teel / stasiscl

Automatically exported from code.google.com/p/stasiscl
0 stars 0 forks source link

Yogg report is blank, doesn't register attempts #143

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
What exactly went wrong? Was a particular stat reported incorrectly, was a 
raider assigned the 
wrong class or pets, was a log split up improperly, or was it something else? 
Please be as 
specific as you can with regard to particular fights, players, pets, or mobs.

For a combat log with 3.5 hours of attempts on Yoggy, I get this:

./stasis: Done processing. Found 30 players, 2759 pets, and 0 boss encounters.

Were there any error messages or warnings on the console when you ran the 
program?

No

NOTE: Please be prepared to send a copy of the combat log that caused you 
trouble. If you 
would like to post it now, please zip it first to save space.

Original issue reported on code.google.com by 19vett...@gmail.com on 15 May 2009 at 10:24

GoogleCodeExporter commented 8 years ago
Can you try updating and running again? This used to happen but it should be 
fixed by now. If it happens even 
after updating, please zip and post your log.

Original comment by gianmerlino@gmail.com on 15 May 2009 at 3:39

GoogleCodeExporter commented 8 years ago
Well, I can't upload a file....I am trying but I don't see it after....is there 
a limit on size?  mine is about 8.8Mb 
zipped?

Same thing happened this week, updated to 258 right before running....it just 
flat ignores Yoggy

Original comment by 19vett...@gmail.com on 24 May 2009 at 3:24

GoogleCodeExporter commented 8 years ago
OK, last weeks is http://www.fawws.net/WoWLog1.txt.zip

This weeks (Including kill) is http://www.fawws.net/WoWLog.txt.zip

Original comment by 19vett...@gmail.com on 24 May 2009 at 3:27

GoogleCodeExporter commented 8 years ago
I tried both of your logs using r258. The first one (wowlog1.txt.zip) worked 
without problems. The full output is:

% curl -s http://www.fawws.net/WoWLog1.txt.zip | funzip | ./stasis add -attempt 
-dir wowlog1
./stasis: Using directory: wowlog1
./stasis: Encounter start: yoggsaron at 5/14 19:47:07.463 .. writing Yogg-Saron 
try 1 (sws-yoggsaron-1242355627) .. done.
./stasis: Encounter start: yoggsaron at 5/14 19:57:45.097 .. writing Yogg-Saron 
try 2 (sws-yoggsaron-1242356265) .. done.
./stasis: Encounter start: yoggsaron at 5/14 20:13:39.934 .. writing Yogg-Saron 
try 3 (sws-yoggsaron-1242357219) .. done.
./stasis: Encounter start: yoggsaron at 5/14 20:21:34.033 .. writing Yogg-Saron 
try 4 (sws-yoggsaron-1242357694) .. done.
./stasis: Encounter start: yoggsaron at 5/14 20:39:59.991 .. writing Yogg-Saron 
try 5 (sws-yoggsaron-1242358799) .. done.
./stasis: Encounter start: yoggsaron at 5/14 20:49:07.849 .. writing Yogg-Saron 
try 6 (sws-yoggsaron-1242359347) .. done.
./stasis: Encounter start: yoggsaron at 5/14 20:57:18.287 .. writing Yogg-Saron 
try 7 (sws-yoggsaron-1242359838) .. done.
./stasis: Encounter start: yoggsaron at 5/14 21:13:11.634 .. writing Yogg-Saron 
try 8 (sws-yoggsaron-1242360791) .. done.
./stasis: Encounter start: yoggsaron at 5/14 21:28:00.419 .. writing Yogg-Saron 
try 9 (sws-yoggsaron-1242361680) .. done.
./stasis: Encounter start: yoggsaron at 5/14 21:34:09.005 .. writing Yogg-Saron 
try 10 (sws-yoggsaron-1242362049) .. done.
./stasis: Encounter start: yoggsaron at 5/14 21:41:16.721 .. writing Yogg-Saron 
try 11 (sws-yoggsaron-1242362476) .. done.
./stasis: Encounter start: yoggsaron at 5/14 21:58:30.293 .. writing Yogg-Saron 
try 12 (sws-yoggsaron-1242363510) .. done.
./stasis: Encounter start: yoggsaron at 5/14 22:18:24.254 .. writing Yogg-Saron 
try 13 (sws-yoggsaron-1242364704) .. done.
./stasis: Encounter start: yoggsaron at 5/14 22:38:35.621 .. writing Yogg-Saron 
try 14 (sws-yoggsaron-1242365915) .. done.
./stasis: Encounter start: yoggsaron at 5/14 22:45:37.731 .. writing Yogg-Saron 
try 15 (sws-yoggsaron-1242366337) .. done.
./stasis: Encounter start: yoggsaron at 5/14 22:58:16.195 .. writing Yogg-Saron 
try 16 (sws-yoggsaron-1242367096) .. done.
./stasis: Done processing. Found 30 players, 2759 pets, and 16 boss encounters.

