KenoB1337
commented
10 months ago [X] Successfully installed a 2.1.2 version on my S1 Pro. Started the auto calibration using ABL build. ABL starts, does 4 points fails on the 5th and gives error 203 probing failed.
S1 pro F4 chip, ABL build, 2.1.2
STOP - DO NOT PROCEED - YET
I know you are itching to get something fixed and/or you really need help with a problem you are experiencing but before you submit this report, go to the files section and download the latest version of the firmware for your machine.
If you can recreate the issue using the latest available version of the firmware, come back here and feel free to proceed with creating a bug report.
FIRST STEP
[*] put an X in the box to the left to indicate you have followed the steps mentioned above. Bug reports that do not have this box marked will be closed and locked.
Describe the bug Successfully installed a 2.1.2 version on my S1 Pro. Started the auto calibration (using UBL 100 build). (based on Proterface output) Probed 9 out of 10 points on X, 10\10 on Y. As soon as progress reached 90% it hanged. When connected through Pronterface i see that at 90% it starts waiting for user input from screen with promt (which did not apper on the screen itself, screen version 1.0.2). When i submit the M108 to break wait cycle it spew out error Unknown command M10M105 and stopped waiting for input, as well as aborted the probing. At ABL variant it finished the ABL procedure, but entered the promt waiting in manual leveling tab, with no reaction to m108
To Reproduce Steps to reproduce the behavior:
Expected behavior Finish the proccess
Screenshots If applicable, add screenshots to help explain your problem.
Machine (please complete the following information):
Variant (please complete the following information):
Marlin Version (please complete the following information):
Additional context Add any other context about the problem here.