search

syssi / esphome-pipsolar

ESPHome component to monitor and control a pipsolar inverter via RS232
Apache License 2.0
78 stars 35 forks source link

Adding external componen not found #114

Open unknown1818 opened 3 months ago

unknown1818 commented 3 months ago

Im trying to add axternal component to my conf in esphome

external_components:

but get error when compiling

In file included from src/esphome/components/pipsolar/pipsolar.cpp:1: src/esphome/components/pipsolar/pipsolar.h:7:10: fatal error: esphome/components/pipsolar/select/pipsolar_select.h: No such file or directory

include "esphome/components/pipsolar/select/pipsolar_select.h"

      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

compilation terminated. *** [.pioenvs/test/src/esphome/components/pipsolar/pipsolar.cpp.o] Error 1

syssi commented 3 months ago

A clean build is required. If you use the ESPHome dashboard there should be a clean button somewhere. If you use the CLI:

esphome clean yourconfig.yaml
esphome run yourconfig.yaml
unknown1818 commented 3 months ago

I got it working couple seconds ago with this default yaml

https://github.com/syssi/esphome-pipsolar/blob/pip8048/esp32-example.yaml

But:

pipsolar pv1_input_current 0.0 A pipsolar pv1_input_voltage 112.2 V

Why input current showing 0.0 A im currently using it at 150watts

unknown1818 commented 3 months ago

pipsolar ac_charging_status wyłączono pipsolar ac_output_active_power 0,0 W pipsolar ac_output_apparent_power 0,0 VA pipsolar ac_output_frequency 49,9 Hz pipsolar ac_output_voltage 234,9 V pipsolar add_sbu_priority_version wyłączono pipsolar battery_capacity_percent 0,0% pipsolar battery_charging_current 0,0 A pipsolar battery_discharge_current 0,0 A pipsolar battery_voltage 3,3 V pipsolar battery_voltage_offset_for_fans_on 0,0 V pipsolar battery_voltage_scc 0,0 V pipsolar battery_voltage_to_steady_while_charging wyłączono pipsolar bus_voltage 395,0 V pipsolar charging_status wyłączono pipsolar charging_to_floating_mode wyłączono pipsolar configuration_status wyłączono pipsolar device_mode L pipsolar grid_frequency 49,9 Hz pipsolar grid_voltage 234,9 V pipsolar inverter_heat_sink_temperature 18,0 °C pipsolar lcd_escape_to_default włączono pipsolar load_status włączono pipsolar output_load_percent 0,0% pipsolar over_temperature_restart_function wyłączono pipsolar overload_bypass_function wyłączono pipsolar overload_restart_function wyłączono pipsolar pv1_charging_power 1,0 W pipsolar pv1_input_current 0,0 A pipsolar pv1_input_voltage 117,0 V pipsolar pv2_charging_power nieznany pipsolar pv2_input_current nieznany pipsolar pv2_input_voltage nieznany pipsolar scc_charging_status wyłączono pipsolar silence_buzzer_open_buzzer włączono pipsolar switch_on włączono

unknown1818 commented 3 months ago

Its a hybrid inventer working without battery, do i need battery to show wattage from pv ?