Closed shamirahim111 closed 7 months ago
RS-233 to ttl pin vcc to 3.3 esp8266 , RS-232 to ttl pin gnd to G esp8266 Rs232 to ttl pin txd to D2 esp8266 Rs232 to ttl pin rxd to D1 of ESP8266
in your photo, D1 mini pins are G, D1, D2 and SV3? so these pins aren't all visible in https://robu.in/product/nodemcu-esp8266-v3-lua-ch340-wifi-dev-board/
Are you sure? This image of your board shows GND
, 3.3V
, D1 = GPIO5
, D2 = GPIO4
:
hi.
i have an inverter that has rs-232 port. i have bought one rs-232 to TTL serial converter https://robu.in/product/rs232-to-ttl-serial-interface-module/
this has just 4 pinouts,
VCC, gnd, RX, Tx
in your photo, D1 mini pins are G, D1, D2 and SV3? so these pins aren't all visible in https://robu.in/product/nodemcu-esp8266-v3-lua-ch340-wifi-dev-board/
so which should be connected where?
any help would be appreciated