error codes, now motor 3 doesnt work. Please Help!!!

[ostintdd]

this is what comes up after i connect to the tinyg through CNCjs

I �ډ2ى҂rʺ�b2��Ң��r��bB��ҊbBى҂bJ��������jj%�J�IRkז$'$S+V-�Ҭ��V��$��� RT��JR�)ډ�ɉ�ډ2ى҂rʺ�b2��Ң��r��bB��ҊbBى��bJ��������jj%�J�IRkז$'��VUQS��EADY"}} {"qr":32} feeder> {ej:1} {"r":{"ej":1},"f":[3,0,10]} feeder> {jv:4} feeder> {qv:1} {"sr":{"line":0,"posx":0.000,"posy":0.000,"posz":0.000,"posa":0.000,"feed":0.00,"vel":0.00,"unit":0,"coor":1,"dist":0,"admo":1,"frmo":1,"momo":4,"stat":1}} {"r":{"jv":4},"f":[3,0,10]} feeder> {sv:1} feeder> {si:100} {"r":{"qv":1},"f":[3,0,10]} {"r":{"sv":1},"f":[3,0,10]} {"r":{"si":100},"f":[3,0,10]} feeder> {spe:n} {"r":{},"f":[3,100,10]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {spd:n} {"r":{},"f":[3,100,10]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {spc:n} {"r":{},"f":[3,100,10]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {sps:n} {"r":{},"f":[3,100,10]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {com:n} {"r":{},"f":[3,100,10]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {cof:n} {"r":{},"f":[3,100,10]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {sr:{line:t,vel:t,feed:t,stat:t,cycs:t,mots:t,hold:t,momo:t,coor:t,plan:t,unit:t,dist:t,frmo:t,path:t,posx:t,posy:t,posz:t,posa:t,posb:t,posc:t,mpox:t,mpoy:t,mpoz:t,mpoa:t,mpob:t,mpoc:t,spe:t,spd:t,spc:t,sps:t,com:t,cof:t}} {"er":{"fb":449.01,"st":13,"msg":"Buffer full non-fatal - {cof:n}"}} {"sr":{"stat":2}} {"r":{},"f":[3,204,10]} {"err":{"code":204,"msg":"Command rejected by ALARM [$clear to reset]"}}

[cmcgrath5035]

You might want to load the Master branch binary, firmware 440.20, and see if problem exists there. From the above it appears you have loaded tinyG Edge branch, 449.01.

[ril3y]

closing due to lack of activity

[mjomairi]

I'm coming across a similar issue. When I connect my Nema17 to Motor3 it creates a humming sound but it doesn't operate. This is what I get in the console when I connect tinyG to cncJs

{"r":{"jv":4},"f":[1,0,7,7333]} {"sr":{"posx":0.000,"posy":0.000,"posz":0.000,"posa":0.000,"feed":0.00,"vel":0.00,"unit":0,"coor":1,"dist":0,"frmo":1,"stat":1}} {"r":{"qv":1},"f":[1,0,7,6003]} {"r":{"sv":1},"f":[1,0,7,9250]} {"r":{"si":100},"f":[1,0,9,2707]} feeder> {spe:n} {"r":{"spe":null},"f":[1,100,8,8836]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {spd:n} {"r":{"spd":null},"f":[1,100,8,6786]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {spc:n} {"r":{"spc":null},"f":[1,100,8,4736]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {sps:n} {"r":{"sps":null},"f":[1,100,8,704]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {com:n} {"r":{"com":null},"f":[1,100,8,2342]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {cof:n} {"r":{"cof":null},"f":[1,100,8,4826]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} feeder> {sr:{stat:t,line:t,vel:t,feed:t,unit:t,coor:t,momo:t,plan:t,path:t,dist:t,admo:t,frmo:t,tool:t,posx:t,posy:t,posz:t,posa:t,posb:t,posc:t,mpox:t,mpoy:t,mpoz:t,mpoa:t,mpob:t,mpoc:t}} feeder> {sys:n} feeder> {mt:n} feeder> {pwr:n} feeder> {qr:n} feeder> {sr:n} {"r":{"sr":{"stat":true,"line":true,"vel":true,"feed":true,"unit":true,"coor":true,"momo":true,"plan":true,"path":true,"dist":true,"admo":true}},"f":[1,100,181,722]} {"err":{"code":100,"msg":"Unrecognized command or config name"}} {"r":{"sys":{"fb":440.20,"fv":0.970,"hp":1,"hv":8,"id":"9U6538-TRC","ja":3937,"ct":0.0004,"sl":0,"st":0,"mt":2.00,"ej":1,"jv":4,"js":1,"tv":1,"qv":1,"sv":1,"si":100,"ec":0,"ee":0,"ex":1,"baud":5,"net":0,"gpl":0,"gun":0,"gco":1,"gpa":2,"gdi":0}},"f":[1,0,8,8303]} {"r":{"mt":2.00},"f":[1,0,7,1467]} {"r":{"pwr":{"1":0,"2":0,"3":0,"4":0}},"f":[1,0,8,9987]} {"r":{"qr":32},"f":[1,0,7,7766]} {"r":{"sr":{"posx":0.000,"posy":0.000,"posz":0.000,"posa":0.000,"feed":0.00,"vel":0.00,"unit":0,"coor":1,"dist":0,"frmo":1,"stat":1}},"f":[1,0,7,7874]}

[cmcgrath5035]

Commenting on a closed issue is really tough to find, you probably need to open a new issue and describe a bit what did work and now what does not a bit more.