tdot00c / ardupirates

Automatically exported from code.google.com/p/ardupirates
0 stars 0 forks source link

Testflights done R212 HExacopter #7

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
1. Acro Mode works fine 
2. Stabel Mode works fine

3. GPS Hold works fine
4. Altitude Hold is not very good ( maybe my Settings !! )

5. Swichtes should be changed like Warthox said in Issue 6

Testflights done.
Works very fine only Problem is the Altitude Hold in my case.
Copter goes up and down very often for 50 cm.
Position Hold works fine only.

Maybe a short Video later.

Regards Norbert

Original issue reported on code.google.com by norbert....@googlemail.com on 5 Jan 2011 at 2:26

GoogleCodeExporter commented 9 years ago
CC to you 

Original comment by norbert....@googlemail.com on 5 Jan 2011 at 2:29

GoogleCodeExporter commented 9 years ago
Here a short Video

http://vimeo.com/18463091

Original comment by norbert....@googlemail.com on 5 Jan 2011 at 3:22

GoogleCodeExporter commented 9 years ago
i tested the r212 too but had some problems.

1.as norf said the altitude hold dont works good but i think its a setup 
problem.
2.gps is working very good. but it dont locks out if i fly away. is it possible 
to change the code so gps lock out when i move the stick to fly to another 
point and than locks the new position when i let go the sticks?
3.switches should be changed like i wrote in the last issue.
4.i cant get the quad very stable in acromode

my testflight stopped here because the quad flipped over for no reasen in 
stable mode. 

Original comment by wart...@googlemail.com on 5 Jan 2011 at 3:49

GoogleCodeExporter commented 9 years ago
Remember Altitude Hold is not very accurate with BMP because of limitations on 
the sensor itself.  Did you try the Sonar sensor?  For GPS hold, just go to 
normal stable mode and fly to new position and relock.  Does not make sense to 
fly with GPS locked?  Acromode itself is not a very stable platform and only 
use gyro's so its for fun flying and acrobatric tricks.  Maybe you need to 
retune your Quad.  I think your suggestions for the Mode switches is good... I 
will look into this.

Original comment by lohnieh@gmail.com on 5 Jan 2011 at 6:18

GoogleCodeExporter commented 9 years ago
i dont have a sonar sensor. but its good to know that the bmp isnt that good 
and for me its no really important to have altitude hold.
i know the gps behavoir i described from the mikrokopter project and i think 
its a good feature. but if we can switch gps separatly in future its not a big 
deal to lock and unlock manually.
for the acro mode i can do a really good compare to kk and multiwiicopter 
because i fly them with gyros only. and espacially the mwc is very stable. but 
i know that the acro mode isnt the main feature of the arducopter.

Original comment by wart...@googlemail.com on 5 Jan 2011 at 10:01

GoogleCodeExporter commented 9 years ago
Can I use both sonar and BMP on onde time? The Original NG you can't use both 
sensor

Original comment by saifulaz...@gmail.com on 16 Jan 2011 at 4:08

GoogleCodeExporter commented 9 years ago
BMP and Sonar is suppose to work together

Original comment by lohnieh@gmail.com on 17 Jan 2011 at 5:47

GoogleCodeExporter commented 9 years ago
done

Original comment by lohnieh@gmail.com on 21 Jan 2011 at 9:11

GoogleCodeExporter commented 9 years ago
[deleted comment]
GoogleCodeExporter commented 9 years ago
We will have to do more flight test to inspect this behaviour.  I have only
a Quad with a sonar sensor, but will try to do some tests over the weekend.

Original comment by lohnieh@gmail.com on 26 Jan 2011 at 7:16

GoogleCodeExporter commented 9 years ago

Original comment by kidogof...@gmail.com on 26 Jan 2011 at 9:00