I follow the guideline for installing t2-cli, but it seem my Mac OS X system can't complete the install of t2-cli.
Do I need to change the version of node?
node-pre-gyp info it worked if it ends with ok
node-pre-gyp verb cli [ '/usr/local/bin/node',
node-pre-gyp verb cli '/usr/local/lib/node_modules/t2-cli/node_modules/usb/node_modules/.bin/node-pre-gyp',
node-pre-gyp verb cli 'install',
node-pre-gyp verb cli '--fallback-to-build' ]
node-pre-gyp info using node-pre-gyp@0.6.30
node-pre-gyp info using node@8.4.0 | darwin | x64
node-pre-gyp verb command install []
node-pre-gyp info check checked for "/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node" (not found)
node-pre-gyp http GET https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz
node-pre-gyp http 404 https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz
node-pre-gyp ERR! Tried to download: https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for usb@1.2.0 and node@8.4.0 (node-v57 ABI) (falling back to source compile with node-gyp)
node-pre-gyp http Pre-built binary not available for your system, looked for https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz
node-pre-gyp verb command build [ 'rebuild' ]
gyp ERR! configure error
gyp ERR! stack Error: Python executable "/anaconda/bin/python" is v3.6.1, which is not supported by gyp.
gyp ERR! stack You can pass the --python switch to point to Python >= v2.5.0 & < 3.0.0.
gyp ERR! stack at PythonFinder.failPythonVersion (/usr/local/lib/node_modules/node-gyp/lib/configure.js:492:19)
gyp ERR! stack at PythonFinder. (/usr/local/lib/node_modules/node-gyp/lib/configure.js:474:14)
gyp ERR! stack at ChildProcess.exithandler (child_process.js:262:7)
gyp ERR! stack at emitTwo (events.js:125:13)
gyp ERR! stack at ChildProcess.emit (events.js:213:7)
gyp ERR! stack at maybeClose (internal/child_process.js:927:16)
gyp ERR! stack at Socket.stream.socket.on (internal/child_process.js:348:11)
gyp ERR! stack at emitOne (events.js:115:13)
gyp ERR! stack at Socket.emit (events.js:210:7)
gyp ERR! stack at Pipe._handle.close [as _onclose] (net.js:545:12)
gyp ERR! System Darwin 16.6.0
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node" "--module_name=usb_bindings" "--module_path=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding"
gyp ERR! cwd /usr/local/lib/node_modules/t2-cli/node_modules/usb
gyp ERR! node -v v8.4.0
gyp ERR! node-gyp -v v3.6.2
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/local/bin/node /usr/local/lib/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node --module_name=usb_bindings --module_path=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding' (1)
node-pre-gyp ERR! stack at ChildProcess. (/usr/local/lib/node_modules/t2-cli/node_modules/usb/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack at emitTwo (events.js:125:13)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:213:7)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:927:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:211:5)
node-pre-gyp ERR! System Darwin 16.6.0
node-pre-gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/t2-cli/node_modules/usb/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /usr/local/lib/node_modules/t2-cli/node_modules/usb
node-pre-gyp ERR! node -v v8.4.0
node-pre-gyp ERR! node-pre-gyp -v v0.6.30
node-pre-gyp ERR! not ok
Failed to execute '/usr/local/bin/node /usr/local/lib/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node --module_name=usb_bindings --module_path=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding' (1)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! usb@1.2.0 install: node-pre-gyp install --fallback-to-build
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the usb@1.2.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /Users/labfnp/.npm/_logs/2017-09-02T11_33_47_308Z-debug.log`
I follow the guideline for installing t2-cli, but it seem my Mac OS X system can't complete the install of t2-cli. Do I need to change the version of node?
