Open cheechie opened 5 years ago
I am doing the same for my Bali wooden blinds.
On Tue, May 28, 2019, 7:20 AM cheechie notifications@github.com wrote:
My blinds (from Home Depot) are slightly different so I had to make a new servo holder. Here is the STL file. https://www.thingiverse.com/thing:3658592
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/thehookup/Motorized_MQTT_Blinds/issues/6?email_source=notifications&email_token=AL2NBQF33L6W3UZZILHFIBTPXU5SZA5CNFSM4HQD4Z2KYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4GWHYAGA, or mute the thread https://github.com/notifications/unsubscribe-auth/AL2NBQEEFXCC4QF2HI25OC3PXU5SZANCNFSM4HQD4Z2A .
Thanks @cheechie for taking the time to post your holder. Worked great for my blinds as well.
@cheechie , could you please take a picture of your blinds? i got mine from HD and i just want to make sure. also, when you print the STL file, are the units of measurement in mm, cm, or inches? thanks!
i missed it by 1cm using the STL file he posted. is that the same issue you experienced? https://i.imgur.com/wSi4AtZ.jpg
can you just slide the servo closer. Thats all I had to do.
Here is a picture of mine. https://ibb.co/QrtFVKD
it is already close but wont fit because the motor is 1cm higher than the hex stick.
i just printed your modified STL file and i am happy to say it fits like a glove! wow. here it is in its new home https://i.imgur.com/D0F5GWl.jpg thanks for posting.
Thank you for posting @cheechie! And thank you @thehookup for this awesome guide! I needed to make some tweaks for my home depot blinds, but so far so good :) In case anyone needs them, here are my customizations: https://www.thingiverse.com/thing:4314465
Thank you @cheechie! This fits perfectly! Did you have to change the rotations from 12 to something else?
@cheechie Thank you. This fit snuggly in my blinds!
This also solved my fit problem, thanks for sharing!
My blinds (from Home Depot) are slightly different so I had to make a new servo holder. Here is the STL file. https://www.thingiverse.com/thing:3658592