Open johnnyman727 opened 8 years ago
The normal module pins are also zero indexed aren't they? On Dec 19, 2015 4:49 PM, "Jon" notifications@github.com wrote:
Required:
- Add the CE/FCC http://www.sxmregulator.sx/sites/default/files/imagecache/view-850/sites/default/files/fcc_and_ce_logo.jpg logo to a convenient place on the bottom of the board
- Update the revision tag to TM-T2-06 (the changes with CE-approved electronics should have been TM-T2-05 but we didn't update the silk)
- Change "Made with love by Technical Machine" to "Made with love by The Tessel Project
Optional:
- @tcr https://github.com/tcr mentioned the desire to update the silk screen next to each of the pins but I'm not sure exactly what to change them to or if we even have room
- @rwaldron https://github.com/rwaldron would like the Servo Module to have it's pins zero indexed instead of 1 for compatibility with the Johnny-Five library.
Anyone else have thoughts on this? @jiahuang https://github.com/jiahuang @Frijol https://github.com/Frijol @kevinmehall https://github.com/kevinmehall @tcr https://github.com/tcr @rwaldron https://github.com/rwaldron
— Reply to this email directly or view it on GitHub https://github.com/tessel/t2-hardware/issues/11.
for compatibility with the Johnny-Five library.
s/Johnny-Five library/universe/
All resources for that chip assume 0 indexing—the servo module is just wrong
Also, it works fine with Johnny-Five.
what Rick said
:-(
Love y'all but seriosuly
:-(
sounds good to me! The only thing I wish was better is that the labeling of what each of the pins actually is is on the back, and no one looks there... but not sure there's room on the silk to fix this.
I love pin labeling it makes life so much easier.
:+1: pin labels
😃
Hello Tessel-Team 😄
maybe this is not the right place for the question but it came up while planing a low scaled product.
Are there any cases you use with the Tessel 2 like those from Spark-Fun ?
It is about fitting external ports or used modules and of cause the screws the Tessel itself provides 4 holes to fix it in the case.
I think this is one of my major things I am unsure using the Tessel for a product (RasPi has a case on Spark Fun). If I would find a useful box I can put on a sticker ... this would be a great thing.
@studentdanbu you might want to ask on Tessel Slack in the #community channel. I believe someone has made cases for T2 before.
Required:
TM-T2-06
(the changes with CE-approved electronics should have beenTM-T2-05
but we didn't update the silk)Optional:
Anyone else have thoughts on this? @jiahuang @Frijol @kevinmehall @tcr @rwaldron