t2linux / T2-Ubuntu

Ubuntu for T2 Macs
594 stars 52 forks source link

MacBookPro16,2 appletbdrm does not bind to touchbar display #131

Closed chithanh closed 3 months ago

chithanh commented 3 months ago

When booting the T2 Linux Ubuntu image (24.04, kernel 6.9.5-1-t2-noble) on a MacBook Pro 16,2 the touchbar stays dark, doesn't accept input, and appletbdrm is not loaded. Loading the appletbdrm module manually makes no difference. It appears that the driver either does not include the correct hardware ID for the touch bar, or that the device is somehow hidden from the USB subsystem.

dmesg lspci -nnk lsusb -v lsusb -v -t modinfo appletbdrm

AdityaGarg8 commented 3 months ago

When booting the T2 Linux Ubuntu image (24.04, kernel 6.9.5-1-t2-noble) on a MacBook Pro 16,2 the touchbar stays dark, doesn't accept input, and appletbdrm is not loaded. Loading the appletbdrm module manually makes no difference. It appears that the driver either does not include the correct hardware ID for the touch bar, or that the device is somehow hidden from the USB subsystem.

dmesg lspci -nnk lsusb -v lsusb -v -t modinfo appletbdrm

Did you install tiny-dfr?

chithanh commented 3 months ago

Yes, tiny-dfr-0.3.0-1-noble is installed, but it does not find the dri node, presumably because appletbdrm didn't create it (card0 is the Intel iGPU).

$ sudo tiny-dfr 
thread 'main' panicked at src/main.rs:518:43:
called `Result::unwrap()` on an `Err` value: No touchbar device found, attempted: [
    /dev/dri/card0: Device or resource busy (os error 16)
]
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
$ ls -l /dev/dri/
total 0
drwxr-xr-x  2 root root         80 Aug  2 14:32 by-path
crw-rw----+ 1 root video  226,   0 Aug  2 14:50 card0
crw-rw----+ 1 root render 226, 128 Aug  2 14:50 renderD128
AdityaGarg8 commented 3 months ago

Yes, tiny-dfr-0.3.0-1-noble is installed, but it does not find the dri node, presumably because appletbdrm didn't create it (card0 is the Intel iGPU).

$ sudo tiny-dfr 
thread 'main' panicked at src/main.rs:518:43:
called `Result::unwrap()` on an `Err` value: No touchbar device found, attempted: [
    /dev/dri/card0: Device or resource busy (os error 16)
]
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
$ ls -l /dev/dri/
total 0
drwxr-xr-x  2 root root         80 Aug  2 14:32 by-path
crw-rw----+ 1 root video  226,   0 Aug  2 14:50 card0
crw-rw----+ 1 root render 226, 128 Aug  2 14:50 renderD128

If you run sudo touchbar --switch and restart you Mac, does it still work?

AdityaGarg8 commented 3 months ago

Btw, if you are running sudo tiny-dfr, you have to first disable the systemd service (sudo systemctl disable --now tiny-dfr), else it will show the error.

chithanh commented 3 months ago

The systemd tiny-dfr.service fails to start anyway and tiny-dfr is not running according to ps aux. I am trying touchbar --switch next.

chithanh commented 3 months ago

As I am booting the LiveUSB image, it didn't make a difference. With some tinkering (blacklisting apple_bce at boot, then loading apple_ibridge, apple_touchbar, and apple_bce in that order), the touchbar still does not work and I got the following output:

