search

syssi / esphome-soyosource-gtn-virtual-meter

ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
Apache License 2.0
76 stars 21 forks source link

Consider power_demand_divider when computing the power_demand #87

Closed DL6ER closed 1 year ago

DL6ER commented 1 year ago

Easy fix for https://github.com/syssi/esphome-soyosource-gtn-virtual-meter/issues/86

DL6ER commented 1 year ago

Screenshot from 2022-10-01 12-40-38

Tested with a manual setting of 703 Watts leading to a power generation of about 1.4 kW: signal-2022-10-01-124519

The uppermost value "Solarstrom" is independently measured using a "real" power meter read by the ESP through the 10.000 pulses/kWh output.

Even if probably not relevant at all, I feel I should still say it here: I use this setup to deliver additional power (if needed) to my solar island with an inverter that is just a tiny bit too small sometimes. My inverters are not connected to the public power grid.

DL6ER commented 1 year ago

Closing in favor of https://github.com/syssi/esphome-soyosource-gtn-virtual-meter/pull/88