GSOD after tuning in some channels (eg. on 80E)

[ahmedmoselhi]

I got GSOd after trying to tune in some channels on some sats ( eg. on 80E)

[gRC] Warning: Main thread is busy, displaying spinner!
[fb] double buffering is available.
[gFBDC] resolution: 720x576x32 stride=2880, 37260kB available for acceleration surfaces.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/fonts/andale.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/DejaVuSans.ttf' -> 'DejaVuSans'.
[Font] Adding font '/usr/share/fonts/ae_AlMateen.ttf' -> 'Replacement'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Regular.ttf' -> 'Subs'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Italic.ttf' -> 'Subsi'.
[Font] Adding font '/usr/share/fonts/LiberationSans-Bold.ttf' -> 'Subsb'.
[Font] Adding font '/usr/share/fonts/LiberationSans-BoldItalic.ttf' -> 'Subsz'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[fb] double buffering is available.
[gFBDC] resolution: 1920x1080x32 stride=7680, 24300kB available for acceleration surfaces.
[Font] Adding font '/usr/share/fonts/ae_AlMateen.ttf' -> 'Replacement'.
[Font] Adding font '/usr/share/fonts/tuxtxt.ttf' -> 'Console'.
[Font] Adding font '/usr/share/fonts/nmsbd.ttf' -> 'Arial'.
[Font] Adding font '/usr/share/enigma2/GigabluePaxV2/fonts/OpenSans-Regular.ttf' -> 'Regular'.
[Font] Adding font '/usr/share/enigma2/GigabluePaxV2/fonts/OpenSans-Regular.ttf' -> 'Fixed'.
[Font] Adding font '/usr/share/enigma2/GigabluePaxV2/fonts/setrixHD-Semilight.ttf' -> 'SetrixHD'.
[Font] Adding font '/usr/share/enigma2/GigabluePaxV2/fonts/meteocons.ttf' -> 'Meteo'.
[Font] Adding font '/usr/share/fonts/fallback.font' -> 'Fallback'.
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eTuxttxtApp] enable caching
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
[eConsoleAppContainer] Starting /bin/sh
[eDboxLCD] setLCDBrightness 25
[eDboxLCD] setLCDBrightness 127
[Font] Adding font '/usr/lib/enigma2/python/Plugins/Extensions/IPaudioPro/assets/fonts/IPPro.ttf' -> 'IPPro-icons'.
[Font] Adding font '/usr/lib/enigma2/python/Plugins/Extensions/IPaudioPro/assets/fonts/font_default.otf' -> 'ArabicFont'.
[eInit] + (41) eServiceFactoryMP3
[Avahi] AvahiServiceEntry (null) (_http._tcp) 80
[Avahi] Not running yet, cannot register type _http._tcp.
[eEPGCache] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[eEPGCache] /etc/enigma2/epg.dat not found, try /epg.dat
[eEPGTransponderDataReader] start Mainloop
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[eDVBVolumecontrol] Setvolume: raw: 55 55, -1db: 29 29
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eStaticServiceDVBBouquetInformation] getName failed.. getBouquet failed!
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBResourceManager] allocate channel.. 0002:0001
[eDVBFrontend0] opening frontend
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:E:2:1:2C10000:0:0:0:
[CI] recheckPMTHAndlers()
[CI] recheck 0x2e295e8 1:0:1:E:2:1:2C10000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 27(17)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 30(17)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 33(17)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 36(17)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 39(17)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 42(17)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 45(16)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 48(16)
[eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 56(16)
[eDVBFrontend0] set static current limiting
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 4
[eDVBFrontend0] setVoltage 2
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 1
[eDVBFrontend0] sleep 200ms
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] set dynamic current limiting
[eDVBServicePlay] timeshift
[eEPGCache] fillTuple unknown 'M'... insert 'None' in result
[eDVBChannel] OURSTATE: failed, retune
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 1 Freq 11050000 Pol 0 SR 20030000 INV 2 FEC 1 orbpos 705 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1300 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] tune failed.
[eDVBServicePlay] DVB service failed to tune - error 1
[eDVBServicePMTHandler] ignore sdt update data.... incorrect transponder tuned!!!
[eDVBServicePMTHandler] incorrect namespace. expected: 2c10000 current: ffffffff
[eDVBServicePMTHandler] incorrect transport_stream_id. expected: 2 current: ffffffff
[eDVBServicePMTHandler] incorrect original_network_id. expected: 1 current: ffffffff
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 7