[  343.119515] usb 5-6: New USB device found, idVendor=05ac, idProduct=8302, bcdDevice= 2.01
[  343.119521] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  343.119523] usb 5-6: Product: Touch Bar Display
[  343.119524] usb 5-6: Manufacturer: Apple Inc.
[  343.119525] usb 5-6: SerialNumber: 0000000000000000
[  343.126671] input: Apple Inc. Touch Bar Display as /devices/pci0000:00/0000:00:1c.4/0000:e6:00.1/apple-bce/apple-bce/bce-vhci/usb5/5-6/5-6:1.0/0003:05AC:8302.000A/input/input15
[  343.127695] bce-vhci: [00] URB failed: 3
[  343.186492] apple-touchbar 0003:05AC:8302.000A: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0
[  343.186886] bce_vhci_reset_device 7
[  343.318367] usb 5-7: new high-speed USB device number 8 using apple-bce
[  343.318372] bce_vhci_enable_device
[  343.318859] bce_vhci_cmd_device_create 7 -> 7
[  343.321240] bce_vhci_reset_device 7
[  343.321242] bce-vhci: Not implemented: wait for pending output requests
[  343.450478] bce_vhci_enable_device
[  343.478207] usb 5-7: New USB device found, idVendor=05ac, idProduct=8102, bcdDevice= 2.01
[  343.478219] usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  343.478223] usb 5-7: Product: Touch Bar Backlight
[  343.478227] usb 5-7: Manufacturer: Apple Inc.
[  343.478230] usb 5-7: SerialNumber: 0000000000000000
[  343.487572] apple-touchbar 0003:05AC:8102.000B: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0
[  343.569235] hid-apple-magic-backlight 0003:05AC:8102.000C: hiddev6,hidraw9: USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1
[  348.742551] apple-touchbar 0003:05AC:8302.000A: tb: Failed to set touch bar mode to 2 (-110)

If necessary, I can see if I can locate another USB drive to make a proper install to. But if I am not mistaken, appletbdrm still needs to bind to the hardware and create a /dev/dri node before the touchbar can work.

AdityaGarg8 commented 3 months ago

As I am booting the LiveUSB image, it didn't make a difference. With some tinkering (blacklisting apple_bce at boot, then loading apple_ibridge, apple_touchbar, and apple_bce in that order), the touchbar still does not work and I got the following output:

[  343.119515] usb 5-6: New USB device found, idVendor=05ac, idProduct=8302, bcdDevice= 2.01
[  343.119521] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  343.119523] usb 5-6: Product: Touch Bar Display
[  343.119524] usb 5-6: Manufacturer: Apple Inc.
[  343.119525] usb 5-6: SerialNumber: 0000000000000000
[  343.126671] input: Apple Inc. Touch Bar Display as /devices/pci0000:00/0000:00:1c.4/0000:e6:00.1/apple-bce/apple-bce/bce-vhci/usb5/5-6/5-6:1.0/0003:05AC:8302.000A/input/input15
[  343.127695] bce-vhci: [00] URB failed: 3
[  343.186492] apple-touchbar 0003:05AC:8302.000A: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0
[  343.186886] bce_vhci_reset_device 7
[  343.318367] usb 5-7: new high-speed USB device number 8 using apple-bce
[  343.318372] bce_vhci_enable_device
[  343.318859] bce_vhci_cmd_device_create 7 -> 7
[  343.321240] bce_vhci_reset_device 7
[  343.321242] bce-vhci: Not implemented: wait for pending output requests
[  343.450478] bce_vhci_enable_device
[  343.478207] usb 5-7: New USB device found, idVendor=05ac, idProduct=8102, bcdDevice= 2.01
[  343.478219] usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  343.478223] usb 5-7: Product: Touch Bar Backlight
[  343.478227] usb 5-7: Manufacturer: Apple Inc.
[  343.478230] usb 5-7: SerialNumber: 0000000000000000
[  343.487572] apple-touchbar 0003:05AC:8102.000B: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0
[  343.569235] hid-apple-magic-backlight 0003:05AC:8102.000C: hiddev6,hidraw9: USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1
[  348.742551] apple-touchbar 0003:05AC:8302.000A: tb: Failed to set touch bar mode to 2 (-110)

If necessary, I can see if I can locate another USB drive to make a proper install to. But if I am not mistaken, appletbdrm still needs to bind to the hardware and create a /dev/dri node before the touchbar can work.

Late loading of apple-bce is an extremely bad idea. This module should instead be loaded as soon as possible.

And didn't you do touchbar --switch in a proper installation?

Why do you have hid-apple-magic-backlight, this driver is no longer used. What ISO are you using? What drivers are you trying to install?

Talking about appletbdrm, the driver is written perfectly. Touchbar on MacBooks have 2 modes: 1. Windows mode with the basic media controls and F keys and 2. The fancy macOS mode which makes it a second display.

