. Can you re-download this image: http://artifact.syncloud.org/image/syncloud-rock64-18.12.img.xz

jungfred commented 5 years ago

Now it shows this while booting: https://ibb.co/2Khvr0B

Then it changes to login screen. After I'm typing the login It shows this: https://ibb.co/NSsC7rx

(The device is not found via App or ip-address)

cyberb commented 5 years ago

Ok, can you run this command after it boots?

systemctl status snap-platform-181109762.mount
jungfred commented 5 years ago

This is the output after the command: https://ibb.co/sWRcvJH

cyberb commented 5 years ago

Could you one more time latest image from: http://artifact.syncloud.org/image/syncloud-rock64-18.12.img.xz

Also if it does not work run this:

zcat /proc/config.gz | grep SQUASHFS
jungfred commented 5 years ago

Its still not working. See the HDMI output here: https://ibb.co/BZb7mrV

After I typed again: "systemctl status snap-platform-181109762.mount" See the HDMI output here: https://ibb.co/RSLVkHV

cyberb commented 5 years ago

Finally got new base image from Armbian with my kernel flag to support squash fs with xz.

Coukd you try http://artifact.syncloud.org/image/syncloud-rock64-18.12.img.xz

cyberb commented 5 years ago

Reopen if this image is not working.