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eStaticServiceDVBBouquetInformation] getName failed.. getBouquet failed!
[eEPGCache] fillTuple unknown 'M'... insert 'None' in result
[eServiceReference] find old format eServiceReference string
[eDVBFrontend0] set dynamic current limiting
[eEPGCache] fillTuple unknown 'M'... insert 'None' in result
[eServiceReference] find old format eServiceReference string
[eEPGCache] fillTuple unknown 'M'... insert 'None' in result
[eServiceReference] find old format eServiceReference string
[eEPGCache] fillTuple unknown 'M'... insert 'None' in result
[eServiceReference] find old format eServiceReference string
[eStaticServiceDVBBouquetInformation] getName failed.. getBouquet failed!
[eEPGCache] fillTuple unknown 'M'... insert 'None' in result
[eDVBServicePlay] timeshift
[CI] recheckPMTHAndlers()
[eDVBServicePlay] timeshift
[eDVBResourceManager] start release channel timer
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift
[eDVBLocalTimerHandler] remove channel 0x2115cf0
[eEPGTransponderDataReader] remove channel 0x2115cf0
[eDVBResourceManager] allocate channel.. 0066:0001
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 0 Freq 10981000 Pol 1 SR 44950000 INV 2 FEC 2 orbpos 800 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0, t2mi_plp_id -1 t2mi_pid 4096
[eDVBFrontend0] tuning to 1231 mhz
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:D7:66:1:3200000:0:0:0:
[CI] recheckPMTHAndlers()
[CI] recheck 0x2e295e8 1:0:1:D7:66:1:3200000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBFrontend0] set static current limiting
[eDVBServicePlay] timeshift
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] setVoltage 1
[eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 0
[eDVBFrontend0] sleep 75ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e01038f0(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1b, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2115cf0 running
[eEPGTransponderDataReader] channel 0x2115cf0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eEPGChannelData] next update in 2 sec
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend0] sleep 500ms
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=201
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 00d7 for service_id 00d7
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=215
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=202
[eDVBFrontend0] set dynamic current limiting
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2002
[eDVBServicePlay] have 1 video stream(s) (04bf), and 2 audio stream(s) (08a7, 0c8f), and the pcr pid is 04bf, and the text pid is 1077[eDVBChannel] getDemux cap=01
TuxTxt cache cleared
[eTSMPEGDecoder] decoder state: play, vpid=04bf, apid=08a7
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x04bf ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x08a7 ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 0 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x04bf ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBText0] DMX_SET_PES_FILTER pid=0x1077 ok
[eDVBText0] DEMUX_START ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 1077
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
TuxTxt running thread...(1077)
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBPESReader] DMX_SET_PES_FILTER pid=1077
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2002
[eDVBCAService] new service 1:0:1:D7:66:1:3200000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:D7:66:1:3200000:0:0:0:
[CI] recheckPMTHAndlers()
[CI] recheck 0x2e295e8 1:0:1:D7:66:1:3200000:0:0:0:
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=215
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=203
sh: line 1: /var/etc/PlugLoad.sh: No such file or directory
[eDVBServicePMTHandler] AITready
Save Data Len : [70]
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=2001
No found anything.
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=204
[convertDVBUTF8] (1..11)text encoded in ISO-8859-5
[convertDVBUTF8] (1..11)text encoded in ISO-8859-5
[convertDVBUTF8] (1..11)text encoded in ISO-8859-5
[convertDVBUTF8] (1..11)text encoded in ISO-8859-5
[convertDVBUTF8] (1..11)text encoded in ISO-8859-5
[convertDVBUTF8] (1..11)text encoded in ISO-8859-5
[convertDVBUTF8] (1..11)text encoded in ISO-8859-5
[ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xb05f1558>>,(4,)) failed)
[eEPGChannelData] start reading events(1721760534)
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eEPGChannelData] abort non avail schedule other reading