The second one (wowlog.txt) seemed to work fine through 4 yogg attempts, a 
kill, then some sartharion and emalon. It wrote parses successfully for those. 
Then, it ran into a bunch of mangled lines like:

5/21 22:38:22.075  SPELL_D5/21 22:38:23.734  
SPELL_PERIODIC_DAMAGE,0x0200000001634D52,"Komui",0x514,0xF1300070BB000006,"Malyg
os",0xa48,48672,"Rupture",0x1,819,0,1,0,0,0,nil,nil,nil

Note "SPELL_D5/21". It looks like one line got cut off and attached to the 
next. I don't know why these lines are there, but they appear in the original 
text file and are definitely not normal. Even so, it managed to 
write out 8 parses before running into those and getting confused.

I don't know why you see zero bosses instead of what I see when I run your 
logs. Can you copy and paste the command you're running for these as well as 
its full output? Also, the output of "/usr/bin/perl -V".

Original comment by gianmerlino@gmail.com on 24 May 2009 at 5:17

GoogleCodeExporter commented 8 years ago
I run

./stasis add -dir /Users/Hunk/Desktop/FAwws/5_19ulduar -ver 2 -attempt -file 
/Users/Hunk/Desktop/FAwws/WoWCombatLog.txt 

Here is the output of the /usr/bin/perl -V

acPro:volumes Hunk$ /usr/bin/perl -V
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=darwin, osvers=9.0, archname=darwin-thread-multi-2level
    uname='darwin b02.apple.com 9.0 darwin kernel version 9.3.0: tue aug 12 17:18:07 pdt 2008; root:xnu-
1228.5.90~13release_i386 i386 '
    config_args='-ds -e -Dprefix=/usr -Dccflags=-g  -pipe  -Dldflags= -Dman3ext=3pm -Duseithreads -
Duseshrplib'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-arch ppc -arch i386 -g -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-
strict-aliasing -Wdeclaration-after-statement -I/usr/local/include',
    optimize='-O3',
    cppflags='-no-cpp-precomp -arch ppc -g -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -
fno-strict-aliasing -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Inc. build 5465)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc -mmacosx-version-min=10.5.7', ldflags ='-arch ppc -arch i386 -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lutil -lc
    perllibs=-ldl -lm -lutil -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=true, libperl=libperl.dylib
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags='-arch ppc -arch i386 -bundle -undefined dynamic_lookup -L/usr/local/lib'

Characteristics of this binary (from libperl): 
  Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
                        PERL_MALLOC_WRAP USE_ITHREADS USE_LARGE_FILES
                        USE_PERLIO USE_REENTRANT_API
  Locally applied patches:
    fix for regcomp CVE-2007-5116 security vulnerability
    fix for double-free CVE-2008-1927 security vulnerability
    /Library/Perl/Updates/<version> comes before system perl directories
    installprivlib and installarchlib points to the Updates directory
  Built under darwin
  Compiled at Mar 11 2009 16:09:08
  @INC:
    /Library/Perl/Updates/5.8.8
    /System/Library/Perl/5.8.8/darwin-thread-multi-2level
    /System/Library/Perl/5.8.8
    /Library/Perl/5.8.8/darwin-thread-multi-2level
    /Library/Perl/5.8.8
    /Library/Perl
    /Network/Library/Perl/5.8.8/darwin-thread-multi-2level
    /Network/Library/Perl/5.8.8
    /Network/Library/Perl
    /System/Library/Perl/Extras/5.8.8/darwin-thread-multi-2level
    /System/Library/Perl/Extras/5.8.8
    /Library/Perl/5.8.6
    /Library/Perl/5.8.1/darwin-thread-multi-2level
    /Library/Perl/5.8.1
    .
MacPro:volumes Hunk$ 

Original comment by 19vett...@gmail.com on 24 May 2009 at 6:00

GoogleCodeExporter commented 8 years ago
Ignore the Maly errors, I was 2 boxing and i run 1 game and a dupe of the .app, 
not a second folder, so i had 2 
apps writing to the same combat log......never works out well

Original comment by 19vett...@gmail.com on 24 May 2009 at 6:01

GoogleCodeExporter commented 8 years ago
OK, I renamed my stasis folder, and started with  "svn checkout 
http://stasiscl.googlecode.com/svn/trunk/ 
stasiscl"  all over again.  It downloaded 259  (Which I don't think has 
anything to do with parsing, but it 
worked fine.

I had been using that to update my directory since 240ish rev, dunno if it 
missed one or not, but it didn't 
work until I remade a new folder and downloaded the whole SVN.  It might be 
something on my end, but 
using a mac.....prolly not...but weirder things have happened  :)

Thanks for your time and patience, you have a fantastic product.

Original comment by 19vett...@gmail.com on 24 May 2009 at 6:08

GoogleCodeExporter commented 8 years ago
I don't know why you see zero bosses instead of what I see when I run your 
logs. Can you copy and paste the 
command you're running for these as well as its full output? Also, the output 
of "/usr/bin/perl -V".

That is what was so weird, I cut out alot of crap in the logs i uploaded, but 
it would parse the entire night...5-6 
bosses and there was NEVER even a mention in the window of Yogg, it was like it 
just flat out skipped that part 
of the log, but the other 5-6 bosses came out perfect.....

Original comment by 19vett...@gmail.com on 24 May 2009 at 6:10