search

tektronix / tm_devices

Test & Measurement Device Management
https://tm-devices.readthedocs.io
Apache License 2.0
49 stars 21 forks source link

python-deps(deps-dev): update ruff requirement from 0.7.4 to 0.8.0 in the python-dependencies group #355

Closed dependabot[bot] closed 4 days ago

dependabot[bot] commented 5 days ago

Updates the requirements on ruff to permit the latest version. Updates ruff to 0.8.0

Release notes

Sourced from ruff's releases.

0.8.0

Release Notes

Check out the blog post for a migration guide and overview of the changes!

Breaking changes

See also, the "Remapped rules" section which may result in disabled rules.

  • Default to Python 3.9

    Ruff now defaults to Python 3.9 instead of 3.8 if no explicit Python version is configured using ruff.target-version or project.requires-python (#13896)

  • Changed location of pydoclint diagnostics

    pydoclint diagnostics now point to the first-line of the problematic docstring. Previously, this was not the case.

    If you've opted into these preview rules but have them suppressed using noqa comments in some places, this change may mean that you need to move the noqa suppression comments. Most users should be unaffected by this change.

  • Use XDG (i.e. ~/.local/bin) instead of the Cargo home directory in the standalone installer

    Previously, Ruff's installer used $CARGO_HOME or ~/.cargo/bin for its target install directory. Now, Ruff will be installed into $XDG_BIN_HOME, $XDG_DATA_HOME/../bin, or ~/.local/bin (in that order).

    This change is only relevant to users of the standalone Ruff installer (using the shell or PowerShell script). If you installed Ruff using uv or pip, you should be unaffected.

  • Changes to the line width calculation

    Ruff now uses a new version of the unicode-width Rust crate to calculate the line width. In very rare cases, this may lead to lines containing Unicode characters being reformatted, or being considered too long when they were not before (E501).

Removed Rules

The following deprecated rules have been removed:

Remapped rules

The following rules have been remapped to new rule codes:

Stabilization

... (truncated)

Changelog

Sourced from ruff's changelog.

0.8.0

Check out the blog post for a migration guide and overview of the changes!

Breaking changes

See also, the "Remapped rules" section which may result in disabled rules.

  • Default to Python 3.9

    Ruff now defaults to Python 3.9 instead of 3.8 if no explicit Python version is configured using ruff.target-version or project.requires-python (#13896)

  • Changed location of pydoclint diagnostics

    pydoclint diagnostics now point to the first-line of the problematic docstring. Previously, this was not the case.

    If you've opted into these preview rules but have them suppressed using noqa comments in some places, this change may mean that you need to move the noqa suppression comments. Most users should be unaffected by this change.

  • Use XDG (i.e. ~/.local/bin) instead of the Cargo home directory in the standalone installer

    Previously, Ruff's installer used $CARGO_HOME or ~/.cargo/bin for its target install directory. Now, Ruff will be installed into $XDG_BIN_HOME, $XDG_DATA_HOME/../bin, or ~/.local/bin (in that order).

    This change is only relevant to users of the standalone Ruff installer (using the shell or PowerShell script). If you installed Ruff using uv or pip, you should be unaffected.

  • Changes to the line width calculation

    Ruff now uses a new version of the unicode-width Rust crate to calculate the line width. In very rare cases, this may lead to lines containing Unicode characters being reformatted, or being considered too long when they were not before (E501).

Removed Rules

The following deprecated rules have been removed:

Remapped rules

The following rules have been remapped to new rule codes:

Stabilization

... (truncated)

Commits


Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore ` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore ` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore ` will remove the ignore condition of the specified dependency and ignore conditions
codecov[bot] commented 5 days ago

Codecov Report

All modified and coverable lines are covered by tests :white_check_mark:

Project coverage is 100.00%. Comparing base (644396b) to head (349d92b). Report is 1 commits behind head on main.

