Open ramshell2019 opened 5 years ago
With this efi, the clover resolution was very low at the beginning, and later I modified some of the config-boot options, and the display is normal. Then I encountered a very slow boot, -v mode saw the reason, deleted VerbStub.kext startup speed is normal. Then in the upper right corner of the taskbar, there is a usb controller - basic system peripheral switch icon, manually drag and delete, restart and come back, The icon is nothing, the key is not careful to point to the option to shut down directly.
I have a Dell da200 that first boots into the device and recognizes it properly. After the device is hibernated, the device cannot work. It is still not possible to re-plug it. It must be restarted before it can work normally.
try to remove the Sinetek kext in clover
用了这个efi,开始的时候clover分辨率很低,后面我修改了部分config-boot选项,显示正常了。 然后又碰到开机非常慢,-v模式看到原因,删除了VerbStub.kext启动速度正常了。 然后右上角任务栏多了一个usb控制器-基本系统外设开关图标,手动拖动删除后重启又回来, 图标没什么,关键不小心点到选项的话直接关机。