Test 0.0.3.3 pre-release of IoCare integration

[theglus]

Requirements

• [x] Provide testing report for 0.0.3.3 pre-release.

Testing Instructions

First of all, I need to test if everything works out from onboarding, so, I will need for you all to please delete the integration (from the Home Assistant integration page) if you currently have it set up.

After doing so, go to HACS, select Integrations and find the Coway integration card. On the coway card, select the overflow menu (three vertical dots) and click on redownload. After doing so be sure Show beta versions is selected. You should then be able to select version 0.0.3.2. Install it, restart Home Assistant, and set the integration up through the Home Assistant integrations page.

Things I need tested:

• [x] Confirm that an AQI sensor is not created for your purifier
• [x] Test turning purifier on and off
• [x] Test turning purifier light on and off
• [x] Test setting purifier preset mode to auto and to night
• [x] Test setting purifier fan speed to each of the three levels as well as 0 (this should turn the purifier off)
• [x] Test setting the timer to 1 hour, 2 hours, 4 hours, and 8 hours. Also setting the timer to off.

[theglus]

Testing report for 0.0.33 pre-release

• [x] Deleted integration from the HA Integrations page.
• [x] Rebooted Home Assistant.
• [x] Redownloaded Coway integration, installing beta version 0.0.3.3.
• [x] Rebooted Home Assistant.
• [x] Confirmed that an AQI sensor is not created for your purifier
• [x] Tested turning purifier on and off
• [x] Tested turning purifier light on and off
• [x] Tested setting purifier preset mode to auto and to night
• [x] Tested setting purifier fan speed to each of the three levels as well as 0 (this should turn the purifier off)
• [x] Tested setting the timer to 1 hour, 2 hours, 4 hours, and 8 hours. Also setting the timer to off.