search

tesa-klebeband / RTL8720dn-Deauther

My ESP32-Deauther ported to the RTL8720dn, allowing users to deauthenticate on 5GHz now!
GNU General Public License v3.0
18 stars 4 forks source link

Can't get the device to scan 5Ghz networks #8

Open Cervidae71 opened 1 day ago

Cervidae71 commented 1 day ago

Hi, i'm using the default code on a RTL8720dn board. The original firmware was erased and uploading the sketch worked. Once running, i connect to the accesspoint, login but it seems only to detect 2.4ghz networks. I have tried setting up 1 and 2 5ghz accesspoints but they remain undetected as well others in the neighbourhood. Could it be the board? or is it a setting in the code to enable scanning 5ghz?

tesa-klebeband commented 1 day ago

Hi, are you sure you selected the right board when uploading? I know there is a similar sounding board without 5G support. Please check. If it doesn't work this way, it might be a problem with the board you are using.

Cervidae71 commented 1 day ago

Hi tnx for responding so fast. i have the ameba ai thinker 8720dn board installed and selected. It might be the board then. try to get another one.

tesa-klebeband commented 1 day ago

Maybe you could try posting a screenshot of the arduino-ide's settings and I could look over it, cause just the 5Ghz transmitter and receiver being defect and everything else working would be really weird.

ilbossdelfaidate commented 1 day ago

purple module don't work hardware issues (wrong pinout on pcb , wrong connection internal to bw16 module and , diplexer soldered upsidedown), black mordule work