search

tapparelj / gr-lora_sdr

This is the fully-functional GNU Radio software-defined radio (SDR) implementation of a LoRa transceiver with all the necessary receiver components to operate correctly even at very low SNRs. This work has been conducted at the Telecommunication Circuits Laboratory, EPFL.
https://www.epfl.ch/labs/tcl/
GNU General Public License v3.0
687 stars 74 forks source link

Demodulator LORA 2.4GHZ SX128X #117

Open MVPGLOCK opened 1 month ago

MVPGLOCK commented 1 month ago

Good afternoon, I put together a circuit and recorded the signal from the drone control panel on HackRF with a frequency of 2.4 GHz, saw on the spectrum that LORA was transmitted and wanted to demodulate, opened the recommendations and the characteristics of the signal and drove into the circuit photo_2024-10-28_00-33-20 photo_2024-10-28_00-33-20

Here photo_2024-10-28_00-34-22 But when demodulating, the error Header Checksum invalid photo_2024 comes out-10-28_00-34-22 Can you help. I just tried to set various other parameters and according to other recommendations that are only available on the Internet, but alas they did not display anything. I tried to enter, let's say this is SX128x - LoRa Begin method: Carrier frequency: 2400.0 MHz Bandwidth: 812.5 kHz (dual-sideband) Spreading factor: 9 Coding rate: 4/7, long interleaving disabled Output power: 10 dBm Preamble length: 12 symbols Other: LoRa header mode: explicit LoRa CRC: enabled, 2 bytes Inaccessible: LDO regulator mode: disabled (SX128x module with DC-DC power supply) Number of CAD symbols: 8 But unsuccessfully, and now more or less something has appeared.

eabase commented 2 weeks ago

Why is this in Russian? I guess if you can't be bothered to translate and post in English, anyone who can help you will probably also not bother...