search

tcesni / crossepg

Automatically exported from code.google.com/p/crossepg
GNU Lesser General Public License v2.1
0 stars 0 forks source link

Only imported EPG-Data are stored on newer DMM-Builds (Dreambox) #62

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
DMM-Experimental-Image on a Dreambox; CrossEPG is activated via added 
"/usr/crossepg/crossepg_epgmove.sh" line in enigma2.sh

Only imported (OpenTV, XMLTV, ...) EPG-Data are stored, while regular EPG-Data 
which are downloaded when switching to a channel, are no longer there when I 
restart the Dreambox. 

As long as I leave the Dreambox on or put it only to standby everything is 
fine, but as soon as I restart the Dreambox only the imported EPG-Data are 
there and I need to switch to the other Channels in order to get the new 
EPG-Data.

Original issue reported on code.google.com by tom.spam...@gmail.com on 5 Dec 2010 at 10:15

GoogleCodeExporter commented 8 years ago 
Just change "Force EPG reload on boot" to no,then the complete epg data is 
restored.

Original comment by armitage...@gmail.com on 6 Dec 2010 at 11:16

GoogleCodeExporter commented 8 years ago 
Correct.
If "Force EPG reload on boot" is "Yes", when you restart the Dreambox the 
internal Enigma2 EPG database is populated/filled with CrossEPG data loosing 
other data.

Original comment by aleam...@gmail.com on 8 Dec 2010 at 7:34

GoogleCodeExporter commented 8 years ago 
With an unpatched image (loading epg with the fix 
/usr/crossepg/crossepg_epgmove.sh in enigma2.sh) every e2 reboot the internal 
epg will be replaced with crossepg epg (to enable MHW epg you always need tune 
e2 on the right channels after a reboot).
The only way to avoid this is use a patched image.

Original comment by skama...@gmail.com on 8 Dec 2010 at 3:17