search

tecsci / electrophoresis-cell

Cuba de electroforesis de IORODEO.
0 stars 0 forks source link

Agregar modelos de corte al repo #3

Open naikymen opened 2 years ago

naikymen commented 2 years ago
naikymen commented 2 years ago

Aca se dice:

Acrylic materials and design files

From any supplier of acrylic materials (McMaster-Carr, US Plastics etc):

12” x 12” x 1/4" clear acrylic 12" x 12" x 1/4" blue acrylic (or preferred color) 5" x 5" x 1/8" clear acrylic

From McMaster-Carr:

6" x 6" x 1/16" teflon sheet , Cat # 8545K13

From Loop Acrylics:

1/8" solacryl (UV transmissive) - Optional : If you do not need a UV-transmissive gel tray then simply make these parts from regular clear acrylic.

Using the design files attached below, cut the parts from your material - the type of material to use is given in the title of the file. If you do not have access to a laser cutter, you can send the files to any laser cutting service (we use Pololu). These services will also carry most of the material you need with the exception of solacryl.You can also purchase a kit from our online store (IO Rodeo , Cat #IMG-01) for $93. The kit contains all of the laser cut parts and hardware, platinum wire (instead of stainless steel wire) and pre-assembled combs. You will still need to buy the Weld-On.

naikymen commented 2 years ago

Subí los modelos acá: https://github.com/tecsci/electrophoresis-cell/tree/main/modelos

Son PDFs para cortar.

naikymen commented 2 years ago

Hoy empecé a armar la cuba con Pepe, y nos falta una parte que sería el cuadrado donde se apoya la cama (flecha negra).

Creo que es el que está a la derecha en este archivo, que no cortamos porque era de otro espesor. Pero no estoy seguro.

image

También creo que faltan unas piecitas donde se ponen los electrodos (flecha negra con "?"). Que estan en este archivo que tampoco cortamos por el espesor.

Ideas?