By default the touchbar enters the Windows mode and is managed by hid-appletb-kbd driver. Basically the driver is quite stripped off so Windows mode doesn't really exist now. To make it work in the macOS mode, we use a udev rule to bind it to the appletbdrm driver and it is shipped with tiny-dfr.

I believe you are using some old iso, or there is something else wrong here.

AdityaGarg8 commented 3 months ago

touchbar --switch blacklists all the touchbar drivers and installs another driver named apple-touchbar. This is a fully fledged working driver for the Windows mode. It also disables the udev rule. If you are not getting this to work, there is something seriously wrong with your setup. Maybe you messed up something? Maybe you are doing something different from the standard ways?

And DO NOT message with apple-bce. It's function is to expose your inbuilt USB devices which includes your touchbar, trackpad and keyboard.

AdityaGarg8 commented 3 months ago

I would appreciate the answers to these questions:

  1. What ISO are you using?
  2. Before installing tiny-dfr, did you try to follow some random guide to get the touchbar working?
  3. After installing tiny-dfr, did you restart?
  4. You mentioned live iso in an answer before. Do you know that you need a proper reboot which is possible in a persistent storage to make it effective?
  5. From where did hid-apple-magic-backlight come from?
AdityaGarg8 commented 3 months ago

It would also be nice if you share your complete journalctl

chithanh commented 3 months ago

Talking about appletbdrm, the driver is written perfectly.

But modinfo appletbdrm says alias: usb:v05ACp8302d*dc*dsc*dp*ic10isc*ip*in* which I understand means it is supposed to be loaded when such hardware is present and bind to it. But that doesn't happen.

What ISO are you using?

I'm using ubuntu-24.04-6.9.5-t2-noble.iso from https://github.com/t2linux/T2-Ubuntu/releases which I realize is not the latest, but fairly recent. I will do all further tests with the very latest ISO.

Before installing tiny-dfr, did you try to follow some random guide to get the touchbar working?

No. I only ran modprobe appletbdrm then apt update then apt install tiny-dfr.

After installing tiny-dfr, did you restart?

You mentioned live iso in an answer before. Do you know that you need a proper reboot which is possible in a persistent storage to make it effective?

With that ISO, there seems to be no persistent storage besides the system logs.

From where did hid-apple-magic-backlight come from?

I did not install it explicitly. It seems to be part of the apple-touchbar driver which was built by touchbar --switch.

chithanh commented 3 months ago

Ok, when blacklisting the correct drivers then the touchbar works with apple-touchbar, without a reboot.

journalctl output after sudo apt update && sudo apt install tiny-dfr

journalctl (touchbar not working)

After booting with modprobe.blacklist=appletbdrm,hid_appletb_kbd,hid_appletb_bl then sudo apt update && sudo apt install tiny-dfr then sudo touchbar --switch then sudo modprobe apple-ibridge && sudo modprobe apple-touchbar (apple-ibridge might be unnecessary) then the touchbar works (in basic mode).

journalctl (touchbar working with apple-touchbar)

chithanh commented 3 months ago

I found the option for persistence, I had to add persistent to kernel boot parameters, by default this was off.

With persistence and after reboot, the appletbdrm driver now binds to interface 1 of USB device 05ac:8302 which it didn't do before, and the touchbar works.

If I blacklist appletbdrm and load it manually after boot, then it will not work. Maybe a race condition?

In any case, I guess the issue can be closed now. There is probably no problem in appletbdrm itself, as you wrote correctly in https://github.com/t2linux/T2-Ubuntu/issues/131#issuecomment-2265833845

AdityaGarg8 commented 3 months ago

I found the option for persistence, I had to add persistent to kernel boot parameters, by default this was off.

With persistence and after reboot, the appletbdrm driver now binds to interface 1 of USB device 05ac:8302 which it didn't do before, and the touchbar works.

If I blacklist appletbdrm and load it manually after boot, then it will not work. Maybe a race condition?

Yes it's probably a race condition here. If you don't want persistent storage, you'll have to modify the iso to have tiny-dfr by default, so that the udev rule, which works only at boot becomes effective.

In any case, I guess the issue can be closed now. There is probably no problem in appletbdrm itself, as you wrote correctly in #131 (comment)