Closed einencool closed 3 years ago
Seems it is the sender misbehaving. I have uploaded a new edge version - GCode Sender Edge.8.10.zip, can you try that?
Yes, this seems to work now.
I have seen, that the problem orrurs much stronger with the old Version, when I have for example my motors not powered, and so the E-Stop is still active, and I then started the software.
The clickbox witht the E-Stop alarm didn't occur. this is now working with the 8.10 sender.
In the beginning with the 8.9 Version I was so happy, that the message didn't come up, but I didn't mention, that there are other problems after that... :-)
Good Morning @terjeio I tried your new Sender from your side, and have installed the GRBLHal Version from last week.
Today I tested something and had to press the E-Stop Button, but now I'm not able to delete the "Alarm:10" state... And I can't move the machine
:EDIT: After around 2 minutes the error has been gone, but I don't know, why there is such a big delay in it...![image](https://user-images.githubusercontent.com/37541729/109384273-0071b900-78ec-11eb-9d2a-6d5974fb64cf.png)