Not working on UE48J5248

[rubengt]

I think the UE48J5248 model version is limited and doesn't have the needed capabilities.

The PIN code on the TV never appears.

I have checked on this URL http://{IPAddress}:8080/ws/apps/CloudPINPage and seems to be "stopped"

CloudPINPage stopped

Additional info: there are 3 ports open on the TV

➜ ~ nmap -v -p- 192.168.1.40 Starting Nmap 7.70 ( https://nmap.org ) at 2018-08-03 03:34 CEST Initiating Ping Scan at 03:34 Scanning 192.168.1.40 [2 ports] Completed Ping Scan at 03:34, 0.00s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 03:34 Completed Parallel DNS resolution of 1 host. at 03:34, 0.01s elapsed Initiating Connect Scan at 03:34 Scanning 192.168.1.40 [65535 ports] Discovered open port 8080/tcp on 192.168.1.40 Discovered open port 7676/tcp on 192.168.1.40 Discovered open port 7011/tcp on 192.168.1.40 Completed Connect Scan at 03:34, 5.87s elapsed (65535 total ports) Nmap scan report for 192.168.1.40 Host is up (0.0039s latency). Not shown: 65532 closed ports PORT STATE SERVICE 7011/tcp open talon-disc 7676/tcp open imqbrokerd 8080/tcp open http-proxy

Read data files from: /usr/local/bin/../share/nmap Nmap done: 1 IP address (1 host up) scanned in 5.96 seconds

[raydog153]

@rubengt I have a UN40H5203 and does the same thing....what if you try and change the url from 'type=1' to 'type=0' in the code and see if you get PIN popup on TV, because I do if I do this. Would be nice to confirm someone else can reproduce same result.

[gzalo]

The same thing happens on j5200. Changing the type can lead to a successful pairing, but there is no 8000 port to connect to.

[Alan01252]

Inherited one of these old TVs couldn't get it working, no pin popup regardless of what I set the type to