search

tbfleming / jscut

In-browser CAM package
http://jscut.org
GNU General Public License v3.0
295 stars 136 forks source link

Tabs and Retract to clearance #51

Open nsiatras opened 7 years ago

nsiatras commented 7 years ago

Hello,

Everytime I add tabs to the design I want to cut the generated gcode keeps sending the Z axis to the clearance level before moving it to the next pass depth.

Is there any way to change that ?

tbfleming commented 7 years ago

It normally doesn't do that. Can you post a test case? Save Settings -> Gist then post the link here.

nsiatras commented 7 years ago

Here are the settings but I dont think it has to do with that https://gist.github.com/anonymous/a321e9139d5f67a075ad23ff09197220

tbfleming commented 7 years ago

You saved before you loaded an SVG and added your operations and tabs. If you save after you do all that I'll get a complete reproduction. Make sure you're OK sharing your SVG before doing this.

nsiatras commented 7 years ago

Sorry. I saved it again with an svg loaded. https://gist.github.com/anonymous/43ce313738bf094d80e7e93288932f8a

tbfleming commented 7 years ago

Very odd. That issue appears to be tied to the shape.

nsiatras commented 7 years ago

The same bug happens with all shapes. Even a simple circle or square. Try make a simple square, add tabs and you will see your own.

On Sat, Aug 6, 2016 at 6:26 PM, Todd Fleming notifications@github.com wrote:

Very odd. That issue appears to be tied to the shape.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/tbfleming/jscut/issues/51#issuecomment-238028701, or mute the thread https://github.com/notifications/unsubscribe-auth/AFvq7nDn04XKVTHyM3xB7sOcVLcRlssAks5qdKeRgaJpZM4JdebI .