search

syssi / esphome-soyosource-gtn-virtual-meter

ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
Apache License 2.0
78 stars 21 forks source link

Inverter for 36v battery #165

Open marine1988 opened 8 months ago

marine1988 commented 8 months ago

Hello o have a bunch of 36v lithio batteries and wnat to make usefulk on my solar system. I saw this inverter grid tie with limiter that are perfect except for the fact that is wired limited an my inverter is away from the total of my grid. I have home assistant and shelly 3pm values can I use it to limit my inverter? Sorry I'm noob thank you

card917 commented 8 months ago

yes you can do it if your consumption sensor exposed to ha. you can put the sensor name in powermeter0 section in the code. make sure that the unit is in W. mine is in kW then i have to put a filter to multiply by 1000. then it works just fine.

syssi commented 8 months ago

Please keep in mind the Soyosource can be used as photovoltaics inverter or battery inverter only. You cannot use the inverter to charge your batteries!

marine1988 commented 7 months ago

Yes i know i bought 1 mppt charge to charge batteries i bought soyosource with wifi version seller say it only can have wifi or screen not both so I prefed wifi now i installed the code in esp home logs show is working but i have no information about the inverter whet do I need to do now?

marine1988 commented 7 months ago

@syssi can I send a pm to you please I need some help with my configuration 20240226_125351

syssi commented 7 months ago

Could you try to upload your image another time?

marine1988 commented 7 months ago

yes i can @syssi i buyed the wifi version of inverter and want to have all the infos in esphome to home assistant can make chages how can i do it? what you recomend? Now i have basic version allready working thanks to you my friend! Thank you please send me a pm rogerio17.ff@gmail.com 20240302_125706

syssi commented 1 month ago

Do you still have questions? :-) Are you happy with your setup and can we close this issue?