Race condition between chromedriver and selenium with a good stack trace indicating it

[krschacht]

Meta

Capybara Version: 3.39.2 Driver Information (and browser if relevant): selenium-webdriver (4.23.0) using headless chrome

Expected Behavior

I've been using successfully using Capybara in Rails for quite some time (many months). But one day, about a month ago, my system tests started sporadically failing in my Github CI Actions with Net::ReadTimeout with "Net::ReadTimeout with #<TCPSocket:(closed)>". If I re-run the test suite a few times I can eventually get it to successfully run through. I've tried many different workarounds but none of them work around the issue. I've tried rolling back all changes in my repo to months ago when tests were consistently passing, and that doesn't seem to fix it either.

We've spent many hours investigating the cause and we currently think there is a race condition somewhere between chromedriver and selenium. My project is an open source project so here is a direct link to one of the failed CI runs where you can see the full stack trace: https://github.com/AllYourBot/hostedgpt/actions/runs/10533347868/job/29189182499?pr=498

The Net::ReadTimeout is coming from capybara (aka selenium) failing to hit chromedriver when attempting to set up the server. One of my engineers has outlined his read of that stack trace:

• I think the tests run (and fail) before puma is started by capybara
• The test hung because the server was still running and ruby wouldn't exit
• It says the TCP socket was closed -- does this means the socket was open when it started but closed during the exchange? Or that it was never open? I suspect the former because the stack trace is in the middle of a read loop.
• The failure is in the area of code which causes chromedriver to build a new session (ie, start chrome up):

Also, another thing that suggests a race condition is that when we SSH into the job mid-run, it sometimes fails or hangs for a bit. But if I interrupt the process (^c) and then re-run it, it goes fine.

Steps to reproduce

1. On github you can fork this repo
2. I've configured the Github CI Actions to not run system tests on forks, but (a) delete this line to remove the short circuit, and (b) change the very next "runs-on" line back to ubuntu-latest which are the default Github Action servers.
3. Push a change to the repo to trigger Github CI to run

[woodhull]

We've also been experiencing this. We initially thought it was some problem with the first request timing out (like asset compilation?) but think we've eliminated those potential causes.

It still seems most likely there is a problem with our app, but maybe there is a regression with newer chrome or selenium versions.

We're also on GitHub Actions for what it's worth. One other theory we had is that the environment was cpu constrained on overloaded VMs within the GitHub actions runner pool.

[krschacht]

@woodhull try reverting your codebase to a point in time where CI was working, push that up to a branch/PR and see if it works. Ours doesn’t. This is how we determined it’s something outside of our codebase or gemfile.lock

[woodhull]

We resolved this by locking an older version of chromium. For us at least this started happening when alpine was upgraded to 3.19 to 3.20 and chrome along with it because we were letting the version float by basing our docker image on alpine without specifying an explicit version.

I tried the selenium-driver nightlies and the issue was still present there with the latest chrome version.

[searls]

Off-topic: I've lost so many hours to Selenium timing issues over the years, that I'm glad I bit the bullet and converted to Capybara+Playwright -- it's been rock solid so far, with approximately zero flakes in the two months since I switched. Here's the guide I wrote: https://justin.searls.co/posts/running-rails-system-tests-with-playwright-instead-of-selenium/

[robacarp]

@woodhull did you pin alpine and chromium+chromedriver, or just alpine?

[twalpole]

If there's a race condition between selenium and chromedriver shouldn't this be reported on once of those projects? Capybara doesn't really control their timing

[krschacht]

I opened this on Selenium's side too: https://github.com/SeleniumHQ/selenium/issues/14454