Open GoogleCodeExporter opened 9 years ago
Thank you for your test on the IT8772E. I have added a similar implementation
by assuming the hardware is identical to IT8721F / IT8728F with respect to
hardware monitoring. Unfortunately I do not have any datasheet.
Some of the more basic voltage readings like VCore (most likely the first one)
should be correct now. In order to create a correct mainboard specific
configuration of the voltage scaling I would need screenshots of an official
hardware monitoring tool from Shuttle (with a report of the Open Hardware
Monitor just created before/after).
Original comment by moel.mich
on 2 Aug 2011 at 9:09
The initial support for the IT8772E can be found in revision r356.
Original comment by moel.mich
on 2 Aug 2011 at 9:10
Hello,
Unfortunately there is no tool provided by shuttle which displays the required
data. The only possiblity was to make a screenshot from the hardware monitor in
the BIOS. I attached the screenshot of the BIOS as well as a report from OHW
after booting.
Original comment by reinlrol...@gmail.com
on 6 Aug 2011 at 12:53
Attachments:
Thank you very much. With revision r357 I have added a mainboard specific
configuration for your system. Can you please check if everything is correct
now? And please submit a report once more.
Original comment by moel.mich
on 6 Aug 2011 at 5:29
Hello,
it seems to be correct now. Attached you will find another report using
revision r357
Original comment by reinlrol...@gmail.com
on 6 Aug 2011 at 5:51
Attachments:
I have added additional power sensors for Intel Sandy Bridge CPUs in the latest
SVN revision. Can you please run another test to see if everything works
correctly and post a report?
Original comment by moel.mich
on 11 Aug 2011 at 10:28
Attached you will find a report using r358
Original comment by reinlrol...@gmail.com
on 15 Aug 2011 at 8:28
Attachments:
Original issue reported on code.google.com by
reinlrol...@gmail.com
on 24 Jul 2011 at 11:11Attachments: