Not working with MSI 2080 Trios X

Hi,

Here is the dxe driver configuration info:

isDirty: 0 OptionFlags: 0x02 nPciBarSize: 0 nGPUSelectorCount: 1 GPUSelector1: deviceID: 1E87 GPUSelector1: subsysVendorID: FFFF GPUSelector1: subsysDeviceID: FFFF GPUSelector1: bus: FF GPUSelector1: device: FF GPUSelector1: function: FF GPUSelector1: barSizeSelector: 9 GPUSelector1: overridebarSizeMask: 0

    nGPUConfigCount:   1
            GPUConfig1:    deviceID:        1E87
            GPUConfig1:    subsysVendorID:  1462
            GPUConfig1:    subsysDeviceID:  3726
            GPUConfig1:    bus:             03
            GPUConfig1:    device:          00
            GPUConfig1:    function:        0
            GPUConfig1:    BAR0 base:       0xFA00'0000
            GPUConfig1:    BAR0 top:        0xFAFF'FFFF

    nBridgeCount:      1
            BridgeConfig1: vendorID:        8086
            BridgeConfig1: deviceID:        6F08
            BridgeConfig1: bus:             00
            BridgeConfig1: device:          03
            BridgeConfig1: function:        0
            BridgeConfig1: secondary bus:   03

System

Motherboard: MSI X99A Godlike
BIOS Version: 1A
GPU: MSI 2080 Trios X
[x ] CSM is turned off. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
[x ] 4G decoding is enabled. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
[ ] UEFIPatch is applied (see Using UEFIPatch for more information). On some motherboards DSDT Patching is also needed
[ x] I have read Common issues (and fixes)

Description

The issue is that I can't get it activated. Installed the FFS file via UEFITool and updated the bios with M-Flash. How can I tell that the module is loaded and is working as I can not see via gpu-z that it is at all.

Thank you

terminatorul / NvStrapsReBar

Not working with MSI 2080 Trios X #95