Hi guys, first of all many thanks for your wonderful products.
I installed a WB3.1 environment (with Minimig AGA 1.0 and 150715 firmware) and
I can say that all is working *really* great (with two 2GB partitions that I
can happily mount r/w on linux) and the system is pretty fast, too.
The only problem I have (but very annoying) is that I couldn't manage to
configure any workbench screenmode better than PAL HiRes 640x256 ... well, also
PAL HiRes Laced 640x512 actually works but for sure it's not a good solution.
Mist board is connected through vga to a 1920x1080 led monitor, and I tried
another lcd and a crt, too, but the problem seems to be related to the driver.
I already tried all the drivers found in Storage/Monitors to see if some other
driver would work better but had no luck.
I read that 720x576 should be available, too...
Can you please give me some hints about it?
Original issue reported on code.google.com by claudio....@gmail.com on 12 Aug 2015 at 12:08
Original issue reported on code.google.com by
claudio....@gmail.comon 12 Aug 2015 at 12:08