reaver 1.4 stops at: Sending identity response

[GoogleCodeExporter]

A few things to consider before submitting an issue:

0. We write documentation for a reason, if you have not read it and are
having problems with Reaver these pages are required reading before
submitting an issue:
http://code.google.com/p/reaver-wps/wiki/HintsAndTips
http://code.google.com/p/reaver-wps/wiki/README
http://code.google.com/p/reaver-wps/wiki/FAQ
http://code.google.com/p/reaver-wps/wiki/SupportedWirelessDrivers
1. Reaver will only work if your card is in monitor mode.  If you do not
know what monitor mode is then you should learn more about 802.11 hacking
in linux before using Reaver.

Got it in monitor mode:

mon0        Intel 5100  iwlwifi - [phy0]
wlan0       Intel 5100  iwlwifi - [phy0]

2. Using Reaver against access points you do not own or have permission to
attack is illegal.  If you cannot answer basic questions (i.e. model
number, distance away, etc) about the device you are attacking then do not
post your issue here.  We will not help you break the law.

It's on my own network. Link Quality=50/70  Signal level=-60 dBm

3. Please look through issues that have already been posted and make sure
your question has not already been asked here: http://code.google.com/p
/reaver-wps/issues/list

4. Often times we need packet captures of mon0 while Reaver is running to
troubleshoot the issue (tcpdump -i mon0 -s0 -w broken_reaver.pcap).  Issue
reports with pcap files attached will receive more serious consideration.

Answer the following questions for every issue submitted:

0. What version of Reaver are you using?  (Only defects against the latest
version will be considered.)

1.4

1. What operating system are you using (Linux is the only supported OS)?

Ubuntu 12.04

2. Is your wireless card in monitor mode (yes/no)?

Yes

3. What is the signal strength of the Access Point you are trying to crack?

Link Quality=50/70  Signal level=-60 dBm

4. What is the manufacturer and model # of the device you are trying to
crack?

Comtrend ct-5361

Board ID:                  96348A-122
Software Version:          A111-306TLF-C02_R16
Bootloader (CFE) Version:  1.0.37-6.8
Wireless Driver Version:   4.150.10.5.cpe2.0
ADSL Version:              A2pB025c8.d21j

5. What is the entire command line string you are supplying to reaver?

sudo ./reaver -i mon0 -b 64:68:0C:4A:49:18 -vv

6. Please describe what you think the issue is.

I don't know if my router is vulnerable (but it have wps activated), or if my 
card is supported.

7. Paste the output from Reaver below.

[+] Waiting for beacon from 64:68:0C:4A:49:18
[+] Switching mon0 to channel 1
[+] Associated with 64:68:0C:4A:49:18 (ESSID: WIFI)
[+] Trying pin 12345670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response

Here the capture: http://www.4shared.com/file/CVN69eBZ/reaver_cap.html
It stops at the request "Expanded Type (Wifi Alliance, WifiProtectedSetup)"

Original issue reported on code.google.com by rodarima on 12 Sep 2012 at 6:41

[GoogleCodeExporter]

I Have The same problem please Help

Original comment by anassb...@gmail.com on 6 Jan 2013 at 9:30

[GoogleCodeExporter]

Also me...i have the same problem. Have someone found a solution?

Original comment by robsmith...@gmail.com on 21 Jan 2013 at 12:35

[GoogleCodeExporter]

Also me! Help!!!

Original comment by benitocappellania on 1 Feb 2013 at 2:26