search

synman / Octoprint-Bettergrblsupport

Better Grbl Support Plugin for Octoprint based (loosely) on the original Grbl Support plugin developed by mic159
https://github.com/synman/Octoprint-Bettergrblsupport/wiki
64 stars 19 forks source link

GRBL Settings -- No settings appear #87

Open garyzz opened 1 year ago

garyzz commented 1 year ago

No settings appear under GRBL Settings after connecting to my CNC.
Octoprint version 1.8.6. Unlike a similar reported issue "GRBL signature unknown #67", I have a Signature: [VER:1.1f.20220618:] [OPT:VMZL,35,254] but no contents are listed under id, value and description.

My terminal output after clearing the terminal buffer and performing a disconnect and reconnect are posted below

TERMINAL OUTPUT Changing monitoring state from "Offline" to "Opening serial connection" Connecting to port /dev/ttyACM0, baudrate 115200 Changing monitoring state from "Opening serial connection" to "Connecting" Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Send:

? Send:

? Recv: <Idle|MPos:2.000,-15.000,0.000|Bf:35,250|FS:0,0> Recv: ok Changing monitoring state from "Connecting" to "Operational" Send:

? Send: $$ Recv: ok Recv: ok Recv: <Idle|MPos:2.000,-15.000,0.000|Bf:35,251|FS:0,0> Recv: ok Recv: ok Recv: ok Recv: <Idle|MPos:2.000,-15.000,0.000|Bf:35,250|FS:0,0> Recv: ok Recv: ok Recv: ok Recv: $0=10 Recv: $1=25 Recv: $2=0 Recv: $3=6 Recv: $4=0 Recv: $5=0 Recv: $6=0 Recv: $10=115 Recv: $11=0.010 Recv: $12=0.002 Recv: $13=0 Recv: $20=0 Recv: $21=0 Recv: $22=1 Recv: $23=7 Recv: $24=25.000 Recv: $25=500.000 Recv: $26=250 Recv: $27=2.000 Recv: $30=1000 Recv: $31=0 Recv: $32=0 Recv: $38=10 Recv: $100=800.000 Recv: $101=800.000 Recv: $102=800.000 Recv: $110=2000.000 Recv: $111=2000.000 Recv: $112=100.000 Recv: $120=20.000 Recv: $121=20.000 Recv: $122=20.000 Recv: $130=500.000 Recv: $131=500.000 Recv: $132=200.000 Send: $I Send: $G Recv: ok Recv: [VER:1.1f.20220618:] Send: ? Recv: [OPT:VMZL,35,254] Recv: ok Recv: [GC:G0 G54 G17 G21 G90 G94 M5 M M9 T0 F0 S0] Recv: ok Recv: <Idle|MPos:2.000,-15.000,0.000|Bf:35,254|FS:0,0> Recv: ok

garyzz commented 1 year ago

Please NOTE Possible Fix?

--- I removed a plugin Spool Manager and now these GRBL settings have appeared ---

synman commented 1 year ago

I'm guessing I have a knockout.js issue of some kind with that plugin.

synman commented 1 year ago

I'm going to flag this as a bug and leave it open. Spool Manager doesn't sound like all that vital of a plugin as part of a CNC workflow but I understand the challenge if you are trying to use the same Octoprint instance for both 3d printing and CNC workflows.

There are a number of other limitations at play too that do not make this a simple / doable thing.