`LabFnPdeMacBook-Pro:~ labfnp$ node -v v8.4.0 LabFnPdeMacBook-Pro:~ labfnp$ npm -v 5.3.0 LabFnPdeMacBook-Pro:~ labfnp$ npm install -g t2-cli /usr/local/bin/t2 -> /usr/local/lib/node_modules/t2-cli/bin/tessel-2.js /usr/local/bin/cargo-tessel -> /usr/local/lib/node_modules/t2-cli/bin/cargo-tessel.js
node-pre-gyp info it worked if it ends with ok node-pre-gyp verb cli [ '/usr/local/bin/node', node-pre-gyp verb cli '/usr/local/lib/node_modules/t2-cli/node_modules/usb/node_modules/.bin/node-pre-gyp', node-pre-gyp verb cli 'install', node-pre-gyp verb cli '--fallback-to-build' ] node-pre-gyp info using node-pre-gyp@0.6.30 node-pre-gyp info using node@8.4.0 | darwin | x64 node-pre-gyp verb command install [] node-pre-gyp info check checked for "/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node" (not found) node-pre-gyp http GET https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz node-pre-gyp http 404 https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Tried to download: https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz node-pre-gyp ERR! Pre-built binaries not found for usb@1.2.0 and node@8.4.0 (node-v57 ABI) (falling back to source compile with node-gyp) node-pre-gyp http Pre-built binary not available for your system, looked for https://github.com/tessel/node-usb/releases/download/1.2.0/usb_bindings-v1.2.0-node-v57-darwin-x64.tar.gz node-pre-gyp verb command build [ 'rebuild' ] gyp ERR! configure error gyp ERR! stack Error: Python executable "/anaconda/bin/python" is v3.6.1, which is not supported by gyp. gyp ERR! stack You can pass the --python switch to point to Python >= v2.5.0 & < 3.0.0. gyp ERR! stack at PythonFinder.failPythonVersion (/usr/local/lib/node_modules/node-gyp/lib/configure.js:492:19) gyp ERR! stack at PythonFinder. (/usr/local/lib/node_modules/node-gyp/lib/configure.js:474:14)
gyp ERR! stack at ChildProcess.exithandler (child_process.js:262:7)
gyp ERR! stack at emitTwo (events.js:125:13)
gyp ERR! stack at ChildProcess.emit (events.js:213:7)
gyp ERR! stack at maybeClose (internal/child_process.js:927:16)
gyp ERR! stack at Socket.stream.socket.on (internal/child_process.js:348:11)
gyp ERR! stack at emitOne (events.js:115:13)
gyp ERR! stack at Socket.emit (events.js:210:7)
gyp ERR! stack at Pipe._handle.close [as _onclose] (net.js:545:12)
gyp ERR! System Darwin 16.6.0
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node" "--module_name=usb_bindings" "--module_path=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding"
gyp ERR! cwd /usr/local/lib/node_modules/t2-cli/node_modules/usb
gyp ERR! node -v v8.4.0
gyp ERR! node-gyp -v v3.6.2
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/local/bin/node /usr/local/lib/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node --module_name=usb_bindings --module_path=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding' (1)
node-pre-gyp ERR! stack at ChildProcess. (/usr/local/lib/node_modules/t2-cli/node_modules/usb/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack at emitTwo (events.js:125:13)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:213:7)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:927:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:211:5)
node-pre-gyp ERR! System Darwin 16.6.0
node-pre-gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/t2-cli/node_modules/usb/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /usr/local/lib/node_modules/t2-cli/node_modules/usb
node-pre-gyp ERR! node -v v8.4.0
node-pre-gyp ERR! node-pre-gyp -v v0.6.30
node-pre-gyp ERR! not ok
Failed to execute '/usr/local/bin/node /usr/local/lib/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding/usb_bindings.node --module_name=usb_bindings --module_path=/usr/local/lib/node_modules/t2-cli/node_modules/usb/src/binding' (1)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! usb@1.2.0 install:
node-pre-gyp install --fallback-to-build
npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the usb@1.2.0 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above.npm ERR! A complete log of this run can be found in: npm ERR! /Users/labfnp/.npm/_logs/2017-09-02T11_33_47_308Z-debug.log`