search

thainnos / LICSTER

A Low-cost ICS Security Testbed for Education and Research
Other
100 stars 33 forks source link

Files to order the PCB at JLCPCB #10

Closed astviken closed 4 years ago

astviken commented 4 years ago

Hi, I am ready to order the PCB at JLCPCB. But I am little bit confused...

You wrote: ”In the folder Fabrication (LICSTER/devices/remote_io/hardware/Fabrication/) you find all the files needed to order the PCB. In the case of JLCPCB, you need only zip them together and upload them to upload.”

But I see some similar files (KiCad_Shield-B.Adhes.gbr and KiCad_Shield-B_Adhes.gbr). Which of them should I send to JLCPCB? Is it all files which comment with "Added JLCPCB" should I use for my PCB order at JLCPCB?

Thanx

mniedermaier commented 4 years ago

Hi,

you are right. I regenerated the KiCad plot files and I think that KiCad changed there naming from dot separated naming to underscore. I made a new commit and removed the duplicates.

If you want to get most of the SMD parts assembled, you can order a pre-assembled PCB, if you add the assemble step and upload the files located at https://github.com/hsainnos/LICSTER/tree/master/devices/remote_io/hardware/JLCPCB

Thank you for being a part of the LICSTER community :) If you have any questions or hints, feel always free to write us.

astviken commented 4 years ago

I created an order of a PCB at JLCPCB but my order was canceled. JLCPCB informs me about failure reason: "There is no drill in your file, please kindly check, thanks!" I used the files In the folder Fabrication for PCB and files from JLCPCB folder to order a pre-assembled PCB. In PCB preview I could see some red markings (please see attached picture). Has anyone in the project tested ordering a pre-assembled PCBs?

I may misunderstand things

PCB SMD PCB

thanks a lot and best regards, Alexander

mniedermaier commented 4 years ago

Hello Alexander,

I created an order of a PCB at JLCPCB but my order was canceled. JLCPCB informs me about failure reason: "There is no drill in your file, please kindly check, thanks!"

Indeed the drill files were accidentally deleted in commit 0451ce7af4cc65a2caf95066a136feeff0c86d76. I have restored them now (6a7ee2ce86ee0da06785542f588828e4d4621124).

In PCB preview I could see some red markings (please see attached picture). Has anyone in the project tested ordering a pre-assembled PCBs?

I tested the ordering of the pre-assembled PCBs myself. Some notes to the PCB:

Thank you and regards

Matthias

astviken commented 4 years ago

Thank you and regards Alexander

432teast commented 4 years ago

Hi, any updates on the pre-assembled PCBs yet?

I havent been soldering since I learnt that the wrong transistors were mentioned. I'm feeling like buying the PCBs with all components on them:)

Kind regards, Teast

mniedermaier commented 4 years ago

Hello,

I havent been soldering since I learnt that the wrong transistors were mentioned. I'm feeling like buying the PCBs with all components on them:)

The transistor from JLPCB is different to them in the schematics, but is a replacement and is working. JLPCB does not solder the THT components and also the 5 resistors for the ID must be soldered by yourself (R31, R34, R38, R40 and R42 for remote IO 1 -- R32, R33, R38, R40 and R42 for remote IO 2)

Regards

Matthias