Additional details and impacted files ```diff @@ Coverage Diff @@ ## main #355 +/- ## ========================================= Coverage 100.00% 100.00% ========================================= Files 161 161 Lines 4645 4645 Branches 777 777 ========================================= Hits 4645 4645 ```

:umbrella: View full report in Codecov by Sentry.
:loudspeaker: Have feedback on the report? Share it here.

🚨 Try these New Features:

github-actions[bot] commented 4 days ago

Test Results (ubuntu)

path passed subtotal
tests/test_afgs.py 2 2
tests/test_alias_dict.py 1 1
tests/test_all_device_drivers.py 101 101
tests/test_alternative_connection_addresses.py 19 19
tests/test_awgs.py 4 4
tests/test_config_parser.py 40 40
tests/test_device_manager.py 17 17
tests/test_devices_legacy_tsp_ieee_cmds.py 3 3
tests/test_extension_mixin.py 1 1
tests/test_generate_waveform.py 6 6
tests/test_helpers.py 72 72
tests/test_ieee_scpi_cmds.py 1 1
tests/test_logging.py 4 4
tests/test_margin_testers.py 5 5
tests/test_pi_device.py 1 1
tests/test_psu.py 1 1
tests/test_rest_api_device.py 10 10
tests/test_scopes.py 9 9
tests/test_singleton.py 1 1
tests/test_smu.py 4 4
tests/test_ss.py 1 1
tests/test_tm_devices.py 425 425
tests/test_unsupported_device_type.py 1 1
tests/test_verification_functions.py 6 6
TOTAL 735 735

Link to workflow run

github-actions[bot] commented 4 days ago

Test Results (windows)

path passed subtotal
tests\test_afgs.py 2 2
tests\test_alias_dict.py 1 1
tests\test_all_device_drivers.py 101 101
tests\test_alternative_connection_addresses.py 19 19
tests\test_awgs.py 4 4
tests\test_config_parser.py 40 40
tests\test_device_manager.py 17 17
tests\test_devices_legacy_tsp_ieee_cmds.py 3 3
tests\test_extension_mixin.py 1 1
tests\test_generate_waveform.py 6 6
tests\test_helpers.py 72 72
tests\test_ieee_scpi_cmds.py 1 1
tests\test_logging.py 4 4
tests\test_margin_testers.py 5 5
tests\test_pi_device.py 1 1
tests\test_psu.py 1 1
tests\test_rest_api_device.py 10 10
tests\test_scopes.py 9 9
tests\test_singleton.py 1 1
tests\test_smu.py 4 4
tests\test_ss.py 1 1
tests\test_tm_devices.py 425 425
tests\test_unsupported_device_type.py 1 1
tests\test_verification_functions.py 6 6
TOTAL 735 735

Link to workflow run

github-actions[bot] commented 4 days ago

Test Results (macos)

path passed subtotal
tests/test_afgs.py 2 2
tests/test_alias_dict.py 1 1
tests/test_all_device_drivers.py 101 101
tests/test_alternative_connection_addresses.py 19 19
tests/test_awgs.py 4 4
tests/test_config_parser.py 40 40
tests/test_device_manager.py 17 17
tests/test_devices_legacy_tsp_ieee_cmds.py 3 3
tests/test_extension_mixin.py 1 1
tests/test_generate_waveform.py 6 6
tests/test_helpers.py 72 72
tests/test_ieee_scpi_cmds.py 1 1
tests/test_logging.py 4 4
tests/test_margin_testers.py 5 5
tests/test_pi_device.py 1 1
tests/test_psu.py 1 1
tests/test_rest_api_device.py 10 10
tests/test_scopes.py 9 9
tests/test_singleton.py 1 1
tests/test_smu.py 4 4
tests/test_ss.py 1 1
tests/test_tm_devices.py 425 425
tests/test_unsupported_device_type.py 1 1
tests/test_verification_functions.py 6 6
TOTAL 735 735

Link to workflow run